Products
Gold on Carbon
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
SEM High Resolution, Gold on Carbon Test Specimens
Scanning electron microscope (SEM and Focused Ion Beam (FIB) system resolution is defined in terms of a combination of criteria: resolution and number of gray levels in the image. This is to ensure that the resolution has not been distorted by using too much contrast to maximize visibility of the edges.
High resolution images ideally show fine details together with a low noise and a good range of contrast levels. The widely used gold on carbon test specimens are excellent for SEM, FESEM and FIB resolution testing.
The gold particles, with superior feature details, generate high secondary and/or backscatter electron signals with excellent contrast against the carbon background.
Five different special resolution testing specimens are available with different gold particle sizes for different resolution levels.
Available unmounted or conveniently mounted on most common SEMs stubs.
Each specimen has a square grid pattern with large crystals in the center of each square and very fine crystals at the edges of each grid (as illustrated).
Thus, medium and high resolution gap tests are performed on the same specimen.
The larger crystals show facets which allow assessment of the gray level reproduction available at high resolution.
6mm dia. x 2mm.
SEM Holders
Type | Prod. No. | Data (D=Head dia.; P=Pin dia.; PL=Pin (length) | |
---|---|---|---|
A | 16111 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
B | 16261 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY |
C | 16221 | ![]() |
9.5mm dia. x 9.5mm Cylinder, JEOL |
D | 16281 | ![]() |
15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON |
E | 16291 | ![]() |
15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON |
F | 16111-9 | ![]() |
Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS |
G | You Supply Mount or Mount of Your Choice, not listed here (contact customer service) | ||
K | 16324 | ![]() |
15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
L | 16327 | ![]() |
25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
M | 16231 | ![]() |
12.2mm dia. x 10mm Cylinder, JEOL |
O | 16115 | ![]() |
31.7mm dia. x 6.47mm, Cambridge S4 Mount |
P | 16242 | ![]() |
Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head |
Q | 16153 | ![]() |
25mm dia. x 10mm Cylinder, JEOL |
R | 16144 | ![]() |
Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
617 | Resolution Gold on Carbon, Specimen 1, Unmounted |
Each | € 211,90 | ||
617-A | Resolution Gold on Carbon, Specimen 1, Mount A |
Each | € 224,90 | ||
617-B | Resolution Gold on Carbon, Specimen 1, Mount B |
Each | € 224,90 | ||
617-C | Resolution Gold on Carbon, Specimen 1, Mount C |
Each | € 224,90 | ||
617-D | Resolution Gold on Carbon, Specimen 1, Mount D |
Each | € 224,90 | ||
617-E | Resolution Gold on Carbon, Specimen 1, Mount E |
Each | € 224,90 | ||
617-F | Resolution Gold on Carbon, Specimen 1, F |
Each | € 224,90 | ||
617-G | Resolution Gold on Carbon, Specimen 1, You supply mount |
Each | p.o.r. | ||
617-K | Resolution Gold on Carbon, Specimen 1, Mount K |
Each | € 224,90 | ||
617-L | Resolution Gold on Carbon, Specimen 1, Mount L |
Each | € 224,90 | ||
617-M | Resolution Gold on Carbon, Specimen 1, Mount M |
Each | € 224,90 | ||
617-O | Resolution Gold on Carbon, Specimen 1, Mount O |
Each | € 224,90 | ||
617-Q | Resolution Gold on Carbon, Specimen 1, Mount Q |
Each | € 224,90 | ||
617-P | Resolution Gold on Carbon, Specimen 1, Mount P |
Each | € 224,90 | ||
617-R | Resolution Gold on Carbon, Specimen 1, Mount R |
Each | € 224,90 |
Particularly suited for assessing the image quality of high resolution SEMs, such as those fitted with a field emission source.
A magnification of at least x80,000 is required to clearly resolve the gold particles.
6mm dia. x 2mm.
