Products
Forensic Supplies
A complete line of high quality GSR field sampling kits, containing certified SEM pin stubs with double coated adhesive carbon tabs in plastic tubes.
The certified SEM pin stubs have very low amounts of Pb, Sb and Ba, not detectable by SEM/EDX.
The caps hold the GSR sample disc for easy and secure GSR collection.
The discs are ready to use and the tubes are pre-labeled for the sampling areas.
The sturdy transport box is tamper evident sealed.
 |
 |
 |
||
| 3-Disc GSR Field Kit. A control disc is added to the two sampling discs to enhance certainty of the analysis. Prod. No. 16256-3. |
4-Disc GSR Field Kit. Suitable for sampling palm and back separately on both hands. Prod. No. 16256-4. |
5-Disc GSR Field Kit. A control disc is added to the four disc sampling kit to make it compatible with FBI requirements. Prod. No. 16256-5. |
||
Normal area for taking samples on “subject” |
Each kit comes complete with:
|
|||
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16256-3 | 3 Disc Forensic Gunshot Residue Field Kit |
Each | € 50,60 | ||
| 16256-4 | 4 Disc Forensic Gunshot Residue Field Kit |
Each | € 26,30 | ||
| 16256-5 | 5 Disc Forensic Gunshot Residue Field Kit |
Each | € 27,40 |
Plastic Zipper Storage Bags
Selection of polyethylene plastic bags with a resealable zip lock.
The zipper bags are ideal for packing, storing, shipping, sampling and sorting.
The plain zipper storage bags are available in 11 practical sizes with a 4 mil thickness.
The write-on zipper storage bags come in 6 practical sizes, they have a white write-on area and a thickness of 2 mil.
These bags will hold up in a convection oven at temperatures of 90 C/195 F, remember that the air in the bag will expand during initial heating.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 139-110 | Plastic Zipper Bag, 2 x 3″ |
100 | € 7,30 | ||
| 139-101 | Plastic Zipper Bag, 2-1/2 x 3″ |
100 | € 7,90 | ||
| 139-102 | Plastic Zipper Bag, 3 x 4″ |
100 | € 10,20 | ||
| 139-104 | Plastic Zipper Bag, 4 x 4″ |
100 | € 11,90 | ||
| 139-105 | Plastic Zipper Bag, 4 x 6″ |
100 | € 18,60 | ||
| 139-107 | Plastic Zipper Bag, 5 x 8″ |
100 | € 16,70 | ||
| 139-111 | Plastic Zipper Bag, 6 x 6″ |
100 | € 20,10 | ||
| 139-108 | Plastic Zipper Bag, 6 x 9″ |
100 | € 21,30 | ||
| 139-112 | Plastic Zipper Bag, 8 x 8″ |
100 | € 31,00 | ||
| 139-109 | Plastic Zipper Bag, 9 x 12″ |
100 | € 34,50 | ||
| 139-113 | Plastic Zipper Bag, 10 x 12″ |
100 | € 48,90 |
Forensic Gunshot Residue Lab Kit
Ten 12.7mm SEM pin mounts in clean, glass storage tubes (25mm OD x 55mm high) held in a compact transport box with labels.
GSR Kit is designed to avoid any contamination of the GSR samples.
The Forensic Gunshot Residue Lab Kit is available with either standard 12.7mm pin mounts with 8mm pins (16111) or with the shorter 6mm pins (16111-9).
Also available as a lab kit without pin mounts and tabs.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16259 | Forensic Gunshot Residue Lab Kit: 10 each 12.7mm SEM Pin Mounts (8mm pin), with mounted carbon tabs (12mm; 0.47 dia.) in Glass Tubes with Caps, 12 blank labels |
Each | € 38,10 | ||
| 16259-9 | Forensic Gunshot Residue Lab Kit: 10 each 12.7mm SEM Short Pin Mounts (6mm pin for ZEISS/LEO), with mounted carbon tabs (12mm; 0.47 dia.) in Glass Tubes with Caps, 12 blank labels |
Each | € 42,50 | ||
| 16260 | Forensic Sample Kit: 10 Glass Sample Tubes with Caps, 12 blank labels |
Each | € 26,40 |
Digital, Carbon Fiber Caliper, Certified
Designed for the lab
Switch from inches to millimeters at the touch of a button.
Great for use in measuring scratch or damage sensitive materials.
Will not corrode when used on tissue or other wet materials.
This caliper will measure up to 6″ (152mm).
The graduated scale on the caliper body is for approximate reference only.
