Products
X-Ray References Calibration
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
PELCO X-CHECKER®
Monitor Energy Dispersive Spectrometer/SEM Systems
The updated PELCO X-CHECKER® is a calibration aid to help you monitor the performance of your EDS X-ray system on an SEM.
The PELCO X-CHECKER® contains a series of standard materials on your choice of aluminum mount.
With PELCO X-CHECKER®, you can check your detector resolution and calibration, test for contamination on the detector window, monitor low-end sensitivity, and calibrate your image analysis software.
When was the last time you checked the performance of your EDS system
The #602-01 contains:
Manganese to measure full width at half max (FWHM) detector resolution
Aluminum and copper to check spectral calibration
Carbon to monitor calibration at the low end of the spectrum for thin window detectors.
Nickel TEM grid sizes, 40 x 40 m and 18 x 18 m, with 5% accuracy, are furnished for checking image analysis software calibration.
They also facilitate an easy test for monitoring the amount of vacuum pump oil contamination on the detector window
Instruction booklet and storage case included.
SEM Holders
Type A | Type B | Type C | Type D | ||||
![]() |
![]() |
![]() |
![]() |
||||
Art. no. 16111 | Art. no. 16261 | Art. no. 16221 | Art. no. 16281 | ||||
Type E | Type F | Type G | Type K | ||||
![]() |
![]() |
![]() |
![]() |
||||
Art. no. 16291 | Art. no. 16111-9 | Your Holder | Art. no. 16324 | ||||
Type L | Type M | Type O | Type P | ||||
![]() |
![]() |
![]() |
![]() |
||||
Art. no. 16327 | Art. no. 16231 | Art. no. 16115 | Art. no. 16242 | ||||
Type Q | Type R | ||||||
![]() |
![]() |
||||||
Art. no. 16153 | Art. no. 16144 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
602-01 | PELCO X-Checker: Mn, Cu, C, 400 and 1000 mesh Ni grids, Unmounted |
Each | € 733,40 | ||
602-01A | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, A-Mount |
Each | € 745,00 | ||
602-01B | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, B-Mount |
Each | € 745,00 | ||
602-01C | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, C-Mount |
Each | € 745,00 | ||
602-01D | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, D-Mount |
Each | € 745,00 | ||
602-01E | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, E-Mount |
Each | € 745,00 | ||
602-01F | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, F-Mount |
Each | € 745,00 | ||
602-01G | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, Customer Supplies Mount |
Each | € 745,00 | ||
602-01K | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, K-Mount |
Each | € 745,00 | ||
602-01L | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, L-Mount |
Each | € 745,00 | ||
602-01M | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, M-Mount |
Each | € 745,00 | ||
602-01O | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, O-Mount |
Each | € 745,00 | ||
602-01P | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, P-Mount |
Each | € 745,00 | ||
602-01Q | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, Q-Mount |
Each | € 745,00 | ||
602-01R | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, R-Mount |
Each | € 745,00 | ||
602-01AFM | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, AFM-Mount |
Each | € 745,00 | ||
602-01S | PELCO X-CHECKER: Mn, Cu, C, 400 and 1000 mesh Ni grids, S-Mount |
Each | € 745,00 |
PELCO X-CHECKER B
The addition of a boron nitride sample to the PELCO X-Checker B, #602-02 provides a more sensitive monitor of low end performance on thin window and windowless detectors.
Instruction booklet and storage case included.
