Products
Vitrobot Consumables
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 47000-100 | Standard Vitrobot Filter Paper, 55/20mm, Grade 595 |
100 | € 64,20 |
Tweezers Assembly for Vitrobot Mark IV, III, II & I
Complete replacement tweezers assembly for the FEI Vitrobot Mark IV-I.
Include ultra fine points DUMONT #5 tweezers with clamping block mounted on dovetail.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 47000-500 | Replacement Tweezers Assembly for FEI Vitrobot Mark IV-I |
Each | € 814,70 |
Foam Cryo Dewars
Foam dewars provide a neat and handy alternative to heavier vessels or the commonly utilized styrofoam shipping containers.
The special foam material is chemically inert and mechanically durable enough to be exposed directly to liquid nitrogen, without leaking or degrading.
Patented design makes the foam vessel easier to handle and safer to use than a traditional low profile glass dewar. Because of its lower thermal mass, a foam vessel will cause less liquid nitrogen boiling when it is filled.
The foam surface will also accumulate less frost. As a result, less liquid nitrogen is consumed.
Available as 500ml, 800ml and 1400ml Cryo Cups featuring convenient protruding handle, a Tall (1800ml) vessel, and a Mini (130ml) vessel.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 81760-500 | Foam Cryo cup, Small (500ml) |
Each | € 129,10 | ||
| 81760-800 | Foam Cryo cup, Medium (800ml) |
Each | € 167,70 | ||
| 81760-1400 | Foam Cryo cup, Large (1400ml) |
Each | € 274,30 | ||
| 81760-1800 | Foam Cryo cup, Tall (1800ml) |
Each | € 282,00 | ||
| 81760-130 | Foam Cryo cup, Mini (130ml) |
Each | € 71,50 |
Cryo Grid Boxes for Cryo Systems & Cryo Applications
The Cryo Grid boxes are used for storing and transferring vitrified cryo-EM specimens prepared with cryo-devices like the FEI Vitrobot, Gatan CP3, Leica EM 6P, as well as other cryo vitrification systems.
There are two versions of these boxes, each with 4 storage positions.
The round one is the most widely used and is available in two colors and three versions: with clear lid, pin type lid, and without lid.
The round boxes can be used on the Gatan 626 and CT3500 cryo transfer systems and on the FEI Vitrobot and Gatan CP3.
The square Cryo TEM grid box includes a non-static rotatable lid and fits the Gatan CT3500 Cryo-Transfer Holder and Gatan CP3.
All boxes have a UNC 5/40 thread in the center.
On versions with clear lids, the lid is held in place with a stainless steel screw.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 160-40W | Cryo Grid Box, round, White, with lid |
Each | € 16,20 | ||
| 160-41W | Cryo Grid Box, round, White, base only |
Each | € 12,10 | ||
| 160-42W | Cryo Grid Box, round, White, with pin type lid |
Each | € 29,90 | ||
| 160-44 | Cryo Grid Box with lid, square for Gatan CT3500 |
Each | € 29,00 | ||
| 160-43 | Replacement Clear Lid for Prod. No. 160-40, 160-41 and 160-44 Cryo Grid Boxes |
Each | € 5,00 | ||
| 160-40 | Cryo Grid Box, round, Blue, with lid |
Each | € 16,20 | ||
| 160-41 | Cryo Grid Box, round, Blue, base only |
Each | € 12,10 | ||
| 160-42 | Cryo Grid Box, round, Blue, with pin type lid |
Each | € 29,90 | ||
| 160-47 | Pin Type Lid, round |
Each | € 20,20 |
Multicolor Cryo Grid Box Handling Rod
Now available in four different colors, the Handling Rod screws into the threaded center of #160-41 round cryo grid box for pick-up and storage applications.
Can be used to store the cryo grid box in liquid nitrogen.