The exact measurement (accurate to 0.1mm/0.01″) is shown on the LCD display.
Zeroes at any point
Zero button instantly sets unit to zero when jaws are at any position.
This permits setting a Floating Zero or reference point to read greater than or less than results with a minus sign displayed without calculations.
Ergonomic design, precision calipers are ideal for measuring outside or inside diameter.
Easy to read, large digital display is 1/3″ (8.5mm) high.
Traceable to NIST for accuracy
No lubrication is ever required on the ultra-smooth slide bar. Runs on the supplied battery for 10,000 hours. Made of strong composite carbon fiber.
To assure accuracy an individually serial-numbered Certificate is provided from an ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
 |
Example of Calibration Certificate |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 54491 | Digital Carbon Fiber Calipers with certificate, 6″ (152mm) |
Each | € 90,40 |
| Chemographic test samples with synthetic GSR distributions These Chemographic test specimens have been developed for the optimisation and validation of chemographic methods for Shooting Distance Determination (SDD) forensic work along with other applications.They are suitable as sample material for inter-laboratory tests according to ISO-Guide 43-1 and 2 or DIN/ISO 5725, as they meet the DIN/ISO requirements for identical sample material.GSR pattern distributions containing lead (Pb), are printed on the surface of a textile sample using a special, patent-protected printing process. The applied distributions simulate typical GSR distributions from different shooting distances (synthetic GSR) or serve to control the applied dyeing/staining process (Homogeneity & Resolution Limit). They are suitable for chemographic staining of the lead (Pb) distribution with both the reagents sodium rhodizonate and with sodium sulphide. Two sets are available: Synthetic GSR distributions The ‘comparison shot series’ consists of 24 textile samples. The applied distributions simulate typical GSR pattern applications for distances of 20, 50, 100, 150, 200, 300, 400, 600, 800, 1000, 1500, and 2000mm. The set consists of 2 x 12 samples as illustrated and is particularly suitable for testing the quality of the staining process on actual samples or for validating the process.
Homogeneity & Resolution Sample This set consists of 24 textile samples; 18 homogeneity and 6 resolution. The prints are designed to assess the homogeneity or lateral resolution limit for chemographic staining of GSR pattern distributions (see illustration for the layout of the Homogeneity and Resolution sample). The textile samples are particularly suitable for checking and documenting the quality/reproducibility of the dyeing process used on a regular basis, eg. as required by ISO 17025.
Both sets are only partially suitable for direct dyeing of the lead (Pb) distribution on the fabric. |
 |
 |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| S1959 | Chemography test sample, synthetic GSR Paper Process |
Each | p.o.r. | ||
| S1959-1 | Chemography test sample,synthetic GSR Filter Paper Process |
Each | p.o.r. | ||
| S1959R | Chemography test sample Homogeneity & Resolution PhotoPaper |
Each | p.o.r. | ||
| S1959R-1 | Chemography test sample Homogeneity & Resolution FilterPaper |
Each | p.o.r. |
Forensic Field Sampler
A high purity certified 12.7mm SEM pin stub specimen mount (see 16253, below) with and without an adhesive carbon conductive tab, mounted into the plastic cap of a glass specimen vial (25mm OD x 55mm high).
The Forensic Field Sampler has been designed to collect forensic evidence with minimum interference and/or contamination coming from the sampler.
Comes in 3 versions: without adhesive carbon tab, with adhesive carbon tab ready to use, and covered carbon tab (plastic cover needs to be removed prior to use).
Available with standard 12.7mm SEM pin mount with 8mm pin or short 12.7mm SEM pin mount with 6mm pin (ZEISS/LEO)
Applications for SEM or light microscopy investigation:
- Gunshot residue (GSR)
- Fiber collection
- Particle sampling
- Glass fragments
- Paint chips
- Powder samples
- Ideally suited for SEM specimen preparation on the most commonly used SEM pin stub, facilitating easy carbon coating for SEM/EDX investigation.
The Forensic Field Sampler can be safely stored in the glass specimen vial and can be easily shipped since the cap holds the sampler stub in place.
