Skip to content
+ 31 (0)75 614 90 40
info@loeneninstruments.com
Contact
  • Log In | Log Out
  • Register
  • Account details
  • Log In | Log Out
  • Register
  • Account details
0
€ 0,00
×
  • Accessories for Microscopy
  • Instruments
  • Accessories for Microscopy
  • Instruments
Home / Accessories for Microscopy / Nanotechnology / Calibration / SEM Calibration / Line/Grid Standards

Line/Grid Standards

Products

Line/Grid Standards

  • Adhesives
    • Conductive
    • Mounting Adhesives
    • Non Conductive
      • Non Conductive
      • Tapes
    • Tabs, Tapes & Sheets
  • AFM & SPM
    • AFM-STM Supplies
    • Colloids & Nanoparticles
      • Gold and Silica Shell Gold Colloid
      • Highly Uniform Gold Particles
      • Silver Colloids & Nanoparticles
    • Substrates
  • Apertures
    • Apertures 1,85 x 0,1mm
    • Apertures 2,0 x 0,1mm
    • Apertures 2,0 x 0,25mm
    • Apertures 2,0 x 0,6mm
    • Apertures 3,0 x 0,1mm
    • Apertures 3,0 x 0,25mm
    • Apertures 3,04 x 0,25mm
    • Apertures 4,0 x 0,2mm
    • Apertures 4,0 x 0,6mm
    • Apertures 6.35 x 0.02mm
    • Apertures 6,35 x 0,125mm
    • Apertures 10,0 x 0,1mm
    • Apertures 10,0 x 0,6mm
    • Apertures 12,0 x 0,1mm
    • Apertures 19,99 x 0,25mm
    • Gilded strip apertures
    • Multihole Strip Apertures
    • Spray Apertures
    • Thin Foil Apertures
    • Tantalum Wehnelt
    • Top Hat Apertures
    • Aperture Cleaning
  • Brushes
  • Calibration
    • AFM Calibration
      • AFM Gold Calibration Kit
      • AFM-SPM calibration
      • High Resolution Calibration
      • MRS-3
      • MRS-4
      • MRS-6
      • Test Gratings
      • Very High Resolution Calibration
    • Calibration Calculators
    • EDS/WDS/EPMA/XPS
      • NiOx Test Specimen
      • Pelco Faraday Cup
      • UHV-EL Reference Standards
      • X-Ray References Calibration
      • XCS EDS Calibration
    • GSR & Particle Analysis
    • Light Microscopy
      • LM Calibration Standards
      • Stage Micrometers
      • Stage Micrometers Pro Series
    • SEM Calibration
      • (CD) Calibration Test
      • Back Scattered Electron Test
      • Boron substrates
      • Chessy test specimen
      • Critical Dimension Magnification Standards
        • CDMS
        • CDMS ISO
        • CDMS-XY
        • CDMS-XY ISO
        • Etched Si CDMS
        • Etched Si CDMS-XY
        • Etched Si CDMS ISO
        • EEtched Si CDMS-XY ISO
      • Demonstration Specimens
      • Glass size standards
      • Gold on Carbon
      • Line/Grid Standards
      • Low & Medium Magnification
      • MRS-3
      • MRS-4
      • MRS-6
      • Polystyrene Spheres
      • Silicon test specimen
      • Tin on Carbon
    • TEM Calibration
      • Astigmatism Correction
      • Calibration Test Kit
      • Lattice Plane Resolution Checks
      • MAG*I*CAL
      • TEM/STEM Test Specimens
  • Chemicals
    • Buffers
    • Citifluor
    • De- and rehydrating agents
    • Embedding
      • Embedding Components
      • Embedding kits
      • Mountants
    • Fixatives
    • Stains
      • Stains for EM
      • Stains for LM
  • Cleaning
    • Anti-Static Products
    • Applicator, Sticks & Swabs
    • Cleaning Brushes
    • Cleaning Detergents
    • Lab Bench Cover, Spill Tray
    • Polishing Compounds
    • Pressurized Cleaners
    • ProPette
    • Skin Protectants
    • Spill Response Kits
    • Ultrasonic Cleaners
    • Wipes, Cloths and Tissues
  • Cryo Products
    • Cryo Accessories
    • Cryo Embedding
    • Cryo Gloves & Aprons
      • Cryo Aprons
      • Cryo Gloves
      • Waterproof Cryo Gloves
    • Cryo Pucks
    • Cryo Storage
    • Dewar Flasks
      • Bio Series
      • Enamelled steel
      • High Capacity
      • Low Form, Wide Neck
      • Stainless Steel
    • Eyelashes
    • Laboratory Tape
    • UltrAuFoil® Holey Gold Films
    • Vitrobot Consumables
  • Desiccators Cabinets
    • Acrylic
    • Black Desiccator Cabinets
    • Desiccant
    • Desiccator Accessories
    • Large Capacity
    • Small
    • Vacuum Desiccators
  • Diamond Knives
    • AFM
    • Cryo 35 Wet-Dry
    • Cryo 45° Wet – Dry
    • Cryo Immuno
    • Cryotrim
    • Histo
    • Histo Cryo Wet – Dry
    • Histo Jumbo
    • Ultra 35°
    • Ultra 45°
    • Ultra Sonic
    • Diamond Knife Cleaning
  • Dissection
    • Blades
    • Bone Cutters
    • Bone Saws
    • Brain and Biopsy Punches
    • Elevators & Dissectors
    • Forceps
      • Aesculap® Forceps
      • General Purpose
      • LED Forceps and Scissors
      • Locking Forceps
    • Scalpels
    • Scissors
      • Aesculap®
      • General Lab
      • General Purpose
      • Micro Scissors
  • Embedding
    • ACLAR® Film
    • Beem® Products
      • BEEM® Capsules
      • BEEM® Storage
    • Castable Embedding Supplies
    • Critical Point Dryer Accessories
    • Disposable Molds
    • Embedding Cassettes
    • Embedding Media
    • Embedding Molds
    • Gelatin Capsules
    • Multi- and Flexible Molds
    • PELCO Locator Molds
    • Syringes & Pipettes
  • FIB Supplies
    • Grid & Sample Holders
    • Omniprobe Supplies
    • PELCO FIB Lift-Out Grids
      • Carb-N-Grids
      • PELCO® Indicator FIB Lift-Out TEM Grids
      • PELCO® FIB Lift-Out TEM Grids
  • Filaments
    • Denka M-3 LaB6 Cathodes
    • Kimball LaB6 Cathodes
    • SEM/TEM Filaments
  • Forensics
    • Carbon Tweezers
    • Forensic Supplies
    • GSR Calibration Kit
  • General Lab Supplies
    • Applicator, Sticks and Swabs
    • Beakers, Cylinders and Containers
    • Cell Strainer System
    • Dishes and Boats
    • Glass Bottom Dishes
    • Laboratory Glassware
    • Laboratory Tongs
    • Microscopy Illuminators
    • Microwave Specimen Holders
    • Parafilm M®, Melinex Film
    • PELCO Rotators
      • R1 Single Speed Rotator
      • R2 Variable Speed Rotator
      • R2 Rotator with Heads with Clips for Test Tubes
    • Petri Dishes
    • Pocket Scales
    • Spatulas & Spoons
    • Storage Jars, Containers & Bottles
      • Bottle Top Dispensers
      • Diamond RealSeal™ Bottles
      • Plastic Carboys
      • RealSeal™ Plastic Bottles
      • Vials and Bottles
    • Thermometers
    • Timers
    • Ultraviolet Lamps
    • Vials, Tubes and Cups
    • Wire Mesh
  • Gloves
    • Gloves for Cryo Applications
    • Laboratory Gloves
  • Grids
    • Grid Staining Matrix System
    • SEM Grids
    • TEM Grids
      • Agar Grids
      • Athene TEM Grids
      • Gilder TEM Grids
      • Grid Coating
      • Grid Holder Blocks
      • Maxtaform™ Grids
      • Pelco Special Metal Grids
      • Pelco TEM Grids