SEM Holders
Type | Prod. No. | Data (D=Head dia.; P=Pin dia.; PL=Pin (length) | |
---|---|---|---|
A | 16111 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
B | 16261 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY |
C | 16221 | ![]() |
9.5mm dia. x 9.5mm Cylinder, JEOL |
D | 16281 | ![]() |
15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON |
E | 16291 | ![]() |
15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON |
F | 16111-9 | ![]() |
Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS |
G | You Supply Mount or Mount of Your Choice, not listed here (contact customer service) | ||
K | 16324 | ![]() |
15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
L | 16327 | ![]() |
25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
M | 16231 | ![]() |
12.2mm dia. x 10mm Cylinder, JEOL |
O | 16115 | ![]() |
31.7mm dia. x 6.47mm, Cambridge S4 Mount |
P | 16242 | ![]() |
Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head |
Q | 16153 | ![]() |
25mm dia. x 10mm Cylinder, JEOL |
R | 16144 | ![]() |
Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
617-2 | High Resolution Gold on Carbon Spec. 2, Unmounted |
Each | € 470,60 | ||
617-2A | High Resolution Gold on Carbon Spec. 2, Mount A |
Each | € 482,80 | ||
617-2B | High Resolution Gold on Carbon Spec. 2, Mount B |
Each | € 482,80 | ||
617-2C | High Resolution Gold on Carbon Spec. 2, Mount C |
Each | € 482,80 | ||
617-2D | High Resolution Gold on Carbon Spec. 2, Mount D |
Each | € 482,80 | ||
617-2E | High Resolution Gold on Carbon Spec. 2, Mount E |
Each | € 482,80 | ||
617-2F | High Resolution Gold on Carbon Spec. 2, Mount F |
Each | € 482,80 | ||
617-2G | High Resolution Gold on Carbon Spec. 2, You Supply Mount |
Each | p.o.r. | ||
617-2K | High Resolution Gold on Carbon Spec. 2, K |
Each | € 482,80 | ||
617-2L | High Resolution Gold on Carbon Spec. 2, L |
Each | € 482,80 | ||
617-2M | High Resolution Gold on Carbon Spec. 2, M |
Each | € 482,80 | ||
617-2O | High Resolution Gold on Carbon Spec. 2, O |
Each | € 482,80 | ||
617-2P | High Resolution Gold on Carbon Spec. 2, P |
Each | € 482,80 | ||
617-2Q | High Resolution Gold on Carbon Spec. 2, Q |
Each | € 482,80 | ||
617-2R | High Resolution Gold on Carbon Spec. 2, R |
Each | € 482,80 |
For ultra high resolution performance testing, this specimen has a smaller gold island particle size compared to the 617 specimen described previously.
Suitable for testing field emission SEM’s at instrument magnifications of x100,000 and above.
6mm dia. x 2mm.