SEM Holders
Type A | Type B | Type C | Type D | ||||
![]() |
![]() |
![]() |
![]() |
||||
Art. no. 16111 | Art. no. 16261 | Art. no. 16221 | Art. no. 16281 | ||||
Type E | Type F | Type G | Type K | ||||
![]() |
![]() |
![]() |
![]() |
||||
Art. no. 16291 | Art. no. 16111-9 | Your Holder | Art. no. 16324 | ||||
Type L | Type M | Type O | Type P | ||||
![]() |
![]() |
![]() |
![]() |
||||
Art. no. 16327 | Art. no. 16231 | Art. no. 16115 | Art. no. 16242 | ||||
Type Q | Type R | ||||||
![]() |
![]() |
||||||
Art. no. 16153 | Art. no. 16144 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
602-02 | PELCO X-Checker B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, Unmounted |
Each | € 827,10 | ||
602-02A | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, A-Mount |
Each | € 838,30 | ||
602-02B | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, B-Mount |
Each | € 838,30 | ||
602-02C | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, C-Mount |
Each | € 838,30 | ||
602-02D | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, D-Mount |
Each | € 838,30 | ||
602-02E | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, E-Mount |
Each | € 838,30 | ||
602-02F | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, F-Mount |
Each | € 838,30 | ||
602-02G | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, Customer Supplies Mount |
Each | € 944,60 | ||
602-02K | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, K-Mount |
Each | € 838,30 | ||
602-02L | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, L-Mount |
Each | € 838,30 | ||
602-02M | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, M-Mount |
Each | € 838,30 | ||
602-02O | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, O-Mount |
Each | € 838,30 | ||
602-02P | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, P-Mount |
Each | € 838,30 | ||
602-02Q | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, Q-Mount |
Each | € 838,30 | ||
602-02R | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, R-Mount |
Each | € 838,30 | ||
602-02AFM | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, AFM-Mount |
Each | € 838,30 | ||
602-02S | PELCO X-CHECKER B: Mn, Cu, Ni, C, and BN, 400 mesh Ni grid, S-Mount |
Each | € 838,30 |
PELCO X-CHECKER EXTRA
EDS performance monitor contains the same elements as the #602-03 plus a fluorine source, in the form of PTFE, to test resolution at the fluorine K-alpha peak (industry standard for measuring low end resolution).
A beryllium half grid is also added for ultimate test of low end detector performance.
Instruction booklet and storage case included.
SEM Holders
Type A | Type B | Type C | Type D | ||||
![]() |
![]() |
![]() |
![]() |
||||
Art. no. 16111 | Art. no. 16261 | Art. no. 16221 | Art. no. 16281 | ||||
Type E | Type F | Type G | Type K | ||||
![]() |
![]() |
![]() |
![]() |
||||
Art. no. 16291 | Art. no. 16111-9 | Your Holder | Art. no. 16324 | ||||
Type L | Type M | Type O | Type P | ||||
![]() |
![]() |
![]() |
![]() |
||||
Art. no. 16327 | Art. no. 16231 | Art. no. 16115 | Art. no. 16242 | ||||
Type Q | Type R | ||||||
![]() |
![]() |
||||||
Art. no. 16153 | Art. no. 16144 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
602-03 | PELCO X-Checker EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, Unmounted |
Each | € 945,20 | ||
602-03A | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, A-Mount |
Each | € 956,40 | ||
602-03B | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, B-Mount |
Each | € 956,40 | ||
602-03C | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, C-Mount |
Each | € 956,40 | ||
602-03D | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, D-Mount |
Each | € 956,40 | ||
602-03E | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, E-Mount |
Each | € 956,40 | ||
602-03F | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, F-Mount |
Each | € 956,40 | ||
602-03G | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, Customer Supplies Mount |
Each | € 1.062,80 | ||
602-03K | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, K-Mount |
Each | € 956,40 | ||
602-03L | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, L-Mount |
Each | € 956,40 | ||
602-03M | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, M-Mount |
Each | € 956,40 | ||
602-03O | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, O-Mount |
Each | € 956,40 | ||
602-03P | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, P-Mount |
Each | € 956,40 | ||
602-03Q | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, Q-Mount |
Each | € 956,40 | ||
602-03R | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, R-Mount |
Each | € 956,40 | ||
602-03AFM | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, AFM-Mount |
Each | € 956,40 | ||
602-03S | PELCO X-CHECKER EXTRA: Mn, Cu, C, BN, F, 400 mesh Ni grid and Be half grid, S-Mount |
Each | € 956,40 |
PELCO X-CHECKER Wafer
The PELCO X-Checker Wafer is available for systems set up for silicon wafer handling.
The PELCO X-Checker Wafer is available on standard 200mm (8″) and 300mm (12″) wafers, with eight standards for elemental and spatial calibrations.
The #602-20 and #602-21 contain:
- Copper disc to check spectral calibration
- Manganese 88%, nickel 12% alloy to measure full width at half max (FWHM) detector resolution
- Nickel 400 mesh TEM grid for imaging calibration
- PTFE as a fluorine source to measure low energy resolution
- Carbon to monitor calibration at the low end of the spectrum for thin window detectors
- Aluminum foil disc
- Boron nitride to test low energy performance/peak separation
- 304 stainless steel for checking quantificationInstruction booklet and clamshell wafer storage case included.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
602-20 | PELCO X-Checker Wafer, 200mm (8″) |
Each | € 2.126,70 | ||
602-21 | PELCO X-Checker Wafer, 200mm (12″) |
Each | € 2.658,30 |