      • QUANTIFOIL® TEM Substrates
      • Reference/Finder Grids
      • Special TEM Grids
      • Staining Pads
      • StrataTek™ TEM Grids
      • SynapTek™ Grids
      • Veco Grids
    • TEM Support Films
      • Carbon
      • Formvar
      • Formvar Carbon
      • Graphene
        • Graphene Oxide Films
        • Graphene TEM
      • Holey Carbon
      • Holey Silicon Nitride
      • Lacey Films
      • Si3N4 Support Film for CLEM
      • Silicon Aperture Frames
      • Silicon Nitride Support Films
      • Silicon Nitride X-Ray Windows
      • UltrAuFoil® Holey Gold Films
  • Histology
    • Citifluor Antifadent
    • Cleaning Products
    • Cryo Sectioning & Storage
      • Cryo Embedding Media
      • Cryo Label Systems
      • Cryo Storage systems
      • Tissue Marking Dyes
    • Embedding & Sectioning
      • Disposable Histology Molds
      • Laboratory Label Systems
      • Mold Kits
      • PAP Pens
    • Glass Bottom Dishes
    • Gross Dissection Tools
      • Dissection Tools
      • LED Forceps and Scissors
      • Tissue Slicing Systems
    • Grossing & Processing
      • Beakers, Cylinders and Containers
      • Blades
      • Embedding Cassettes
      • Marking Pens
      • Vials, Tubes and Cups
    • Histology Instruments
      • CellTec Activated Carbon Filters
      • Hotplates and Centrifuges
      • Magnetic Stirrers
      • Manual Rotary Microtome
      • Paraffin Dispenser, trimmers
      • PELCO BioWave Pro+
      • Pocket Scales
      • Slide Dryers
      • Slide Warmers
      • Thermometers
      • Tissue Section Bath
      • Tissue Slicing
        • SliceMaster
        • TruSlice Digital
        • TruSlice TruSlice Manual
      • Water Baths
    • Immersion Oils
    • Laboratory Tape
    • Microscope Slides
      • Glass Microscope Slides
      • Large Slides
      • Plastic Microscope Slides
      • Quartz Slides and Coverslips
    • Pipettes and Pipettors
      • ali-Q 2 Pipette Controllers
      • Ovation® Pipettes
      • ProPette™ LE Single Channel Pipettors
      • Wobble-Not Pipettes
      • Pipettor Racks
      • Reagent Reservoirs
      • Pipettes tips
        • Universal Pipette tips
        • VistaLab Pipette Tips
      • Plastic Pasteur Pipettes
    • PTFE Laboratory Products
    • Razor- Microtome Blades
    • Safety Products
    • Slide Boxes, Trays & Mailers
    • Slide Labels
    • Spatulas and Spoons
    • Staining
      • Containers with Lid
      • Mounting Media
      • Slide DrainRack
      • Slide Staining System
      • Staining Jars & Racks
      • Vials, Tubes and Cups
    • Weighing Dishes
  • Magnifiers
    • 3D Stereo Glasses
    • Headband Magnifiers
    • Illuminated Magnifiers
    • Magnifier with Table Clamp
    • Magnifying Glass
    • Measuring Magnifiers
    • Photo and Film Magnifiers
    • Pocket Magnifiers
    • Pocket Microscope
    • Reticles
    • Surgical Loupes
  • Material Science
    • Compression Mounting Supplies
    • Crucibles
    • Cutting Fluids
    • Epoxy Mount Kits
    • Metallographic Accessories
    • Mounting Clips
    • PELCO Mounting Waxes
    • Personel Safety
    • Photonic Cleaning Solutions
    • Plastic & Silicone Molds
    • Polishing & Grinding
      • Colloidal Silica Suspensions
      • Diamond Compounds & Pastes
      • Diamond Suspensions
      • PELCO Lapping Discs
      • Lapping Fixtures
      • Polishing Cloths
      • Polishing Compounds
      • Polishing Powders
      • Silicon Carbide Discs
      • Tripod Polisher
    • Sample Clamp
    • Sectioning
      • Low Speed Diamond Saw
      • Wafering Blades
    • Storage Cabinet
  • Microwave Processing
    • PELCO BioWave Pro+
    • BioWave application Kits
      • Electron Microscopy Kit
      • Immunolabeling Kit
      • Paraffin Tissue Processing Kit
      • Decalcification Kit
    • Microwave Accessoires<
      • Accessories and Replacements
      • Equipment
      • Processing
      • Staining
      • Vacuum
  • Nanotechnology
    • Antibody Gold Conjugates
    • Calibration
      • AFM Calibration
        • (CD) Calibration Test
        • AFM Gold Calibration Kit
        • AFM-SPM calibration
        • AFM, STM, SPM Calibration
        • MRS-3
        • MRS-4
        • MRS-6
      • Microanalysis
        • Pelco Faraday Cup
        • GSR & Particle Analysis
        • NiOx Test Specimen
        • X-Ray References Calibration
      • Performance Testing
        • Back Scattered Electron Test
        • Demonstration Specimens
        • Low & Medium Magnification
      • Resolution Standards
        • AuSome™ Resolution Test
        • Gold on Carbon
        • Low & Medium Magnification
        • Tin on Carbon
      • SEM Calibration
        • 2D Holographic Array
        • Critical Dimension (CD)
        • Critical Dimension Magnification
          • CDMS
          • CDMS-XY
          • CDMS ISO
          • CDMS-XY ISO
          • Etched Si CDMS
          • Etched Si CDMS-XY
          • Etched Si CDMS ISO
          • Etched Si CDMS-XY ISO
        • High Resolution Calibration
        • Line/Grid Standards
    • Coated TEM Grids
      • Carbon
      • Formvar
      • Formvar Carbon
      • Graphene Films
        • Graphene Oxide Films
        • Graphene Support Films
      • Holey Carbon
      • Lacey Carbon
      • Silicon Aperture Frames
      • Substratek Metallic Substrates
    • Gold and Silica Shell Gold Colloid
    • Gold Nanoarrays
    • Negative Stains
    • Substrates
  • Neuroscience
    • Black Plastic Products
    • Blades
    • Brain and Tissue Matrices
      • Acrylic
      • Chrome coated
      • Spinal cord
      • Stainless Steel
      • Tumor Matrices
    • Citifluor Solutions
    • Diamond Microtome Knives
      • AFM
      • Cryo 35 Wet-Dry
      • Cryo 45° Wet – Dry
      • Cryo Immuno
      • Cryotrim
      • Histo
      • Ultra 35°
      • Ultra 45°
      • Ultra Sonic
    • Embedding Cassettes
    • Glass Bottom Dishes
    • Instruments
      • Centrifuges
      • McIlwain Tissue Chopper
      • MicroSlicers
      • PELCO easiSlicer
      • PELCO Rotators
        • R1 Single Speed Rotator
        • R2 Variable Speed Rotator
        • R2 Rotator with Heads with Clips for Test Tubes
      • SliceMasters
      • Sterilizers
      • Stirrers
    • Microscope Slides
      • Microscope Slides Glass
      • Microscope Slides Large
      • Microscope Slides Plastic
      • Microscope Slides Quartz
    • PAP Liquid Blocker Pens
    • PTFE Products
    • Slide Boxes
    • Small Animal Research
    • Specimen Holders
    • Staining Jars & Racks
    • Tools for Neuroscience
