Products
MicroSlicer™
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
MicroSlicer® & NeoLinearSlicer®
by Dosaka – for Sectioning Fresh or Fixed Tissue
The Dosaka NeoLinearSlicer® and MicroSlicer® facilitate cutting of sections of soft tissues like brain, liver or similar difficult-to-section material. These vibratory tissue slicers are well known for their quality and superior performance, enjoying an excellent reputation in the neuroscience research community.
The Dosaka MicroSlicer® has a unique design for the vibratory motion of the cutting blade. To generate the shuttling blade motion in the MicroSlicer®, a smooth motorized system was adopted that is less prone to vertical vibration, compared to the traditional electromagnetic vibrating system. Traditional electromagnetic systems are limited to a set constant vibration frequency of the blade. In contrast, the MicroSlicer® allows adjustment to the shuttling frequency of the blade depending on the properties of the specimen. Thus, the MicroSlicer® can cut thinner sections more easily and efficiently.
The Dosaka NeoLinearSlicer® line of vibratory slicers builds upon the innovations of the previous generation of MicroSlicer® instruments with a linear motor system, redesigned chassis, and built-in vibration dampening base. The body is steel plate rather than plastic, diminishing vibrations caused by the resonance of the material. Taken together, these features enhance the cutting performance of these instruments to produce even thinner sections of fresh tissues. The NeoLinearSlicer® units additionally feature an upgraded operating system with an updated panel design. This modernization helps to further improve usability, with the added capability of automatic sectioning, while maintaining Dosaka’s distinct simple and clear interface.
Objective of the MicroSlicer® and NeoLinearSlicer®
The Dosaka MicroSlicer® and NeoLinearSlicer® are instruments designed to cut sections of animal or plant tissues, fresh or fixed, without freezing them.
In various fields of neuroscience, histochemistry, and cytochemistry, experiments are often conducted using fresh tissue slices or sections that are incubated in a media. Large tissue blocks and thick sections often end up with non-specific deposits of reaction products and areas of no reaction in the center of the specimen. This is due to poor penetration of the reaction media into the tissue. For this reason, thinner sections are preferred to perform histochemical and cytochemical reactions.
The simplest method to cut tissue sections is to cut frozen in a cryostat. However, it is well known that both cellular fine structure and enzyme activity suffer greatly from freezing and thawing. Non-frozen sections are therefore preferred for histochemistry and cytochemistry. In recent years, many types of fresh brain sections (200 to 500 micrometers in thickness) have been used in neurophysiological and pharmacological research. In addition, tissue sections are used in a variety of studies in the field of botany.
Traditionally, non-frozen tissue sections have been cut by hand with a razor blade or by using microtomes or tissue choppers. However, these methods have various drawbacks, such as the irregular thickness of tissue sections, difficulty of obtaining thin sections, or extremely slow sectioning speed. Such limitations are not the case when utilizing a MicroSlicer® or NeoLinearSlicer® for preparing non-frozen tissue sections.
Fresh tissue slices of the brain are also often used in the slice-patch method, blind-patch method, slice-culture method, etc. The success of these experiments depends on the quality of tissue slices, including how thin slices are cut and how well the tissue structure is preserved. With many tissue slicers, it is difficult to obtain high quality tissue slices due to abnormal blade vibration and significant loss of performance after long-term use. The MicroSlicer® and NeoLinearSlicer® allow any user to prepare quality tissue slices/sections easily and efficiently with minimal damage to tissues and cells.
Dosaka MicroSlicer® and NeoLinearSlicer® models:
- MicroSlicer® DTK-1000N – the basic model for manual operation
- MicroSlicer® Zero 1N – reduced Z-axis movement of the head for superior cutting quality, retraction function, manual operation but includes motorized specimen movement
- NeoLinearSlicer® MT – improved linear motor system and built-in vibration dampening base for minimal Z-axis vibration and highest cutting performance, retraction function, manual operation but includes motorized specimen movement
- NeoLinearSlicer® AT – improved linear motor system and built-in vibration dampening base for minimal Z-axis vibration and highest cutting performance, retraction function, automatic operation for continuous sectioning
The Dosaka MicroSlicer® vibratory tissue slicer systems feature a fixed cutting amplitude and an adjustable frequency. Even the entry level model, DTK-1000N, comes equipped with an auto-reverse mechanism and detachable bath. In addition to that, the Zero 1N has a stepping motor for vertical movement of the specimen, as well as a retraction function. The Zero 1N model features the MicroSlicer® Zero-Z technology with a redesigned cutting head for dramatically reduced Z-axis vibration. The layout of the switches on both sides of the tray allows for easy operation and reduced spillage on the controls.