Available in white, yellow, blue, and black.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 160-46 | Cryo Grid Box Handling Rod, White |
Each | € 32,30 | ||
| 160-46-4 | Cryo Grid Box Handling Rod, Yellow |
Each | € 32,30 | ||
| 160-46-6 | Cryo Grid Box Handling Rod, Blue |
Each | € 32,30 | ||
| 160-46-0 | Cryo Grid Box Handling Rod, Black |
Each | € 32,30 |
Gripper Tool for Cryo Grid Box
An ergonomic and efficient device to open the pin type lid (#160-47) of a cryo grid box (#160-42 and 160-42W).
Spring-loaded pin vise grips the pin type lid firmly and securely.
High quality aluminum body construction is good for working in liquid nitrogen.
Ribbed barrel design makes it easy to unscrew the lid.
This handy tool can also be used to carry the covered cryo grid box.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 160-48 | Gripper Tool for Cryo Grid Box Pin Type Lid |
Each | € 58,20 |
ryo-EM Marker Pen
Particularly suitable for writing on cryo-EM grid boxes and cryo storage vials, these markers feel and write like a pen.
There s no offensive smell, and the cap closes with a nice reassuring click.
The ink dries fast and is waterproof.
- Compatible with Lab-TAG Labels
- Temperature Range: -196 °C – +110 °C
- Available in four colors in packages of 5 or 10.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 161-10B | Cryo-EM Marker Pen, blue Blue |
10 | € 55,00 | ||
| 161-5B | Cryo-EM Marker Pen, blue Blue, pack of 5 |
5 | € 32,30 | ||
| 161-10R | Cryo-EM Marker Pen, red Red |
10 | € 55,00 | ||
| 161-5R | Cryo-EM Marker Pen, red Red |
5 | € 32,30 | ||
| 161-10G | Cryo-EM Marker Pen, green Green |
10 | € 55,00 | ||
| 161-5G | Cryo-EM Marker Pen, green Green |
5 | € 32,30 | ||
| 161-10BK | Cryo-EM Marker Pen, yellow Black |
10 | € 55,00 | ||
| 161-5BK | Cryo-EM Marker Pen, yellow Black |
5 | € 32,30 |
NitroTAG Barcode Labels for Liquid Nitrogen Storage
temperature range from -196 C to +110 C
- Ideal for cryotubes and cryovials
- For storage in liquid and vapor phase LN2 and liquid helium
- For use in laboratory freezers (-120 °C, -80 °C, -20 °C)
- Waterproof and weatherproof
- Extra-permanent cryo adhesive
- Label rolls available on 1″ and 3″ cores
Cryogenic labels suitable specifically for small diameter cryotubes and cryovials, cardboard freezer boxes, polypropylene cryo/freezer boxes, cell culture plates, plastic bags and other containers for storage in liquid and vapor phase liquid nitrogen (-196 C), liquid helium (-269 C) and laboratory freezers.
NitroTAG labels are made from strong thermoplastic film coated with an extra-permanent cryo adhesive, can be immersed in liquid nitrogen immediately after applying to item.
They do not require the use of additional tape or wrap-around.
NitroTAG products adhere to wet and moist surfaces, and withstand a range of extreme temperatures including multiple freeze-thaw cycles, transportation on dry-ice, and sterilization by Gamma irradiations (tested up to 50KGy).
They can also be used for outdoor applications such as labeling plants and flowers.
Resistant to spraying with ethanol, isopropanol and other alcohols, bleach, DMSO, detergents and other chemicals (testing recommended).
Labels are compatible with all major brands of thermal transfer barcode printers such as Zebra, Datamax O Neil, Sato, CAB, Intermec, Monarch/Paxar, CognitiveTPG, Printronix, Brady (selected models) and more.
Use RR-Class alcohol-proof resin ribbons.