      • Biopsy Punches
      • Dissection Tools
      • Ear Punches
      • Locking Forceps
      • Needles, Picks & Probes
      • Scalpels
      • Scissors
        • Aesculap
        • High Quality
        • LED Forceps and Scissors
        • Micro Scissors
        • PELCO Scissors
      • Spatulas and Spoons
      • Surgical Bone Cutters
      • Wound Clips
  • Photographic Material
  • Scissors
    • Aesculap
    • General Lab
    • High Quality
    • LED Forceps and Scissors
    • Micro Scissors
    • PELCO Scissors
  • Sectioning
    • Microtome Blades
    • Sapphire Knife
    • Sectioning Supplies
    • Tungsten Carbide Knife
  • SEM Supplies
    • Carbon tabs, tapes & sheets
    • Mount Storage Boxes
    • Planchets
    • Replication Materials
    • Scintillators
    • Specimen Mount Grippers
    • Specimen Preparation Stations
    • Starter Kits
    • Stubs, Mounts and Holders
      • M4 Threaded, Cylinder, and Other Stubs
        • Bulk Specimen Holders, M4
        • Carbon Planchet Holders, M4
        • Carbon, Brass, and Copper Mounts
        • Cross Section Holders
        • Cylinder Specimen Mounts
        • E-Beam Lithography Mount, M4
        • EBSD Pre-tilt Holders & Mounts, M4
        • Filter Holders, M4
        • Flat Sample Clip Holders
        • Hitachi T-base Specimen Holders
        • Metallographic Mount Holders
        • Modular Stage Adapters, M4
        • Mount Adapters, M4
        • Multipurpose Specimen Holder
        • Pin Stub Holders, M4
        • Q Pin Mounts and Holders
        • Rectangular Mounts
        • SEMClamp Holders, M4
        • SEMClip Cylinder Mounts
        • SEMClip Geological
        • STEM Imaging Holder, M4
        • TEM Grid Holder, M4
        • Tilt Specimen Holders
        • Vise Type Holders
        • Wafer & Large Sample Holders
      • Pin Stubs Specimen Mounts and Holders
        • Adapter Buttons
        • Angled Pin Stub Holders
        • Bulk Specimen Holders with Pin
        • Carbon, Brass, and Copper, SEM Mounts
        • E-Beam Lithography Mount
        • EBSD Pre-tilt Holders & Mounts
        • FIB Grid Holders
        • Filter Holders, Pin
        • Jeol Specimen Holders
        • Low Profile FIB Mounts
        • Low Profile SEMClip
        • Metallographic Mount Holders
        • Modular Stage Adapters
        • Mount Adapters
        • Multi Purpose / Bulk Holders
        • Multi-Pin Stub Holders
        • Pin Stub Specimen mounts
        • Planchet Holders
        • Q Pin Stubs and Holders
        • Sample Holder Sets
        • SEMClamp Holders
        • SEMClip Pin Mounts
        • Slotted Pin Stubs
        • STEM Imaging Holder
        • TEM Grid Holders
        • Thin Section Holders
        • Variable Tilt Holders
        • Vise Clamp Holders
        • Wafer Holders with Pin
  • Slides, Coverslips, Storage
    • Microscope Slides Coverslips
    • Microscope Slides Glass
    • Microscope Slides Large
    • Plastic Microscope Slides
    • Microscope Slides Quartz
    • Slide boxes & Trays
  • Sputter Targets
  • Substrates
  • Tabs, Tapes & Sheets
  • TEM Supplies
    • Dissection Supplies
    • Embedding Supplies
      • ACLAR Film
      • Beem Products
        • BEEM Capsules
        • BEEM® Storage
      • Disposable Molds
      • Embedding molds
      • Microcentrifuge Tubes
      • Multi and Flexible Molds
      • Snap-Fit Gelatin Capsules
      • Syringes and Pipettes
    • Eyelashes, Brushes
    • Glass Knives & Accessories
    • Instruments
      • Cryo Chamber
      • Heat Pen
      • PELCO easiGlow
      • PELCO Rotators
        • Single Speed Rotator, R1
        • Variable Speed Rotator, R2
        • Rotator with Heads with Clips for Test Tubes
      • Tissue Processor
    • K-kit for Liquid TEM
    • Loops and Wire
    • Petri Dishes
    • Replication Materials
    • Specimen Holders
    • TEM Checker
    • TEM Grid Boxes
    • Test Specimens
    • Vials and Cube Racks
    • Wheaton Vials
  • Tools
    • Bench Vises
    • Calipers and Micrometers
    • Diamond Scribing Tools
    • Foils
    • Laboratory Lubricants
    • Micro-Tools
      • Measuring Scales
      • Micro Tools - Carbide Tips
      • Micro Tools - Steel Tips
      • Micro Tools - Stainless Steel Tips
      • Technician Sets
    • Needles, Probes & Picks
    • Plastic Pliers
    • Pliers & Side Cutters
    • Screwdrivers and Hex Keys
    • Scribing and Cleaving Kits
    • Workbench Tools
  • Transport & Storage
    • Cabinets for Tissue Cassettes
    • Cardboard, Tin Boxes & Cans
    • Gel-Pak® Substrate Carriers
    • Grid Storage Boxes
    • Compact Modular Cabinet
    • Plastic Jars, Containers & Bottles
    • Membrane Boxes
    • Plastic Storage Boxes
    • Slide Boxes, Trays and Mailers
    • Mount Storage Boxes
    • Wafer Carrier Trays
    • PELCO X-TREME Cases
    • Zipper, Barrier Bags
  • Tweezers
    • Accessories
    • Aesculap® – Forceps
    • Aquarius Tweezers
    • Cantilever Tweezers
    • Carbon Fibre tweezers
    • Dumont™ Tweezers
      • Anti-Capillary
      • Biology
      • Clamping Ring
      • Dumostar
      • Electronic
      • High Precision
      • Manipulating Tweezers
      • Medical
      • Self Closing
      • Titanium
    • General Purpose Forceps
    • Industrial, Economy Tweezers
    • Mount Grippers
    • PELCO Tweezers
      • Biology
      • Ceramic Tips
      • Clean Room Tweezers
      • DLC Coated
      • Economy Tweezers
      • ESD Safe Epoxy Coated
      • ESD Ergonomic
      • Flat and Pad Tips
      • General Purpose
      • Gold Plated
      • High Precision
      • Locking Tweezers
      • Mini
      • PTFE Coated
      • Reverse (self closing)
      • Slim
      • Soft Tips
      • Superalloy, UltraFine Tips
      • Titanium
    • Plastic Tipped ESD Tweezers
    • Plastic Tweezers, Flat & Sharp
    • Plastic, Wafer Tip Styles
    • Surgical Tissue Forceps
    • Wafer Tweezers
    • Wafer, Component, Cover Glass
    • Wire Cutting Tweezers
    • Zirconia Ceramic Tweezers
  • Vacuum Coating
    • Carbon Rods and Wire
    • Evaporation Wire & Pallets
    • Metal Boats
    • Substrates
    • Tungsten Filaments and Coils
    • Tungsten Wire Baskets
  • Vacuum Handling Tools
    • Vacuum Pick-Up Systems
    • Wafer Handling
  • Vacuum Pumps & Supplies
    • Exhaust Filters
    • Vacuum Gauges
    • Vacuum Grease & Sealants
    • Vacuum Pump Oils
    • Vacuum Pumps
      • Diaphragm Vacuum Pump
      • RVP Series Dual Stage Rotary Vane Vacuum Pumps
      • VRI Series Compact
      • VRP Series Heavy Duty
Loading...
Product
Description
Order
Product

