Products
Plastic & Silicone Molds
Round Silicone Rubber Molds, Reusable, White
Reusable molds for cold embedding made from sturdy, yet flexible, white silicone.
Special formulation ensures easy removal without the use of release agents.
Smooth surface for easy identification of samples in clear resins: much smoother than rubber molds.
Does not deform and holds shape to produce round embedding over and over again.
Available in four sizes; 1″, 1-1/4″, 1-1/2″ and 2″ internal diameter.
All molds are 1″ high with 3/4″ internal depth.
Sold in packs of 10 for 1″, 1-1/4″ and 1-1/2″ and pack of 5 for 2″ diameter.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 813-172 | Round Silicone Rubber Mold, white, 1″ (25.4mm) dia. |
10 | € 104,20 | ||
| 813-174 | Round Silicone Rubber Mold, white, 1-1/4″ (31.75mm) dia. |
10 | € 103,80 | ||
| 813-176 | Round Silicone Rubber Mold, white, 1-1/2″ (38.1mm) dia. |
10 | € 115,90 | ||
| 813-177 | Round Silicone Rubber Mold, white, 2″ (50.8mm) dia. |
5 | € 115,90 |
Rectangular Silicone Rubber Molds, Reusable, White
Both sizes are 1″ high with 3/4″ internal depth.
Internal dimensions are 2 1/4 x 1″ and 3 x 2″.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 813-183 | Rectangular Silicone Rubber Mold, white, 2-1/4 x 1″ |
5 | € 263,90 | ||
| 813-184 | Rectangular Silicone Rubber Mold, white, 3 x 2″ |
Each | € 248,90 |
2-Part Plastic Molds
For making cold embeddings with epoxy.
Separate cap for easy removal.
Use mold release before pouring resin.
Sold in packs of 12 for 1″, 1-1/4″, and 1-1/2″.
| Product # | 813-165 | 813-167 | 813-169 |
|---|---|---|---|
| ID Top | 25,5mm | 31,8mm | 38mm |
| OD Top | 29mm | 35mm | 41mm |
| OD Base | 35mm | 39,6mm | 47,5mm |
| Height Overall | 33mm | 33mm | 33mm |
| Height Less Base | 30,7mm | 30,7mm | 30,7mm |
| Interior Depth | 28mm | 28mm | 28mm |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 813-165 | 2-Part Plastic Mold, 1″ |
12 | € 59,30 | ||
| 813-167 | 2-Part Plastic Mold, 1-1/4″ |
12 | € 60,20 | ||
| 813-169 | 2-Part Plastic Mold, 1-1/2″ |
12 | € 71,20 |
Protective Mount Caps
Rigid mount caps to protect metallographic or petrographic mounts with 1″, 1-1/4″, 1-1/2″or 2″ diameter.
Made of black polethylene.
Height approximately 1/2″ (12.7mm). Sold in packs of 25 for 1″, 1-1/4″, 1-1/2″ and in pack of 10 for 2″ diameter.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 813-225 | Protective Caps for 1″ mounts |
25 | € 8,20 | ||
| 813-232 | Protective Caps for 1-1/4″ mounts |
25 | € 11,00 | ||
| 813-238 | Protective Caps for 1-1/2″ mounts |
25 | € 15,40 | ||
| 813-250 | Protective Caps for 2″ mounts |
10 | € 12,90 |