Evidence material is held by the adhesive carbon tab.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16250 | Forensic Field Sampler without Adhesive Carbon Tab |
100 | € 220,40 | ||
| 16255 | Forensic Field Sampler with Adhesive Carbon Tab, ready to use |
100 | € 291,40 | ||
| 16255-C | Forensic Field Sampler with Adhesive Carbon Tab, and clear plastic cover |
100 | € 291,40 | ||
| 16250-9 | Forensic Field Sampler without Adhesive Carbon Tab, Short Pin |
100 | € 239,90 | ||
| 16255-9 | Forensic Field Sampler with Adhesive Carbon Tab, ready to use, Short Pin |
100 | € 311,00 | ||
| 16255-C-9 | Forensic Field Sampler with Adhesive Carbon Tab, and clear plastic cover, Short Pin |
100 | € 311,00 |
| CorrStub SEM specimen stubs for correlative microscopy
Analysis and characterisation of organic and non-organic samples can involve the collection of images and data using a variety of instruments and techniques and, in most cases, the use of a single analytical approach is unable to provide all of the answers required. Typically combinations of techniques such as SEM and light microscopy are used to determine complete characterisation. With this in mind Agar Scientific have developed the new CorrStub specimen stub incorporating a unique referencing feature allowing analysis of exactly the same point, on the same sample, easily and repeatedly over alternative instruments.
CorrStub is available as a standard 12.5mm dia specimen stub to fit LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN and ZEISS instruments. The stubs are available separately or can be individually pre-fitted with a high conductivity carbon Al core tab, or Leit tabs and mounted in either single storage tubes (AGG3626) or in lightweight boxes of 12 (AGG3103). The CorrStub can also be supplied laser etched with a unique serial number for sample identification. |
 |
 |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| G303-10 | CorrStub SEM Specimen Stubs with V-Notch |
Each | € 33,00 | ||
| G303-S-10 | CorrStub SEM Specimen Stubs with V-Notch – Serialised (Pk10 |
10 | € 55,30 | ||
| G303-T-10 | CorrStubs with V-Notch,with Tab & Tube |
10 | € 53,80 | ||
| G303-TS-10 | CorrStub with Al core carbon & Tube – Serialised |
10 | € 74,10 | ||
| G303-T-12 | CorrStub with Al tab in box |
12 | € 74,20 | ||
| G303-TS-12 | CorrStub w/Al tab – Serialised in box |
12 | € 94,30 | ||
| G303-LT-10 | CorrStub with Leit Carbon tab in tube |
10 | € 49,10 | ||
| G303-LTS-10 | CorrStub with Leit Carbon tab in tube – Serialised |
10 | € 69,50 | ||
| G303-LT-12 | CorrStub with Leit Carbon tab in plastic box |
12 | € 68,20 | ||
| G303-LTS-12 | CorrStub w/ Leit tab in plastic box -Serialised |
12 | € 94,50 |
| The simplicity of application and smooth, clean surfaces of PELCO Tabs Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting.
Both tab sides have a thick conductive adhesive (conductive inner tab is 35 m and the adhesive is 45 m on each side for a total thickness of 125 m [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. Many laboratories use these tabs for SEM in a large diversity of applications. Adhering of the tab to a mount or surface should be done slowly and carefully to maintain surface smoothness. Refrigeration will increase shelf life but a warm up period of one hour is then required before use. The PELCO Tabs consist of a carbon fiber mat impregnated with a conductive adhesive. The conductive adhesive is a carbon filled acrylic, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol, alcohols or our 3M Adhesive Remover 80924 which is solvent-free. Temperature maximum is 60 C (140 F). High purity carbon tabs may contain very small impurities of Al and Si; see EDX Spectra. |
 |
 |
|
| Representative EDX Spectrum for PELCO Tabs and Double Coated Carbon Conductive Tapes #16084-6, #16084-3, #16084-1, #16084-2, #16073, #16073-1, #16073-2, #16073-4, and #16073-3. | Representative EDX Spectrum for “Spectro Tabs” Brand #16084-4. |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| G3357A | Leit-C Tabs, Carbon Conductive Tabs, 6mm OD |
112 | € 57,50 | ||
| G3357 | Leit-C Tabs, Carbon Conductive Tabs, 9mm OD |
98 | € 15,10 | ||
| G3347 | PELCO Tabs™, Carbon Conductive Tabs, 12mm OD |
100 | € 15,30 | ||
| G334715 | Leit-C Tabs, Carbon Conductive Tabs, 15mm OD |
100 | € 38,60 | ||
| G3348 | Leit-C Tabs, Carbon Conductive Tabs, 25mm OD |
54 | € 26,00 | ||
| 16084-32 | PELCO Tabs, Carbon Conductive Tabs, 32mm OD |
36 | € 35,20 |
Numbered Gunshot Residue Sampler
Numbered, certified aluminum mount that has a double-coated adhesive carbon tab applied to hold sample in a clean, glass vial 25mm OD x 55mm high (1″ x 2.17″).