Pelcotec LMS-20G Magnification Calibration Standard
The Pelcotec LMS-20G calibration standard for transmitted light microscopy
no. 688-2and 688-22

Description

Pelcotec LMS-20G Magnification Calibration Standard

Large area, resolution 0.01mm

The Pelcotec LMS-20G calibration standard for transmitted light microscopy has been designed for precise magnification calibration and microscope stage calibration.
The 20 x10mm pattern is fabricated with Cr lines on clear soda lime glass.
The glass is fitted in a black metal slide.

Useful in the 5x to 1000x magnification range.

Specifications are:

  • Total calibration area is 20 x 10mm with crossed lines and 0.01mm divisions
  • 75nm Cr lines on clear soda lime g
  • Cross hairs showed on every 0.1mm with larger cross hairs at 0.5 and 1mm over the complete area
  • Glass thickness 550 m 50 m
  • Glass mounted in black metal slide, 76.2×25.4×1.6mm
  • Individual serial number on each Pelcotec LMS-20G calibration standard
  • NIST Traceable version is Pelcotec LMS-20GT (batch level certificate provided)
  • Individually certified version is Pelcotec LMS-20GC (individual certificate included)

 

Download Technical Note
Order

Art.Description Unit PriceQuantity
688-2

Pelcotec™ LMS-20GT, Magnification Calibration standard, Transmitted Light, Traceable, in 3″x 1″ metal slide

Each € 397,30
✓
spinner
688-22

Pelcotec™ LMS-20GC, Magnification Calibration standard, Transmitted Light, Certified, in 3″x 1″ metal slide

Each € 1.002,50
✓
spinner
Brand: Ted Pella

Product
Description
SEM Holders
Order
Product

Pelcotec LMS-20 Low Magnification Calibration Standard
The Pelcotec LMS-20 Calibration Standard has been specifically designed for precise low magnification calibration and specimen stage calibration.
no. 688-1 to 688-1S

Description

Pelcotec LMS-20 Low Magnification Calibration Standard

The Pelcotec LMS-20 Calibration Standard has been specifically designed for precise low magnification calibration and specimen stage calibration.

Useful for large area particle analysis, GSR analysis, low magnification SEM applications, and LM applications with reflected light.
Useful in the 5x to 1000x magnification range.

Specifications are:

  • Total calibration area is 20 x 10mm with crossed lines and 0.01mm divisions
  • 75nm Cr lines on ultra-flat silicon substrate
  • Cross hairs showed at every 0.1mm with larger cross hairs at 0.5 and 1mm over the complete area
  • Serial number etched on each Pelcotec LMS-20 calibration standard
  • NIST traceable version is Pelcotec LMS-20T (batch level certificate provided)
  • Individually fully certified version is Pelcotec LMS-20C (individual certificate included)
  • Si die size is 22 x 11mm with a thickness of 675 m +/- 10 m, <100> orientation
  • Boron doped silicon wafer with a resistivity of 5-10 Ohm/cm
  • Available unmounted or mounted on larger SEM specimen mounts

 

To avoid contamination of test and calibration samples, we recommend storing these under vacuum. For the SEM pin mount, the #16179 PELCO SEM Sample Stub Vacuum Desiccator would be ideal.

Also available for transmitted light microscopy as LMS-20G

Sample Certificate of Traceability

688-1 LMS-20T Sample Certificate of Traceability

SEM Holders

SEM Holders

Type Prod. No. Data (D=Head dia.; P=Pin dia.; PL=Pin (length)
A 16111 pin mount dim Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
B 16261 pin mount Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY
C 16221 10mm cylinder 9.5mm dia. x 9.5mm Cylinder, JEOL
D 16281 15mm cylinder 15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON
E 16291 cylinder mount 15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON
F 16111-9 Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS
G You Supply Mount or Mount of Your Choice, not listed here (contact customer service)
K 16324 specimen mount 15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
L 16327 specimen mount 25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
M 16231 12.5mm mount 12.2mm dia. x 10mm Cylinder, JEOL
O 16115 31.7mm dia. x 6.47mm, Cambridge S4 Mount
P 16242 12.7mm mount Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head
Q 16153 25 x 10mm cylinder mount 25mm dia. x 10mm Cylinder, JEOL
R 16144 25.4 x 10mm cylinder mount Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
Order

Art.Description Unit PriceQuantity
688-1

Pelcotec™ LMS-20T, Low-Mag Calibration Standard, Traceable, Unmounted

Each € 226,50
✓
spinner
688-1G

Pelcotec™ LMS-20T, Low-Mag Calibration Standard, Traceable, Mount G, you supply mount

Each p.o.r.
688-1L

Pelcotec™ LMS-20T, Low-Mag Calibration Standard, Traceable, Mount L

Each € 241,20
✓
spinner
688-1O

Pelcotec™ LMS-20T, Low-Mag Calibration Standard, Traceable, Mount O

Each € 241,20
✓
spinner
688-1Q

Pelcotec™ LMS-20T, Low-Mag Calibration Standard, Traceable, Mount Q

Each € 241,20
✓
spinner
688-1R

Pelcotec™ LMS-20T, Low-Mag Calibration Standard, Traceable, Mount R

Each € 241,20
✓
spinner
688-1S

Pelcotec™ LMS-20T, Low-Mag Calibration Standard, Traceable, Mounted on 25x75mm slide

Each € 241,20
✓
spinner
Brand: Ted Pella

Product
Description
SEM Holders
Order
Product

Pelcotec LMS-20C, Low Magnification Calibration Standard, Certified
The Pelcotec LMS-20 Calibration Standard has been specifically designed for precise low magnification calibration and specimen stage calibration.
no. 688-11 to 688-11S

Description

Pelcotec LMS-20 Low Magnification Calibration Standard

The Pelcotec LMS-20 Calibration Standard has been specifically designed for precise low magnification calibration and specimen stage calibration.

