Products
Mounting Adhesives
Crystalbond Mounting Adhesives
Wash away adhesives are ideal for temporary mounting of products that require dicing, polishing and other machining processes.
They exhibit high bond strength and adhere readily to metals, glass and ceramics by melting with heat.
When processing is complete, the adhesives are removed by reheating and cleaning with environmentally friendly cleaning agents.
Typical Applications:
|
 |
| Crystalbond 509 bonds an advanced ceramic which is diced into 25-50 mil sections. |
Crystalbond 555 & 555-HMP
A low melting point adhesive for moderate stress machining processes.
It is transparent in thin cross-sections and is soluble in hot water.
555 has a Flow Point of 54 °C; 555-HMP is 66 °C.
Crystalbond 590
A high strength, resilient adhesive system, ideal for doing miniature and tall parts.
It is soluble in methanol or IPA.
| Type | 555 | 555-HMP | 590 |
|---|---|---|
| Trade Name | Crystalbond | Crystalbond |
| Form | Stick | Stick |
| Size (mm) |
12,7 x 25,4 x 178 | 16 x 32 x 190 |
| Weight (g) |
86/stick | 200/stick |
| Flow Point °C | 54 / 66 | 150 |
| Viscosity, cps | 500 | 9,000 |
| Color | White | Brown |
| Solvent | Water | Methanol or IPA |
MSDS
 |
Download Material Safety Data Sheet – SDS for Crystalbond™ 509-1 and 509-3, Prod. No. 821-1 and 821-3 |
|
Download Material Safety Data Sheet – SDS for Crystalbond™ 555, Prod. No. 821-2 |
|
Download Material Safety Data Sheet – SDS for Crystalbond™ 590, Prod. No. 821-4 |
|
Download Material Safety Data Sheet – SDS for Crystalbond™ 555-HMP, Prod. No. 821-6 |
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 821-3 | Crystalbond™ 509-3, clear |
90g | € 61,90 | ||
| 821-2 | Crystalbond™ 555 |
68gr | € 41,50 | ||
| 821-6 | Crystalbond™ 555-HMP |
68gr | € 43,00 | ||
| 821-4 | Crystalbond™ 590 |
200g | € 90,00 |
Wafer-Mount 559 A clear adhesive on a plastic film that is ideal for holding silicon wafers, alumina, or glass substrates for scribing.No heating is required; just remove the paper backing to expose the adhesive layer, position the wafer substrate on the film and press down with firm pressure to insure adhesion.
A vacuum manifold or mechanical device may be used to hold wafer/plastic film during dicing or scribing.
After dicing or scribing acetone or MEK may be used to separate the specimen from the Wafer-Mount 559.Size is 254 x 254 x 0.127mm thick in packages of 2.
Ideal for scribing/dicing wafers with vacuum hold down fixturing.
| Form | Sheet |
| Size | 0.127mm x 254mm x 254mm |
| Color | Clear |
| Solvent | Acetone or MEK |
Application Procedures:
- Cut the Wafer-Mount sheet to the desired shape and size and peel the backing paper away from the plastic film. Place the wafer, face up, onto the exposed sticky surface of the adhesive film. Press firmly to assure good adhesion.
Please note: The adhesive sheet should be placed on the dull or back side of the wafer, not the top or shiny side. - Process the substrate as required, then remove parts by heating in a well ventilated area to 150 °C (300 °F) for 2-3 minutes until the adhesive softens. Use a tool to slide the substrate off the mounting plate.
- Clean with acetone or MEK.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 821-7 | Wafer-Mount™ 559 Mounting Adhesive |
2 | € 60,90 |
Wafer-Mount 562 Mounting Adhesive
Thermoplastic white film adhesive with good adhesive properties.
Ideal for mounting thin, fragile substrates for which a predictable film thickness is required.
Flow point is 93 °C.
Soluble in 562-S Stripper.
A non-flammable, biodegradable, water-rinsable solvent.
Size is 203 x 254 x 0,08mm thick in packages of 10.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 821-8 | Wafer-Mount™ 562 Mounting Adhesive |
10 | € 153,50 |
Wafer-Mount 562-S Stripper
Removes Wafer-Mount and other polymer coatings.
Environmentally-safe, low evaporation rate, water rinsable, non-flammable, biodegradable and non-reactive with metals.
Recommended for use in an ultrasonic cleaner.
Rinse with warm water.
Use with protective gloves, eye goggles, and ventilation or fume hood.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 821-9 | Wafer-Mount™ 562-S Stripper |
4,5l | € 284,70 |