SEM Holders
Type | Prod. No. | Data (D=Head dia.; P=Pin dia.; PL=Pin (length) | |
---|---|---|---|
A | 16111 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
B | 16261 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY |
C | 16221 | ![]() |
9.5mm dia. x 9.5mm Cylinder, JEOL |
D | 16281 | ![]() |
15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON |
E | 16291 | ![]() |
15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON |
F | 16111-9 | ![]() |
Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS |
G | You Supply Mount or Mount of Your Choice, not listed here (contact customer service) | ||
K | 16324 | ![]() |
15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
L | 16327 | ![]() |
25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
M | 16231 | ![]() |
12.2mm dia. x 10mm Cylinder, JEOL |
O | 16115 | ![]() |
31.7mm dia. x 6.47mm, Cambridge S4 Mount |
P | 16242 | ![]() |
Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head |
Q | 16153 | ![]() |
25mm dia. x 10mm Cylinder, JEOL |
R | 16144 | ![]() |
Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
617-3 | Ultra High Resolution Gold on Carbon Spec. 3, Unmounted |
Each | € 464,50 | ||
617-3A | Ultra High Resolution Gold on Carbon Spec. 3, Mount A |
Each | € 476,70 | ||
617-3B | Ultra High Resolution Gold on Carbon Spec. 3, Mount B |
Each | € 476,70 | ||
617-3C | Ultra High Resolution Gold on Carbon Spec. 3, Mount C |
Each | € 476,70 | ||
617-3D | Ultra High Resolution Gold on Carbon Spec. 3, Mount D |
Each | € 476,70 | ||
617-3E | Ultra High Resolution Gold on Carbon Spec. 3, Mount E |
Each | € 476,70 | ||
617-3F | Ultra High Resolution Gold on Carbon Spec. 3, Mount F |
Each | € 476,70 | ||
617-3G | Ultra High Resolution Gold on Carbon Spec. 3, You Supply Mount |
Each | p.o.r. | ||
617-3K | Ultra High Resolution Gold on Carbon Spec. 3, Mount K |
Each | € 476,70 | ||
617-3L | Ultra High Resolution Gold on Carbon Spec. 3, Mount L |
Each | € 476,70 | ||
617-3M | Ultra High Resolution Gold on Carbon Spec. 3, Mount M |
Each | € 476,70 | ||
617-3O | Ultra High Resolution Gold on Carbon Spec. 3, Mount O |
Each | € 476,70 | ||
617-3P | Ultra High Resolution Gold on Carbon Spec. 3, Mount P |
Each | € 476,70 | ||
617-3Q | Ultra High Resolution Gold on Carbon Spec. 3, Mount Q |
Each | € 476,70 | ||
617-3R | Ultra High Resolution Gold on Carbon Spec. 3, Mount R |
Each | € 476,70 |
When operating at low accelerating voltages or using older instruments, difficulties may be experienced in imaging the standard gold on carbon resolution specimens.
This may be due to inferior resolution at low voltage or poor signal to noise ratio when operating at high scanning rates with small spot sizes.
The larger gold islands give high contrast while retaining small gaps for resolution measurement.
This makes the specimen easier to use at non-optimal operating conditions.
6mm dia. x 2mm.
SEM Holders
Type | Prod. No. | Data (D=Head dia.; P=Pin dia.; PL=Pin (length) | |
---|---|---|---|
A | 16111 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
B | 16261 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY |
C | 16221 | ![]() |
9.5mm dia. x 9.5mm Cylinder, JEOL |
D | 16281 | ![]() |
15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON |
E | 16291 | ![]() |
15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON |
F | 16111-9 | ![]() |
Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS |
G | You Supply Mount or Mount of Your Choice, not listed here (contact customer service) | ||
K | 16324 | ![]() |
15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
L | 16327 | ![]() |
25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
M | 16231 | ![]() |
12.2mm dia. x 10mm Cylinder, JEOL |
O | 16115 | ![]() |
31.7mm dia. x 6.47mm, Cambridge S4 Mount |
P | 16242 | ![]() |
Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head |
Q | 16153 | ![]() |
25mm dia. x 10mm Cylinder, JEOL |
R | 16144 | ![]() |
Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
617-4 | Low Voltage Resolution Gold on Carbon Spec. 4, Unmounted |
Each | € 232,10 | ||
617-4A | Low Voltage Resolution Gold on Carbon Spec. 4, Mount A |
Each | € 245,10 | ||
617-4B | Low Voltage Resolution Gold on Carbon Spec. 4, Mount B |
Each | € 245,10 | ||
617-4C | Low Voltage Resolution Gold on Carbon Spec. 4, Mount C |
Each | € 245,10 | ||
617-4D | Low Voltage Resolution Gold on Carbon Spec. 4, Mount D |
Each | € 245,10 | ||
617-4E | Low Voltage Resolution Gold on Carbon Spec. 4, Mount E |
Each | € 245,10 | ||
617-4F | Low Voltage Resolution Gold on Carbon Spec. 4, Mount F |
Each | € 245,10 | ||
617-4G | Low Voltage Resolution Gold on Carbon Spec. 4, You Supply Mount |
Each | p.o.r. | ||
617-4K | Low Voltage Resolution Gold on Carbon Spec. 4, Mount K |
Each | € 245,10 | ||
617-4L | Low Voltage Resolution Gold on Carbon Spec. 4, Mount L |
Each | € 245,10 | ||
617-4M | Low Voltage Resolution Gold on Carbon Spec. 4, Mount M |
Each | € 245,10 | ||
617-4O | Low Voltage Resolution Gold on Carbon Spec. 4, Mount O |
Each | € 245,10 | ||
617-4P | Low Voltage Resolution Gold on Carbon Spec. 4, Mount P |
Each | € 245,10 | ||
617-4Q | Low Voltage Resolution Gold on Carbon Spec. 4, Mount Q |
Each | € 245,10 | ||
617-4R | Low Voltage Resolution Gold on Carbon Spec. 4, Mount R |
Each | € 245,10 |
The larger gold particles, with clear separation, provide an excellent structure to setup the microscope.