The Dosaka NeoLinearSlicer® vibratory tissue slicer systems feature fully adjustable cutting amplitude, frequency, and speed; as well as a linear motor system, steel chassis, and built-in vibration dampening base for the highest level of cutting performance. Additionally, the system includes a stepping motor for vertical movement of the specimen, as well as a retraction function. The blade holder, ice bath, and specimen tray are all fully detachable. The NeoLinearSlicer® units additionally feature an upgraded operating system with an updated panel design. This modernization helps to further improve usability, with the added capability of automatic sectioning on the AT model, while maintaining Dosaka’s distinct simple and clear interface.
Applications: Neuroscience Research, Physiology, Immunocytochemistry, Pharmacology, Pathology, Immunofluorescence, Histology, Cytology, Botany

The retraction mechanism is a function included in the Zero 1N model that prevents the retracting blade from touching the face of the specimen.
The specimen tray is lowered by 120 micrometers after the cutting of each section and is raised by exactly the same distance when a new cutting cycle starts.
NLS-MT: manual model
The NeoLinearSlicer® line of vibratory slicers feature an improved linear motor system and built-in vibration dampening base for minimal Z-axis vibration (~1µm) and highest cutting performance.
The NeoLinearSlicer® MT is the base-level model of this line, utilizing manual operation aided by motorized specimen movement.
Features Include:
- Amplitude, frequency, and cutting speed dials
- Frequency display
- Function buttons: reverse, stop, forward
- Stage control buttons: up, down, retract
- Specimen up/down dial
- Linear Motor System
- Blade holder
- Specimen tray
- Ice bath
Specifications
Electrical | 120V or 220V, 50/60Hz |
Blade Oscillating Frequency | 50-100Hz |
Blade Oscillating Width | 0-2mm |
Cutting Speed | 0-44/mm/min |
Reverse Speed | 71mm/min |
Maximum Specimen Height | 15mm |
Specimen Retraction Function | yes |
Maximum Specimen Size | 30 x 30mm |
Specimen Advance | Motorized |
Blade Holder Size | For 30mm blade |
Automatic Operation | no |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10240-220 | NeoLinearSlicer® MT, 220V, 50/60Hz |
Each | p.o.r. |
NLS-AT: automatic model
The NeoLinearSlicer® AT is the top of the line model, having all of the features of the MT model with the added benefit of an upgraded, automatic operating system for continuous sectioning capabilities.
Features Include:
- Amplitude, frequency, and cutting speed dials
- Frequency display
- Cutting speed display
- Thickness display
- Slice length display
- Operation keyboard
- Linear Motor System
- Blade holder
- Specimen tray
- Ice bath
Specifications
Electrical | 220V, 50/60Hz |
Blade Oscillating Frequency | 50-100Hz |
Blade Oscillating Width | 0-2mm |
Cutting Speed | 0-90/mm/min |
Reverse Speed | 71mm/min |
Maximum Specimen Height | 15mm |
Specimen Retraction Function | yes |
Maximum Specimen Size | 30 x 30mm |
Specimen Advance | Motorized |
Blade Holder Size | For 30mm blade |
Automatic Operation | yes |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10250-220 | NeoLinearSlicer® AT, 220V, 50/60Hz |
Each | p.o.r. |
MicroSlicer® DTK-1000N
A robust, manual, entry-level microtome ideal for a busy laboratory with many users.
