Products
FIB Grid Holders
PELCO Fortress FIB Holder & Sample Loader
The PELCO Fortress FIB Holder is used for TEM sample preparation and storage. The PELCO Fortress FIB Holder is the former South Bay Technology Fortress FIB Holder.
FIB lift-out grids are clamped securely in place by a tensioned spring without the need for adhesives.
Sample loading is easy when the PELCO Fortress FIB Holder is paired with the Sample Loader.
Paired with a pin stub desiccator or other pin stub storage container, the PELCO Fortress FIB Holder securely stores FIB grids with lamella attached. This holder is suitable for all FIB/SEM systems which accept pin mount holders such as Thermo Fisher Scientific/FEI, ZEISS and Tescan systems. For the JEOL and Hitachi systems a pin mount adapter is needed.
Overall size is 20.7 x 14.6 x 13.2mm (0.81 x 0.5″ x 0.52″), pin included. Standard 3.2mm (1/8″) pin.
Material: vacuum grade aluminum with stainless steel thumbscrew.
Screw used is 4-40 x 1/2, Thumb, Stainless Steel
Technical Note
 |
Download Technical Note |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15484 | PELCO Fortress FIB Holder, Pin |
Each | € 176,00 | ||
| 15484-1 | PELCO Fortress Sample Loader |
Each | € 85,10 |
PELCO Small FIB Grid Holder
Simple, but effective PELCO FIB grid holder based on a standard 12.7mm (1/2″) pin stub.
This holder holds up to 2 FIB grids of the same thickness.
Can also be used to safely store FIB grids with thin sections with attached to them.
Overall dimensions are 12.7mm (1/2″) x 7.8mm (0.3mm) H w/o pin.
Pin is standard 3.2mm (1/8″).
Material: vacuum grade aluminum with brass screw.
Philips screwdriver #0 included.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15464 | PELCO Small FIB Grid Holder, 12.7mm, Pin |
Each | € 88,00 |
PELCO Single 1/2″ FIB Sample and Grid Holder
The PELCO single FIB sample and Grid holder holds an FIB sample mounted on standard 1/2″ (12.7mm) pin stub for FIB milling and lift-out procedures.
It also holds two FIB grids conveniently close to the sample to mount prepared TEM lamellae on the FIB grid for subsequent TEM imaging.
Compact and cost effective holder suitable for all FIB/SEM systems which accept pin mount holders, such as the FEI, ZEISS and Tescan systems.
For the JEOL and Hitachi systems a pin mount adapter is needed.
Made of vacuum grade aluminum with brass screws.
Philips screwdriver #0 included.
Overall size is 22.4 x 12.7 x 11.7mm (0.88″ x 0.5″ x 0.46″).
Standard 3.2mm (1/8″) pin.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15467 | PELCO Single 1/2″ FIB Sample and Grid Holder, Pin |
Each | € 394,40 |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15464-20 | Replacement Brass Screws |
10 | € 12,50 |