Particle size range 0.1-1 m, for scanning electron microscopes and high magnification light microscopes.
Magnification range 800-10,000x.
SEM Holders
Type | Prod. No. | Data (D=Head dia.; P=Pin dia.; PL=Pin (length) | |
---|---|---|---|
A | 16111 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
B | 16261 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY |
C | 16221 | ![]() |
9.5mm dia. x 9.5mm Cylinder, JEOL |
D | 16281 | ![]() |
15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON |
E | 16291 | ![]() |
15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON |
F | 16111-9 | ![]() |
Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS |
G | You Supply Mount or Mount of Your Choice, not listed here (contact customer service) | ||
K | 16324 | ![]() |
15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
L | 16327 | ![]() |
25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
M | 16231 | ![]() |
12.2mm dia. x 10mm Cylinder, JEOL |
O | 16115 | ![]() |
31.7mm dia. x 6.47mm, Cambridge S4 Mount |
P | 16242 | ![]() |
Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head |
Q | 16153 | ![]() |
25mm dia. x 10mm Cylinder, JEOL |
R | 16144 | ![]() |
Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
623 | Medium Resolution Gold on Carbon Specimen 5, Unmounted |
Each | € 276,40 | ||
623-A | Medium Resolution Gold on Carbon Specimen 5, Mount A |
Each | € 280,30 | ||
623-B | Medium Resolution Gold on Carbon Specimen 5, Mount B |
Each | € 280,30 | ||
623-C | Medium Resolution Gold on Carbon Specimen 5, Mount C |
Each | € 280,30 | ||
623-D | Medium Resolution Gold on Carbon Specimen 5, Mount D |
Each | € 280,30 | ||
623-E | Medium Resolution Gold on Carbon Specimen 5, Mount E |
Each | € 280,30 | ||
623-F | Medium Resolution Gold on Carbon Specimen 5, Mount F |
Each | € 280,30 | ||
623-G | Medium Resolution Gold on Carbon Specimen 5, Mount G, You Supply Mount |
Each | p.o.r. | ||
623-K | Medium Resolution Gold on Carbon Specimen 5, Mount K |
Each | € 280,30 | ||
623-L | Medium Resolution Gold on Carbon Specimen 5, Mount L |
Each | € 280,30 | ||
623-M | Medium Resolution Gold on Carbon Specimen 5, Mount M |
Each | € 280,30 | ||
623-O | Medium Resolution Gold on Carbon Specimen 5, Mount O |
Each | € 280,30 | ||
623-P | Medium Resolution Gold on Carbon Specimen 5, Mount P |
Each | € 280,30 | ||
623-Q | Medium Resolution Gold on Carbon Specimen 5, Mount Q |
Each | € 280,30 | ||
623-R | Medium Resolution Gold on Carbon Specimen 5, Mount R |
Each | € 280,30 |