Specifications
Electrical | 230V, 50/60Hz |
Blade Oscillating Frequency | 0~50Hz |
Blade Oscillating Width | 2mm fixed |
Cutting Speed | 0-68/mm/min |
Reverse Speed | 104mm/min |
Maximum Specimen Height | 20mm |
Specimen Retraction Function | no |
Maximum Specimen Size | 25 x 30mm |
Specimen Advance | Manual |
Blade Holder Size | For 30mm blade |
Automatic Operation | no |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10000N-220 | MicroSlicer™ DTK-1000N, 220V, 50/60Hz |
Each | p.o.r. |
Specifications
Electrical | 230V, 50/60Hz |
Blade Oscillating Frequency | 0~50Hz |
Blade Oscillating Width | 2mm fixed |
Cutting Speed | 0-68/mm/min |
Reverse Speed | 104mm/min |
Maximum Specimen Height | 20mm |
Specimen Retraction Function | yes |
Maximum Specimen Size | 25 x 30mm |
Specimen Advance | Motorized |
Blade Holder Size | For 30mm blade |
Automatic Operation | no |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10111N-220 | Microslicer™ DTK-Zero 1N, 220V, 50/60Hz |
Each | p.o.r. |
Accessories
MicroSlicer Blade Holder
Black nylon and stainless steel
Fits MicroSlicers above. Does not fit MicroSlicer 1500E.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10110-20B | Microslicer™ Blade Holder |
Each | € 499,90 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10112 | Tool for Microslicer™ Blade Exchange |
Each | € 32,80 |
MicroSlicer Bath
Fits the new models DTK-1000N and Zero 1N.
Does not fit DTK-3000W and older models.
The removable bath can be chilled in a freezer for additional cooling power. Thus it is convenient to have more than one bath for the MicroSlicer DTK-1000N or Zero 1N .
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10116N | MicroSlicer™ Bath |
Each | € 2.250,70 |
Specimen Tray for MicroSlicer DTK-1000N and Zero 1N
Fits the new models DTK-1000N and Zero 1N.
Does not fit DTK-3000W and older models.
The redesigned tray is deeper (15mm) and is attached to the instrument by magnetic force, allowing for easy and flexible orientation of the specimen for sectioning.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10113N | Specimen Tray for MicroSlicer™ DTK-1000N and Zero 1N |
Each | € 721,10 |
Feather Blades
Carbon steel; sharp edges.
Break in half lengthwise for use (protect fingers and use eye protection).
This is the preferred cutting blade for use with the PELCO easiSlicer.
Ideally suited for use with Microslicer, Vibratome and other vibratory slicers.
Excellent when used as is (unbroken) in McIlwain Tissue Chopper.
- Length: 42.8mm
- Cutting Edge Length: 36mm
- Width: 22mm
- Thickness: 0.127mm
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
121-9 | Feather Double Edge Carbon Steel Blades |
10 | € 18,40 |
Specimen Tray for MicroSlicer DTK-3000W
Fits MicroSlicer DTK-3000W and older models.
Inside dimensions:
70 x 70 x 9.5mm
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10113 | Microslicer™ Specimen Tray |
Each | € 405,70 |
Replacement Twin Bulb
for Microslicer Models 1000 and 1500E
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10174 | Replacement, Twin Bulb for Microslicer™ models 1000, 1500E, Zero-1 and 3000W |
Each | € 142,40 |
Double Edge, Breakable Style Razor Blades
PTFE-Coated stainless steel, individually wrapped and bulk packed.
Break in half lengthwise for use (protect fingers and use eye protection).
Suitable blade for PELCO easiSlicer, Microslicer, Vibratome and other brands of vibratory microtomes.
Suitable alternative to Feather blades when used as is (unbroken) in McIlwain Tissue Chopper.
- Length: 42.9mm
- Cutting Edge Length: 37.1mm
- Width: 21.7mm
- Thickness: 0.11mm (0.004″)
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
121-6 | Double Edge Stainless Steel Cutting Blades |
250 | € 120,50 |
Injector Style Stainless Steel, PTFE-Coated Blades
Acceptable for use with Microslicer, Vibratome and other vibratory microtomes.
Single edge, 20 per dispenser.
- Length: 38.1mm
- Cutting Edge Length: 36.3mm
- Width: 8mm
- Thickness: 0.25mm (0.010″)
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
121-4 | Injector Blades, 20 blades in dispenser |
Each | € 15,80 |