Products
Ultrasonic Cleaners
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
Small Ultrasonic Cleaner G1780
0.6 liter
- Small, cost-efficient ultra sonic cleaner for samples and parts.
- Comes with removable, oval shape ABS plastic parts holder.
- Hinged cover lid.
- Electronic pushbutton timer with 3 minute auto shutoff.
- Separate off button. LED illuminated bath.
Capacity: | 0.6 liters (20 oz) |
Basket dimensions: | 150 x 85 x 55mm (5.9 x 3.3 x 2.2 ) |
Housing: | 210 x 130 x 140mm (8.3 x 5.1 x 5.5 ) |
Frequency: | 42,000 Hz |
Power: | 35W, 115V, 50/60Hz |
Weight: | 0.8 kg (1.8 lbs) |
Certication: | CE, ETL |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
17040 | Small Ultrasonic Cleaner, Model G1780, 115V |
Each | € 115,50 |
Small Ultrasonic Cleaner B-200
0.44 liters
Practical working shape for many items such as eyeglasses and other smaller applications.
Comes with small parts holder. Approximately 50 watts.
Capacity: | 0.44 liters (15 oz.) |
Housing: | 222 x 114 x 127mm (8.75 x 4.5 x 5″) (L x W x D) |
Stainless tank: | 165 x 89 x 56mm (6.5 x 3.5 x 2.25″) (L x W x D) |
Useable dimensions within working basket: | 15.9 x 8.3 x 42cm (6-1/4 x 3-1/4 x 1.65″) (L x W x D). |
Weight: | 1.3kg (3 lbs. |
Frequency: | 40Khz |
(UL, CSA, ISO 9001 certified)
Hint: If you run the cleaner for 1-2 minutes and allow degassing of the cleaning solution before inserting parts, quicker and more effective cleaning will occur.
Warm water increases efficiency.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
17108 | Ultrasonic Cleaner, Model B-200, 120 VAC |
Each | € 459,10 |
2 Litre Ultrasonic Cleaner
The Ultrasonic Cleaner removes dirt, grease, corrosion and can be used for cleaning electronic and small mechanical parts. Millions of tiny bubbles are created when ultrasonic sound is passed through liquid. These tiny bubbles combined with a huge pressure create incredible cleaning results.This method of cleaning is particularly suited for cleaning difficult items such as instruments, tools, clock parts, airbrushes, printer heads, motors and more.
Degas mode – This mode is to be used after a fluid change to rapidly remove air from the fluid so it can provide maximum cleaning effectiveness from the start of the cleaning cycle.
Delicate mode – The cleaner runs at half power which provides a less aggressive cleaning action for fragile/delicate items.
Full-power mode – A powerful deep clean that will clean heavily contaminated items.
Temperature and Timing mode – Allows the user to set both the fluid temperature and duration of the cleaning cycle. These parameters will change depending on the cleaning agent and item being cleaned.
Features
- Stainless steel tank and basket
- Heating temperature range: 30 – 80?C
- Comprehensive manual included
- 220-240Vac
- Cable included
- Basket included
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
B7267 | Ultrasonic Cleaner |
Each | p.o.r. |
3 Litre Ultrasonic Cleaner
The Ultrasonic Cleaner removes dirt, grease, corrosion and can be used for cleaning Electronic & Mechanical parts. Millions of tiny bubbles are created when ultrasonic sound is passed through liquid. These tiny bubbles combined with a huge pressure create incredible cleaning results.This method of cleaning is particularly suited for cleaning difficult items such as instruments, tools, clock parts, airbrushes, printer heads, motors and more.
Degas mode – This mode is to be used after a fluid change to rapidly remove air from the fluid so it can provide maximum cleaning effectiveness from the start of the cleaning cycle.
Delicate mode – The cleaner runs at half power which provides a less aggressive cleaning action for fragile/delicate items.
Full-power mode – A powerful deep clean that will clean heavily contaminated items.
Temperature and Timing mode – Allows the user to set both the fluid temperature and duration of the cleaning cycle. These parameters will change depending on the cleaning agent and item being cleaned.
Features
- Stainless steel tank, basket and lid
- Heating temperature range: 30 – 80 C
- Comprehensive manual included
- 220-240Vac
- Cable included
- Basket included
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
B7268 | Ultrasonic Cleaner |
Each | p.o.r. |
6 Litre Ultrasonic Cleaner
The Ultrasonic Cleaner removes dirt, grease, corrosion and can be used for cleaning Electronic & Mechanical parts. Millions of tiny bubbles are created when ultrasonic sound is passed through liquid. These tiny bubbles combined with a huge pressure create incredible cleaning results.This method of cleaning is particularly suited for cleaning difficult items such as instruments, tools, clock parts, airbrushes, printer heads, motors and more.
Degas mode – This mode is to be used after a fluid change to rapidly remove air from the fluid so it can provide maximum cleaning effectiveness from the start of the cleaning cycle.
Delicate mode – The cleaner runs at half power which provides a less aggressive cleaning action for fragile/delicate items.
Full-power mode – A powerful deep clean that will clean heavily contaminated items.
Temperature and Timing mode – Allows the user to set both the fluid temperature and duration of the cleaning cycle. These parameters will change depending on the cleaning agent and item being cleaned.
Features
- Tank, lid and housing made from stainless steel
- Comprehensive manual included
- 220-240Vac
- UK and EU plug cable included
- Basket included
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
B7269 | Ultrasonic Cleaner |
Each | € 661,10 |
9 Litre Ultrasonic Cleaner
The Ultrasonic Cleaner removes dirt, grease, corrosion and can be used for cleaning Electronic & Mechanical parts. Millions of tiny bubbles are created when ultrasonic sound is passed through liquid. These tiny bubbles combined with a huge pressure create incredible cleaning results.This method of cleaning is particularly suited for cleaning difficult items such as instruments, tools, clock parts, airbrushes, printer heads, motors and more.
Degas mode – This mode is to be used after a fluid change to rapidly remove air from the fluid so it can provide maximum cleaning effectiveness from the start of the cleaning cycle.
Delicate mode – The cleaner runs at half power which provides a less aggressive cleaning action for fragile/delicate items.
Full-power mode – A powerful deep clean that will clean heavily contaminated items.
Temperature and Timing mode – Allows the user to set both the fluid temperature and duration of the cleaning cycle. These parameters will change depending on the cleaning agent and item being cleaned.
Features
- Tank, lid and housing made from stainless steel
- Comprehensive manual included
- 220-240Vac
- UK and EU plug cable included
- Basket included
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
B7309 | Ultrasonic Cleaner |
Each | p.o.r. |
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.