Packed in a box of 100.
Numbers can be chosen as 100 consecutive numbers between 0 and 9999 (greatest numbers).
Please inform customer service about the numbering sequence when ordering this product.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16251 | Numbered Gunshot Residue Sampler |
100 | € 579,30 |
Secure-Lock Tamper Resistant Labels
An inexpensive way to safeguard lab shipments, sealed documents or small containers.
An inexpensive way to safeguard lab shipments, sealed documents or small containers.
Once applied these economical, peel-and-stick labels cannot be removed in one piece!
Instead, they are formulated to break apart when stressed, giving clear evidence that tampering has occurred.
Transparent labels display the words TAMPER RESISTANT in bold red ink.
Ideal for use on boxes, bottles, shipping containers, parts envelopes, even file drawers.
Comes in a handy dispenser box. Size 16 x 63.5mm).
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16250-1 | Secure-Lock Tamper Resistant Labels, 16 x 63.5mm |
250 | € 32,30 |
Certified Aluminum Alloy Specimen Mount for Forensic Use
The forensic SEM specimen mount is made of a special certified aluminum alloy.
This certified mount does not contain elements which might interfere with the collected GSR evidence.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16253 | Certified Aluminum Alloy SEM Specimen Mounts for Forensic Use, 12.7mm with 8mm Pin |
500 | € 254,30 | ||
| 16253-9 | Certified Aluminum Alloy Specimen Mounts for Forensic Use, 12.7mm with 6mm Short Pin |
500 | € 306,40 |
Single Pin Mount Storage Tube and Mailer tube for SEM specimen pin mounts
Pin mounts with the standard 3.2mm (1/8″) pin diameter are protected and held securely in the base (cap) of the tube.
Can be used for pin mounts up to 18mm diameter.
Pin mounts are sold separately.
Inside dimension of clear tube: 21mm (0.83″), max sample height on stub is 20mm (0.79″).
Outside dimensions are 23mm (0.9″) with a height of 52mm (2.05″).
Clear tube is made of polystyrene, cap is made of low density polyethylene (LDPE).
Sold in packs of 10.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16630 | Single Mount Storage Tube and Mailer |
10 | € 7,40 |
“Spectro Tabs Brand”, Double Coated
Construction and thickness is similar to the PELCO Tabs Carbon Conductive Tabs above.
The EDX Analysis clearly shows a higher purity surface for those applications that require critical composition study; only minor impurities of Al and Si may be found.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16084-5 | Spectro Tabs, High Purity Conductive Carbon Tabs, 25mm O.D. |
63 | € 63,10 | ||
| 16084-4 | Spectro Tabs, High Purity Conductive Carbon Tabs, 12mm O.D. |
120 | € 62,40 |
Barrier Foil Ziplock Bags
Barrier bags are ideal for storage of materials sensitive to moisture and/or oxygen.
The inside dimensions measure 6 x 5.5″ with a zip lock and a tear notch above the zipper.
The material is a metal foil-covered 4mil polyethylene with a MVTR (moisture vapor transmission rate) that is 1,000 times better than a typical poly bag.
Bags are heat sealable and ziplock resealable.
Compatible with vacuum sealers.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 139-310 | Barrier Foil Ziplock Bags, 6 x 5.5″ ID |
100 | € 67,50 |
The PELCO Carbo-Probe CP tools are made of ESD safe PEEK (polyetheretherketone) reinforced with conducting carbon fibers.
They are wear resistant and the soft tips do not scratch delicate surfaces.
Ideal for positioning small specimens/parts/components. Also suited for forensic and microscopy sampling applications.
Three different types or a complete set. Available with a straight or curved point being flat on the opposite end or as a double spatula.
Temperature resistant up to 300 C
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 5097 | PELCO Carbo-Probe CP, (PEEK), Set of 3 (Straight, Curved, Spatula) in Plastic Pouch |
Each | € 47,30 | ||
| 5094 | PELCO Carbo-Probe CP, (PEEK), MPT-1R, Straight Point, 150mm |
Each | € 15,80 | ||
| 5095 | PELCO Carbo-Probe CP, (PEEK), MPT-2, Curved Point, 148mm L |
Each | € 15,80 | ||
| 5096 | PELCO Carbo-Probe CP, (PEEK), MPT-3, Double Spatula, 140mm |
Each | € 15,80 |