FDA Compliance: FDA 21 CFR 175.105 for indirect food contact; RoHS compliant
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 28139 | Deep Freeze Labels for Thermal Transfer Printers, 19 x 19mm, 25,4mm Core, Roll |
2000 | € 50,10 | ||
| 28139-1 | Deep Freeze Labels for Thermal Transfer Printers, 19 x 19mm, 76,2mm Core, Roll |
2000 | € 213,90 | ||
| 28139-2 | Deep Freeze Labels for Thermal Transfer Printers, 22 x 15mm, 25,4mm Core, Roll |
3000 | € 61,50 | ||
| 28139-3 | Deep Freeze Labels for Thermal Transfer Printers, 22 x 15mm, 76,2mm Core, Roll |
6000 | € 170,80 | ||
| 28139-4 | Deep Freeze Labels for Thermal Transfer Printers, 21.84 x 19.1mm, 25,4mm Core, Roll |
4000 | € 66,20 | ||
| 28139-5 | Deep Freeze Labels for Thermal Transfer Printers, 21.84 x 19.1mm, 76,2mm Core Roll |
4000 | € 66,20 | ||
| 28139-6 | Deep Freeze Labels for Thermal Transfer Printers, 22.2 x 22.2mm, 25,4mm Core, Roll |
1000 | € 52,50 | ||
| 28139-7 | Deep Freeze Labels for Thermal Transfer Printers, 22.2 x 22.2mm, 76,2mm Core Roll |
1000 | € 109,10 |
MetaliTAG Cryogenic Labels for Metal Racks
temperature range from -196 °C to +100 °C
- Ideal for identification of metal racks, aluminum canisters, polycarbonate boxes, canes and cryogenic straws
- For use with long term storage in liquid and vapor phase LN2, liquid helium and laboratory freezers
- Glove friendly adhesive
- Resistant to continuous wiping and rubbing
- White labels
- Supplied in roll format on 1″ or 3″ cores for thermal transfer printers
Cryogenic thermal transfer labels remain strongly attached to various metal surfaces including aluminum, stainless steel, powder coated metal, painted metal, iron and more.
They can be applied on the top and sides of freezer racks to easily identify racks and their content without pulling them out from dewar.
Our MetaliTAG labels are compatible with all major brands of thermal transfer barcode printers such as Zebra, CAB, Datamax O Neil, SATO, Printronix, Citizen, Toshiba Tech, TSC, Intermec, Cognitive, Monarch, Brady (some models) and others.
They also accept writing with permanent markers such as Cryo-Marker.
The labels are resistant to standard ethylene oxide gas sterilization
Use XAR-Class (Xylene Resistant) resin ribbons.
FDA Compliance: FDA 21 CFR 175.105 for indirect food contact
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 28140 | Cryogenic Label for Metal Rack, for Thermal Transfer Printers, 19 x 19mm, 25,4mm Core, Roll |
2000 | € 141,00 | ||
| 28140-1 | Cryogenic Label for Metal Rack, for Thermal Transfer Printers, 19 x 19mm, 76,2mm Core, Roll |
2000 | € 141,00 | ||
| 28140-2 | Cryogenic Label for Metal Rack, for Thermal Transfer Printers, 22 x 15mm, 25,4mm Core, Roll |
3000 | € 84,70 | ||
| 28140-4 | Cryogenic Label for Metal Rack, for Thermal Transfer Printers, 21.84 x 19.1mm, 25,4mm Core, Roll |
4000 | € 168,60 | ||
| 28140-5 | Cryogenic Label for Metal Rack, for Thermal Transfer Printers, 21.84 x 19.1mm, 76,2mm Core, Roll |
4000 | € 168,60 | ||
| 28140-6 | Cryogenic Label for Metal Rack, for Thermal Transfer Printers, 22.2 x 22.2mm, 25,4mm Core, Roll |
1000 | € 155,50 | ||
| 28140-7 | Cryogenic Label for Metal Rack, for Thermal Transfer Printers, 22.2 x 22.2mm, 76,2mm Core, Roll |
1000 | € 244,70 |
Cryo EM round storage box, 4 hole, to fit FEI Vitrobot
4-hole Cryo-EM grid storage box. Round shape to fit FEI Vitrobot with brass screw and threaded insert.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| G3736 | 4-hole Cryo-EM storage box, Round shape to fit FEI Vitrobot |
Each | p.o.r. |
