Products
Vise Type Holders
Small Set Screw Vise
Small set screw vise with an open slot of 4mm (0.157″) wide and 5mm (0.197″) deep. 15 x 12mm x M4.
Material: machined aluminum with stainless steel allen set screw.
Allen wrench included.
Screw used is M3 x 6mm set screw, stainless steel.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16335 | Small Set Screw Vise, M4, 15 x 12mm H, M4 |
Each | € 35,40 |
Set screw vise with an open slot of 10mm (.394″) wide x 5mm (0.197″) deep. 25mm (1″) x 10mm (0.394″) high.
Material: machined aluminum with stainless steel set screw.
Allen wrench included.
Screws used are M3 x 6mm, flat head set screw, stainless steel and M3 x 8mm, flat head set screw, stainless steel.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16371 | Large Set Screw Vise, 25x10mm H, M4 |
Each | € 64,40 |
Large Double Slotted Set Screw Vise with 2 ea. 2.5mm by 5mm deep slots.
Dimensions 25×10 mm (1 x 0.4″).
Clamp thin specimens and cross sections without the need for tape of conductive paint.
Material: machined aluminum with 2 stainless steel allen set screws.
Allen wrench included.
Screw used is M3 x 6mm, flat head set screw, stainless steel.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16372 | Large Double Slotted Set Screw Vise, 25mm x 10mm H, M4 |
Each | € 48,10 |
Double slotted set screw vise with 2 ea. 1mm wide x 3mm deep slots to clamp thin specimens or cross sections.
Simple but effective design to hold wafers and thin samples up to 1mm (.039″) thick. 15mm dia x 6mm H.
Made of aluminum with 2 stainless steel allen set screws.
Allen wrench included.
Screw used is M2 x 3mm, Set, Stainless Steel
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16341 | Double Slotted Set Screw Vise, M4, 15 x 6mm H |
Each | € 34,60 |
Cylinder Micro Vice Holder
The Cylinder Micro Vice holds a variety of specimens.
The maximum gap is 11mm (7/16″).
The jaws are 25.4mm (1″) wide.
Accurately machined from aluminum with a stainless steel screw.
An Allen wrench is included.
The Cylinder Micro Vice Holders have a threaded M4 hole that allow direct loading or using Hitachi Stub Extensions on Hitachi SEMs stage.
Screws used are 6-32 x 3/4 vented socket cap head screw, stainless steel and 6-32 x 5/16 flat head screw, stainless steel.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15340-4 | Micro Vise Holder, M4 |
Each | € 165,00 |
Small Springloaded Vise Clamp
Small Springloaded vise clamp for samples up to 12.7mm (1/2″).
The jaws are 25mm (1″) wide.
Jaws also accommodate 1/16″ x 1/2″ stainless steel pins for more awkward shaped samples.
4 pins are included.
Removable pushrod for easy loading is provided.
Material: machined aluminum with stainless steel pins and springs.
Overall size w/o pushrod 30 x 25 x 12.5mm (1.18″ x 1″ x “).
Screw used is 2-56 x 1/8 cup point set screw, stainless steel.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15341-4 | Small Springloaded Vise Clamp, M4 |
Each | € 276,10 |
Universal Springloaded Vise
Springloaded vise clamp with reversible jaws for an opening up to 38mm.
The universal jaws have special slots to firmly hold round samples of various diameters both horizontally and vertically.
Maximum width of the jaws is 32mm.
Material: machined aluminum with stainless steel springs, rods, screws, washers, and brass sliders.
Overall size of the vise clamp is 67 x 52 x 20mm (2.64″ x 2″ x 0.8″).
M4 threaded hole in base.
Screws used are 2-56 x 1/8 cup point set screw, stainless steel and 4-40 x 1/4 , stainless steel.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15342-4 | Universal Springloaded Vise with Reversible Clamps, M4 |
Each | € 316,30 |
Springloaded Vise Clamp
Springloaded vise clamp for samples up to 26mm.
The jaws are 25mm (1″) wide.
Jaws also accommodate 1/16″ x 1/2″ stainless steel pins for more awkward shaped samples.
4 pins are included.
Removable pushrods for easy loading are provided.
Material: machined aluminum with stainless steel pins and springs.
Overall size of vise clamp w/o pin and push rods 50 x 25 x 15mm (2″ x 1″ x 5/8″).
Screw used is 2-56 x 1/8, Set Cup, SS
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15343-4 | Springloaded Vise Clamp, pin |
Each | € 403,40 |
Thin Specimen Split Mount Holder
Simple but effective design to hold wafers and thin samples up to 3.2mm (1/8″). 15mm dia x 10mm H.
Made of aluminum with stainless steel allen screws.
Allen wrench included.
Screw used is 2-56 x 1/4 hex set screw, stainless steel.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15335-4 | Thin Specimen Split Mount Holder, M4 |
Each | € 38,70 |
Tube/Needle Clamp
A small tube, needle or wire clamp based on a standard 15x10mm cylinder mount with M4 thread.
Ideal for examining wire cross sections or needle tips.
Holds wires, tubes and needles up to 2mm (0.008″)
Hole is 5mm (0.20″) deep.
Material: vacuum grade aluminum with a stainless steel set screw. Allen wrench included.
Screw used is 2-56 x 1/8 cup point set screw, stainless steel.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15490 | Tube/Needle Clamp, 15 x 10mm, M4 |
Each | € 38,00 |