Useful for large area particle analysis, GSR analysis, low magnification SEM applications, and LM applications with reflected light.
Useful in the 5x to 1000x magnification range.

Specifications are:

  • Total calibration area is 20 x 10mm with crossed lines and 0.01mm divisions
  • 75nm Cr lines on ultra-flat silicon substrate
  • Cross hairs showed at every 0.1mm with larger cross hairs at 0.5 and 1mm over the complete area
  • Serial number etched on each Pelcotec LMS-20 calibration standard
  • NIST traceable version is Pelcotec LMS-20T (batch level certificate provided)
  • Individually fully certified version is Pelcotec LMS-20C (individual certificate included)
  • Si die size is 22 x 11mm with a thickness of 675 m +/- 10 m, <100> orientation
  • Boron doped silicon wafer with a resistivity of 5-10 Ohm/cm
  • Available unmounted or mounted on larger SEM specimen mounts

To avoid contamination of test and calibration samples, we recommend storing these under vacuum. For the SEM pin mount, the #16179 PELCO SEM Sample Stub Vacuum Desiccator would be ideal.

Also available for transmitted light microscopy as LMS-20G

Sample Certificate of Traceability

688-11 LMS-20C Sample Certificate

 

SEM Holders

SEM Holders

Type Prod. No. Data (D=Head dia.; P=Pin dia.; PL=Pin (length)
A 16111 pin mount dim Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
B 16261 pin mount Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY
C 16221 10mm cylinder 9.5mm dia. x 9.5mm Cylinder, JEOL
D 16281 15mm cylinder 15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON
E 16291 cylinder mount 15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON
F 16111-9 Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS
G You Supply Mount or Mount of Your Choice, not listed here (contact customer service)
K 16324 specimen mount 15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
L 16327 specimen mount 25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
M 16231 12.5mm mount 12.2mm dia. x 10mm Cylinder, JEOL
O 16115 31.7mm dia. x 6.47mm, Cambridge S4 Mount
P 16242 12.7mm mount Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head
Q 16153 25 x 10mm cylinder mount 25mm dia. x 10mm Cylinder, JEOL
R 16144 25.4 x 10mm cylinder mount Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
Order

Art.Description Unit PriceQuantity
688-11

Pelcotec™ LMS-20C, Low-Mag Calibration Standard, Certified Unmounted

Each € 829,90
✓
spinner
688-11G

Pelcotec™ LMS-20C, Low-Mag Calibration Standard, Certified, Mount G, you supply mount

Each p.o.r.
688-11L

Pelcotec™ LMS-20C, Low-Mag Calibration Standard, Certified, Mount L

Each € 856,60
✓
spinner
688-11O

Pelcotec™ LMS-20C, Low-Mag Calibration Standard, Certified, Mount O

Each € 856,60
✓
spinner
688-11Q

Pelcotec™ LMS-20C, Low-Mag Calibration Standard, Certified, Mount Q

Each € 856,60
✓
spinner
688-11R

Pelcotec™ LMS-20C, Low-Mag Calibration Standard, Certified, Mount R

Each € 856,60
✓
spinner
688-11S

Pelcotec™ LMS-20C, Low-Mag Calibration Standard, Certified, Mounted on 25x75mm slide

Each € 856,60
✓
spinner
Brand: Ted Pella

Product
Description
SEM Holders
Order
Product

Pelcotec G-1 Silicon Calibration Specimen – 1 m Pitch
The Pelcotec G-1 calibration specimen with a 1 m pitch grid is very useful for magnification calibration or image distortion check in the 100x to 10,000x magnification range.
no. 633-1 to 633-1S

Description

Pelcotec G-1 Silicon Calibration Specimen – 1 m Pitch

Includes 1 m, 10 m and 100 m pitch

The Pelcotec G-1 calibration specimen with a 1 m pitch grid is very useful for magnification calibration or image distortion check in the 100x to 10,000x magnification range.
Can be used for SEM, Auger, Sims, FIB, and LM (reflected light).
Specimen may also be mounted directly on the Pelcotec G-1 which will give an accurate internal calibration in the image.

Particularly useful when working with powders.
Possible alternative for the SIRA calbration specimen (0.462 m pitch) which is no longer available.

The Pelcotec G-1 has the following specifications:

  • Total calibration area is 3x3mm with a 1 m pitch grid
  • Lines at 10um and 100um are thicker for easy orientation
  • Includes 1 m, 10 m and 100 m pitch
  • 300nm +/- 30nm deep line etched in ultraflat Si
  • Line width is 200nm at 1 m, 300nm at 10 m and 400nm at 100 m pitch lines
  • Precision is 1 m +/- 0.025 m with a perpendicularity better than 0.01
  • Serial number etched on each Pelcotec G-1 calibration standard
  • NIST traceable version is Pelcotec G-1T
  • Individually fully certified version is Pelcotec G-1C
  • Si die size is 4x4mm with a thickness of 525 m +/-20 m, <100> orientation
  • Boron doped silicon wafer with a resistivity of 5-10 Ohm/cm
  • Available unmounted or mounted on SEM specimen mounts

To avoid contamination of test and calibration samples, we recommend storing these under vacuum.

 

SEM Image Shows 1 m Pitch 10 m Pitch Lines 1 m Pitch Lines
Download 633-1 Sample Certificate of Traceability
SEM Holders

SEM Holders

Type Prod. No. Data (D=Head dia.; P=Pin dia.; PL=Pin (length)
A 16111 pin mount dim Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
B 16261 pin mount Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY
C 16221 10mm cylinder 9.5mm dia. x 9.5mm Cylinder, JEOL
D 16281 15mm cylinder 15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON
E 16291 cylinder mount 15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON
F 16111-9 Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS
G You Supply Mount or Mount of Your Choice, not listed here (contact customer service)
K 16324 specimen mount 15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
L 16327 specimen mount 25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
M 16231 12.5mm mount 12.2mm dia. x 10mm Cylinder, JEOL
O 16115 31.7mm dia. x 6.47mm, Cambridge S4 Mount
P 16242 12.7mm mount Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head
Q 16153 25 x 10mm cylinder mount 25mm dia. x 10mm Cylinder, JEOL
R 16144 25.4 x 10mm cylinder mount Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
Order

