Products
Equipment
designed as a temperature controlled surface
will enhance most tissue processing steps
The PELCO ColdSpot Pro is designed for microwave processing techniques that benefit from an efficient heat transfer between the PELCO ColdSpot surface and the sample.
This product design provides excellent temperature control for electron microscopy tissue processing, immunolabeling and in situ hybridization protocols.
The glass surface dissipates heat quickly and efficiently. This design creates a flat surface across the entire glass top enabling a wide range of usage with consistency.
The temperature of the water inside this PELCO ColdSpot should not exceed 60 C (140 F) because the thermal properties of the plastic and the adhesive will be compromised at higher temperatures.
All PELCO Microwave processors can be set to maintain the temperature below this critical point. Designed for use with 3536 PELCO Vacuum Chamber.
Glass plate area dimensions: 223 W x 291mm D (8.78 W x 11.34″ D)
Overall dimensions: 267 W x 381 D x 108mm H (10.5 W x 15 D x 4.25″ H)
Technical Note
 |
Download Technical Note |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 36116-10 | PELCO ColdSpot Pro |
Each | € 1.475,10 |
designed for higher solution temperatures
The PELCO ColdSpot Plus is designed for microwave processing techniques that benefit from retained heat and higher solution temperatures.
The unique construction of this PELCO ColdSpot is designed for the temperature requirements encountered during paraffin processing applications.
The all-welded construction combined with the solvent resistant and thermal properties of the plastic make it the ideal choice when processing solution temperatures of 50 C (122 F) or higher are required.
This PELCO ColdSpot Plus design provides control of the microwave environment while meeting the demands presented during high temperature processing techniques.
Top work area dimensions: 267 W x 286mm D (10.5 W x 11.25″ D)
Overall dimensions: 267 W x 356 D x 105mm H (10.5 W x 14 D x 4.125″ H)
Technical Note
|
Download Technical Note |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 36116-20 | PELCO ColdSpot Plus |
Each | € 999,60 |
PELCO SteadyTemp Pro
Solid State Chiller with Digital Control
Fully integrates with the PELCO BioWave Pro+ Microwave System to provide temperature control at the sample level.
The PELCO Steady Temp Pro is specially designed to work in tandem with the PELCO BioWave Pro+ microwave system.
This chiller provides temperature control at the sample level within the microwave chamber.
The technology of the PELCO ColdSpotPro combined with the PELCO SteadyTemp Pro Solid State Chiller offers the unique ability to provide continuous temperature control from 4 C to 80 C.
The compact design, fully integrated controls linked to the PELCO BioWave Pro+ system, and reliable Freon-free technology make the PELCO SteadyTemp Pro an essential accessory for any laboratory microwave processing application.
| Exterior Dimensions: | 234 x 280 x 324mm (12.75″ x 11″ x 12.75″) |
| Weight: | 61.6 kg (28 lb) |
| Electrical: | Universal Voltage 115-230 VAC, 50/60 Hz, 7/5 A |
| Noise Level: | 60 dba. |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 50062 | PELCO SteadyTemp™ Pro Digital Thermoelectric Recirculator |
Each | € 7.361,30 |