Art.Description Unit PriceQuantity
633-1

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Unmounted

Each € 136,40
✓
spinner
633-1A

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount A

Each € 152,40
✓
spinner
633-1B

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount B

Each € 152,40
✓
spinner
633-1C

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount C

Each € 152,40
✓
spinner
633-1D

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount D

Each € 152,40
✓
spinner
633-1E

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount E

Each € 152,40
✓
spinner
633-1F

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount F

Each € 152,40
✓
spinner
633-1G

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount G, you supply mount

Each p.o.r.
633-1K

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount K

Each € 152,40
✓
spinner
633-1L

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount L

Each € 152,40
✓
spinner
633-1M

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount M

Each € 152,40
✓
spinner
633-1O

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount O

Each € 152,40
✓
spinner
633-1P

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount P

Each € 152,40
✓
spinner
633-1Q

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount Q

Each € 152,40
✓
spinner
633-1R

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mount R

Each € 152,40
✓
spinner
633-1S

Pelcotec™ G-1T, 1 m Grid Calibration Standard, Traceable, Mounted on 25x75mm slide

Each € 152,40
✓
spinner
Brand: Ted Pella

Product
Description
SEM Holders
Order
Product

Pelcotec G-1 Silicon Calibration Specimen – 1 µm Pitch, Certified
The Pelcotec G-1 calibration specimen with a 1 µm pitch grid is very useful for magnification calibration or image distortion check in the 100x to 10,000x magnification range.
no. 633-11 to 633-11S

Description

Pelcotec G-1 Silicon Calibration Specimen – 1 µm Pitch

Includes 1 m, 10 µm and 100 µm pitch

The Pelcotec G-1 calibration specimen with a 1 m pitch grid is very useful for magnification calibration or image distortion check in the 100x to 10,000x magnification range.
Can be used for SEM, Auger, Sims, FIB, and LM (reflected light).
Specimen may also be mounted directly on the Pelcotec G-1 which will give an accurate internal calibration in the image.

Particularly useful when working with powders.
Possible alternative for the SIRA calbration specimen (0.462 µm pitch) which is no longer available.

The Pelcotec G-1 has the following specifications:

  • Total calibration area is 3x3mm with a 1 µm pitch grid
  • Lines at 10um and 100um are thicker for easy orientation
  • Includes 1 µm, 10 µm and 100 µm pitch
  • 300nm +/- 30nm deep line etched in ultraflat Si
  • Line width is 200nm at 1 m, 300nm at 10 m and 400nm at 100 m pitch lines
  • Precision is 1 m +/- 0.025 m with a perpendicularity better than 0.01
  • Serial number etched on each Pelcotec G-1 calibration standard
  • NIST traceable version is Pelcotec G-1T
  • Individually fully certified version is Pelcotec G-1C
  • Si die size is 4x4mm with a thickness of 525 m +/-20 m, <100> orientation
  • Boron doped silicon wafer with a resistivity of 5-10 Ohm/cm
  • Available unmounted or mounted on SEM specimen mounts

To avoid contamination of test and calibration samples, we recommend storing these under vacuum.

 

SEM Image Shows 1 m Pitch 10 m Pitch Lines 1 m Pitch Lines
Download 633-11 Sample Certificate of Calibration
SEM Holders

SEM Holders

Type Prod. No. Data (D=Head dia.; P=Pin dia.; PL=Pin (length)
A 16111 pin mount dim Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
B 16261 pin mount Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY
C 16221 10mm cylinder 9.5mm dia. x 9.5mm Cylinder, JEOL
D 16281 15mm cylinder 15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON
E 16291 cylinder mount 15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON
F 16111-9 Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS
G You Supply Mount or Mount of Your Choice, not listed here (contact customer service)
K 16324 specimen mount 15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
L 16327 specimen mount 25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
M 16231 12.5mm mount 12.2mm dia. x 10mm Cylinder, JEOL
O 16115 31.7mm dia. x 6.47mm, Cambridge S4 Mount
P 16242 12.7mm mount Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head
Q 16153 25 x 10mm cylinder mount 25mm dia. x 10mm Cylinder, JEOL
R 16144 25.4 x 10mm cylinder mount Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
Order

Art.Description Unit PriceQuantity
633-11

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Unmounted

Each € 744,00
✓
spinner
633-11A

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount A

Each € 739,10
✓
spinner
633-11B

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount B

Each € 739,10
✓
spinner
633-11C

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount C

Each € 739,10
✓
spinner
633-11D

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount D

Each € 739,10
✓
spinner
633-11E

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount E

Each € 739,10
✓
spinner
633-11F

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount F

Each € 739,10
✓
spinner
633-11G

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount G, you supply mount

Each p.o.r.
633-11K

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount K

Each € 739,10
✓
spinner
633-11L

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount L

Each € 739,10
✓
spinner
633-11M

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount M

Each € 739,10
✓
spinner
633-11O

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount O

Each € 739,10
✓
spinner
633-11P

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount P

Each € 739,10
✓
spinner
633-11Q

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount Q

Each € 739,10
✓
spinner
633-11R

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mount R

Each € 739,10
✓
spinner
633-11S

Pelcotec™ G-1C, 1 m Grid Calibration Standard, Certified, Mounted on 25x75mm slide

Each € 739,10
✓
spinner
Brand: Ted Pella

Product
Description
SEM Holders
Order
Product

Planotec Silicon Calibration Specimen – 10 m Pitch
Useful for magnification calibration or image distortion check in SEM and LM.
no. 615 to 615-5

Description

Planotec Silicon Calibration Specimen – 10 m Pitch

Useful for magnification calibration or image distortion check in SEM and LM.

Single crystal silicon, 5mm x 5mm.
The squares repeat every 10 m (0.01mm).
The dividing lines are about 1.9 m wide, formed by electron beam lithography.

A broader marking line is written every 500 m (0.5mm) which is useful for light microscopy.
Lines are etched, and approximately 300nm deep.
Available unmounted or mounted on SEM specimen mounts.

A certificate of calibration can be supplied for the Silicon Test Specimen at extra cost.

Many types of samples can be mounted directly onto the Silicon Test Specimen so that an internal calibration is obtained in the image.

  • Thickness: 675 m
  • Si crystal orientation: <100>
  • Wafer type: P-type/boron doped
  • Resistance: 1-30 Ohm/cm

To avoid contamination of test and calibration samples, we recommend storing these under vacuum.

SEM Holders

SEM Holders

Type Prod. No. Data (D=Head dia.; P=Pin dia.; PL=Pin (length)
A 16111 pin mount dim Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
B 16261 pin mount Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY
C 16221 10mm cylinder 9.5mm dia. x 9.5mm Cylinder, JEOL
D 16281 15mm cylinder 15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON
E 16291 cylinder mount 15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON
F 16111-9 Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS
G You Supply Mount or Mount of Your Choice, not listed here (contact customer service)
K 16324 specimen mount 15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
L 16327 specimen mount 25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
M 16231 12.5mm mount 12.2mm dia. x 10mm Cylinder, JEOL
O 16115 31.7mm dia. x 6.47mm, Cambridge S4 Mount
P 16242 12.7mm mount Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head
Q 16153 25 x 10mm cylinder mount 25mm dia. x 10mm Cylinder, JEOL
R 16144 25.4 x 10mm cylinder mount Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
Order

Art.Description Unit PriceQuantity
615

Planotec Silicon Test Specimen, Unmounted

Each € 110,10
✓
spinner
615-A

Planotec Silicon Test Specimen, Mount A

Each € 136,90
✓
spinner
615-B

Planotec Silicon Test Specimen, Mount B

Each € 136,90
✓
spinner
615-C

Planotec Silicon Test Specimen, Mount C

Each € 136,90
✓
spinner
615-D

Planotec Silicon Test Specimen, Mount D

Each € 136,90
✓
spinner
615-E

Planotec Silicon Test Specimen, Mount E

Each € 136,90
✓
spinner
615-F

Planotec Silicon Test Specimen, Mount F

Each € 136,90
✓
spinner
615-G

Planotec Silicon Test Specimen, Mount G, you supply mount

Each p.o.r.
615-K

Planotec Silicon Test Specimen, Mount K

Each € 136,90
✓
spinner
615-L

Planotec Silicon Test Specimen, Mount L

Each € 136,90
✓
spinner
615-M

Planotec Silicon Test Specimen, Mount M

Each € 136,90
✓
spinner
615-O

Planotec Silicon Test Specimen, Mount O

Each € 136,90
✓
spinner
615-P

Planotec Silicon Test Specimen, Mount P

Each € 136,90
✓
spinner
615-Q

Planotec Silicon Test Specimen, Mount Q

Each € 136,90
✓
spinner
615-R

Planotec SiliconTest Specimen, Mount R

Each € 138,30
✓
spinner
615-5

Planotec Test Specimen for incident light microscopy, Mounted on a blackened glass slide

Each € 564,60
✓
spinner
Brand: Ted Pella

Product
Description
SEM Holders
Order
Product

Planotec Silicon Calibration Specimen – 10 m Pitch, Certified
Useful for magnification calibration or image distortion check in SEM and LM.
no. 660-615-A to 660-615-5

Description

Planotec Silicon Calibration Specimen – 10 m Pitch

Useful for magnification calibration or image distortion check in SEM and LM.

Single crystal silicon, 5mm x 5mm.
The squares repeat every 10 m (0.01mm).
The dividing lines are about 1.9 m wide, formed by electron beam lithography.

A broader marking line is written every 500 m (0.5mm) which is useful for light microscopy.
Lines are etched, and approximately 300nm deep.
Available unmounted or mounted on SEM specimen mounts.

A certificate of calibration can be supplied for the Silicon Test Specimen at extra cost.

Many types of samples can be mounted directly onto the Silicon Test Specimen so that an internal calibration is obtained in the image.

  • Thickness: 675 m
  • Si crystal orientation: <100>
  • Wafer type: P-type/boron doped
  • Resistance: 1-30 Ohm/cm

To avoid contamination of test and calibration samples, we recommend storing these under vacuum.

Download Sample Certification for Planotec Test Specimen
SEM Holders

SEM Holders

Type Prod. No. Data (D=Head dia.; P=Pin dia.; PL=Pin (length)
A 16111 pin mount dim Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
B 16261 pin mount Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY
C 16221 10mm cylinder 9.5mm dia. x 9.5mm Cylinder, JEOL
D 16281 15mm cylinder 15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON
E 16291 cylinder mount 15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON
F 16111-9 Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS
G You Supply Mount or Mount of Your Choice, not listed here (contact customer service)
K 16324 specimen mount 15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
L 16327 specimen mount 25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
M 16231 12.5mm mount 12.2mm dia. x 10mm Cylinder, JEOL
O 16115 31.7mm dia. x 6.47mm, Cambridge S4 Mount
P 16242 12.7mm mount Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head
Q 16153 25 x 10mm cylinder mount 25mm dia. x 10mm Cylinder, JEOL
R 16144 25.4 x 10mm cylinder mount Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
Order

Art.Description Unit PriceQuantity
660-615-A

Planotec Silicon Test Specimen, Certified, Mount A

Each € 1.086,60
✓
spinner
660-615-B

Planotec SiliconTest Specimen, Certified, Mount B

Each € 1.024,80
✓
spinner
660-615-C

Planotec Silicon Test Specimen, Certified, Mount C

Each € 1.024,80
✓
spinner
660-615-D

Planotec Silicon Test Specimen, Certified, Mount D

Each € 2.212,30
✓
spinner
660-615-E

Planotec Silicon Test Specimen, Certified, Mount E

Each € 1.024,80
✓
spinner
660-615-F

Planotec Silicon Test Specimen, Certified, Mount F

Each € 952,30
✓
spinner
660-615-G

Planotec Silicon Test Specimen, Certified, Mount G, you supply mount

Each € 1.155,70
✓
spinner
660-615-K

Planotec Silicon Test Specimen, Certified, Mount K

Each € 1.004,30
✓
spinner
660-615-L

Planotec Silicon Test Specimen, Certified, Mount L

Each € 1.684,50
✓
spinner
660-615-M

Planotec Silicon Test Specimen, Certified, Mount M

Each € 1.031,00
✓
spinner
660-615-O

Planotec Silicon Test Specimen, Certified, Mount O

Each € 1.031,00
✓
spinner
660-615-P

Planotec Silicon Test Specimen, Certified, Mount P

Each € 1.031,00
✓
spinner
660-615-Q

Planotec Silicon Test Specimen, Certified, Mount Q

Each € 986,60
✓
spinner
660-615-R

Planotec Silicon Test Specimen, Certified, Mount R

Each € 1.031,00
✓
spinner
660-615-5

Planotec Test Specimen for incident light microscopy, Certified, Mounted on a blackened glass slide

Each € 1.105,10
✓
spinner
Brand: Ted Pella

Product
Description
Order
Product

Low Magnification Calibration Ruler
100 markings, divisions 0.01mm on disc
no. 630 to 630-R

Description

Low Magnification Calibration Ruler

100 markings, divisions 0.01mm on disc

Calibration ruler on 1/8″ (3.2mm) nickel-plated copper disc. 1mm long scale with 100 markings, with 0.01mm divisions with an accuracy of +/- 0.0005mm or better.

Available unmounted, or mounted on SEM mounts.

Order

Art.Description Unit PriceQuantity
630

Lo-mag Calibration Disc, Unmounted

Each € 139,50
✓
spinner
630-A

Lo-mag Calibration Disc, Mount A

Each € 152,40
✓
spinner
630-B

Lo-mag Calibration Disc, Mount B

Each € 152,40
✓
spinner
630-C

Lo-mag Calibration Disc, Mount C

Each € 152,40
✓
spinner
630-D

Lo-mag Calibration Disc, Mount D

Each € 152,40
✓
spinner
630-E

Lo-mag Calibration Disc, Mount E

Each € 152,40
✓
spinner
630-F

Lo-mag Calibration Disc, Mount F

Each € 152,40
✓
spinner
630-G

Lo-mag Calibration Disc, Mount G, You Supply Mount

Each p.o.r.
630-K

Lo-mag Calibration Disc, Mount K

Each € 152,40
✓
spinner
630-L

Lo-mag Calibration Disc, Mount L

Each € 152,40
✓
spinner
630-M

Lo-mag Calibration Disc, Mount M

Each € 152,40
✓
spinner
630-O

Lo-mag Calibration Disc, Mount O

Each € 152,40
✓
spinner
630-P

Lo-mag Calibration Disc, Mount P

Each € 152,40
✓
spinner
630-Q

Lo-mag Calibration Disc, Mount Q

Each € 152,40
✓
spinner
630-R

Lo-mag Calibration Disc, Mount R

Each € 152,40
✓
spinner
Brand: Ted Pella

Product
Description
SEM Holders
Order
Product

500nm SEM Cross Line Grating Replica
500nm cross line grating carbon replica (waffle pattern) with Au/Pd shadowing.
no. 674 to 674-R

Description

500nm SEM Cross Line Grating Replica

500nm cross line grating carbon replica (waffle pattern) with Au/Pd shadowing.
Replica is mounted on a 400 mesh copper TEM grid with a diameter of 3mm.

This cross line replica has well-defined trench type grooves, which makes it easy to determine the 500nm pitch or the 2,000 lines per millimeter.

Available as unmounted standard or mounted on a SEM mount.

See our #253 Magnification Calibration slide-rule for quick assistance in obtaining magnification based on space counts of this product.

SEM Holders

SEM Holders

Type Prod. No. Data (D=Head dia.; P=Pin dia.; PL=Pin (length)
A 16111 pin mount dim Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
B 16261 pin mount Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY
C 16221 10mm cylinder 9.5mm dia. x 9.5mm Cylinder, JEOL
D 16281 15mm cylinder 15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON
E 16291 cylinder mount 15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON
F 16111-9 Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS
G You Supply Mount or Mount of Your Choice, not listed here (contact customer service)
K 16324 specimen mount 15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
L 16327 specimen mount 25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
M 16231 12.5mm mount 12.2mm dia. x 10mm Cylinder, JEOL
O 16115 31.7mm dia. x 6.47mm, Cambridge S4 Mount
P 16242 12.7mm mount Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head
Q 16153 25 x 10mm cylinder mount 25mm dia. x 10mm Cylinder, JEOL
R 16144 25.4 x 10mm cylinder mount Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
Order

Art.Description Unit PriceQuantity
674

SEM Grating Replica, 500nm, Unmounted

Each € 72,60
✓
spinner
674-A

SEM Grating Replica, 500nm, Mount A

Each € 81,40
✓
spinner
674-B

SEM Grating Replica, 500nm, Mount B

Each € 81,40
✓
spinner
674-C

SEM Grating Replica, 500nm, Mount C

Each € 81,40
✓
spinner
674-D

SEM Grating Replica, 500nm, Mount D

Each € 81,40
✓
spinner
674-E

SEM Grating Replica, 500nm, Mount E

Each € 81,40
✓
spinner
674-F

SEM Grating Replica, 500nm, Mount F

Each € 81,40
✓
spinner
674-G

SEM Grating Replica, 500nm, Mount G, You Supply Mount

Each p.o.r.
674-K

SEM Grating Replica, 500nm, Mount K

Each € 81,40
✓
spinner
674-L

SEM Grating Replica, 500nm, Mount L

Each € 81,40
✓
spinner
674-M

SEM Grating Replica, 500nm, Mount M

Each € 81,40
✓
spinner
674-O

SEM Grating Replica, 500nm, Mount O

Each € 81,40
✓
spinner
674-P

SEM Grating Replica, 500nm, Mount P

Each € 81,40
✓
spinner
674-Q

SEM Grating Replica, 500nm, Mount Q

Each € 81,40
✓
spinner
674-R

SEM Grating Replica, 500nm, Mount R

Each € 81,40
✓
spinner
Brand: Ted Pella

Product
Description
SEM Holders
Order
Product

Grating Replica, Waffle
Carbon replica with Au/Pd shadowing with 2,160 lines per millimeter.
no. 604 to 604-R

Description

Grating Replica, Waffle

(Crossed-Lines)

Carbon replica with Au/Pd shadowing with 2,160 lines per millimeter.
Replica is mounted on a 400 mesh copper TEM grid with a diameter of 3mm.

See our number 252 Magnification Calibration Slide-Rule for quick assistance in obtaining magnification based on space counts of this product.

SEM Holders

SEM Holders

Type Prod. No. Data (D=Head dia.; P=Pin dia.; PL=Pin (length)
A 16111 pin mount dim Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
B 16261 pin mount Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY
C 16221 10mm cylinder 9.5mm dia. x 9.5mm Cylinder, JEOL
D 16281 15mm cylinder 15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON
E 16291 cylinder mount 15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON
F 16111-9 Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS
G You Supply Mount or Mount of Your Choice, not listed here (contact customer service)
K 16324 specimen mount 15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
L 16327 specimen mount 25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight
M 16231 12.5mm mount 12.2mm dia. x 10mm Cylinder, JEOL
O 16115 31.7mm dia. x 6.47mm, Cambridge S4 Mount
P 16242 12.7mm mount Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head
Q 16153 25 x 10mm cylinder mount 25mm dia. x 10mm Cylinder, JEOL
R 16144 25.4 x 10mm cylinder mount Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom
Order

Art.Description Unit PriceQuantity
604

SEM Grating Replica, Unmounted

Each € 79,10
✓
spinner
604-A

SEM Grating Replica, Mount A

Each € 87,30
✓
spinner
604-B

SEM Grating Replica, Mount B

Each € 87,30
✓
spinner
604-C

SEM Grating Replica, Mount C

Each € 87,30
✓
spinner
604-D

SEM Grating Replica, Mount D

Each € 87,30
✓
spinner
604-E

SEM Grating Replica, Mount E

Each € 87,30
✓
spinner
604-F

SEM Grating Replica, Mount F

Each € 87,30
✓
spinner
604-G

SEM Grating Replica, Mount G, you supply mount

Each p.o.r.
604-K

SEM Grating Replica, Mount K

Each € 87,30
✓
spinner
604-L

SEM Grating Replica, Mount L

Each € 87,30
✓
spinner
604-M

SEM Grating Replica, Mount M

Each € 87,30
✓
spinner
604-O

SEM Grating Replica, Mount O

Each € 87,30
✓
spinner
604-P

SEM Grating Replica, Mount P

Each € 87,30
✓
spinner
604-Q

SEM Grating Replica, Mount Q

Each € 87,30
✓
spinner
604-R

SEM Grating Replica, Mount R

Each € 87,30
✓
spinner
Brand: Ted Pella

Product
Description
Order
Product

Fine Copper Mesh Grids in Folding Grids (unmounted)
For low magnification calibration of scanning electron microscopes.
no. 631-A

Description

Fine Copper Mesh Grids in Folding Grids (unmounted)

For low magnification calibration of scanning electron microscopes.
The fine mesh is held within a 3mm 100 mesh folding grid.

Available with 1000 mesh (25.4 m pitch).

Order

Art.Description Unit PriceQuantity
631-A

1000 mesh in 3mm 100 mesh Folding Grid

Each € 74,40
✓
spinner
Brand: Ted Pella

Contact

Van Loenen Instruments
Penningweg 69 E
1507 DE Zaandam

Tel :+31 75 614 90 40
E-mail  :info@loeneninstruments.com

BTW/VAT nr. :NL804 608 180 B01
KvK nr. :28038099

Sign up for our News Letter

Our partners

© 2025 Van Loenen Instruments