Products
Wafer Handling
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
Porta-Wand and Porta-Vac II
- Portable self-contained continuous vacuum systems
- Uses no hoses, replaces tweezers and hose-style wands
- High-performance pumps, lifts over 500 grams
- Handles up to 12 inch wafers, disk media or flat, hard surface items
- Flashing LED indicates low battery
- 9.6 volt NiMH rechargeable battery system (optional on Porta-Vac ll)
- Includes one ESD-safe molded wafer tip, additional tips available
- Tested to Class 1 cleanroom levels, customer replaceable 0.2 micron filter
- Vacuum up to 22 inches of mercury at sea level
- Weighs only 6 ounces with battery
- Exhaust exits from rear, away from wafer
- Universal 110-220V charger (optional for Porta-Vac II)
Porta-Wand
Picks up 4, 6, 8, or 12″ wafers (100, 150, 200, 300mm), solar cells, disk media, or flat, hard surface items.
The Porta-Wand kit comes with a fixed internal 9.6V NiMH rechargeable battery, in-stand charger and one ESD safe, wafer tip.
Lifts over 500 grams.
A PUSH-BUTTON provides easy on/off control and a “battery-low” indicator flashes when recharging is required.
The internal air filter is replaceable from the front of the tool, and an internal exhaust filter ensures better than Class 1 performance.
Rear exhaust of the pump air is standard.
Optional wall mounting bracket is available.
Battery Facts:
Battery Type: 9.6 Volt NiMH, Fixed, Rechargeable
Battery Charge Time: 120 minutes for a full charge
Continuous Run Time: 2 to 3 hours
Number of Complete Recharges: Up to 1000
Battery Replacment: Factory replaceable
Vacuum:
Minimum of 15 to 20″ of mercury depending on elevation and atmospheric pressure.
Dimensions (Length x Height x Width):
Wand: 178mm x 30mm x 21mm
Stand: 114mm x 51mm x 98mm
Weight:
Porta-Wand: 154 grams
Charger Stand: 298 grams
Transformer: 454 grams
Operating Temperature Range:
10 C to 45 C
Recharger Power Requirements:
Approved power supplies include supplied In-Stand Charger; Universal 110-220V.
Wall plug-in power supply 24 VDC @ 500ma.
Barrel jack size 5.5mm OD x 2.1mm ID.
Center pin positive.
12″ wafer model includes operational vacuum indicator that signals when it is safe to lift the wafer.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
52901 | Porta-Wand with ESD safe flat wafer tip for up to 4″ (100mm) wafers, with 115V In-stand Charger, and 9.6 Volt Rechargeable NiMH Battery |
Each | € 2.950,20 | ||
52902 | Porta-Wand with ESD safe flat wafer tip for up to 6″ (150mm) wafers, with 115V In-stand Charger, and 9.6 Volt Rechargeable NiMH Battery |
Each | € 2.950,20 | ||
52903 | Porta-Wand with ESD safe flat wafer tip for up to 8″ (200mm) wafers, with 115V In-stand Charger, and 9.6 Volt Rechargeable NiMH Battery |
Each | € 2.950,20 | ||
52904 | Porta-Wand with ESD safe flat wafer tip for up to 12″ (300mm) wafers, with operational vacuum indicator and In-stand Charger, and 9.6 Volt Rechargeable NiMH Battery |
Each | € 3.416,40 | ||
52909 | Porta-Wand and Porta-Vac II In-stand Charger with 9.6 Volt Rechargeable NiMH Battery, 110-220V |
Each | € 726,50 | ||
52912 | Porta-Wand with hard anodized wafer tip for up to 6″ (150mm) wafers, with 115V In-stand Charger, and 9.6 Volt Rechargeable NiMH Battery |
Each | € 2.201,80 | ||
52920 | Air Intake Filters for Porta-Wand |
5 | € 90,40 |
Porta-Vac II
Picks up 4, 6, or 8 inch wafers (100, 150, 200mm), solar cells, disk media, or flat, hard surface items.
The Porta-Vac II kit comes with one ESD safe, molded wafer tip.
Lifts over 500 grams. A disposable 9V battery is included.
A large switch provides easy on/off control. A battery-low indicator flashes red when the battery needs to be changed or recharged.
A switch setting on the bottom of the tool allows the selection of an alkaline battery or NiMH battery discharge characteristics for the battery-low indicator.
A replaceable, internal air filter is accessible from the front of the tool.
The Class 1 exhaust filter ensures clean operation.
Rear exhaust of the pump air is standard.
An optional rechargeable battery pack and 110-220V in-stand charger is also available.
Battery Type/Hours of Continuous Running Time:
9.6Volt NiMH / 3 to 4 Hours
9 Volt Alkaline / 12 to 15 Hours
9 Volt Carbon / 4 to 5 Hours
9 Volt Lithium / 36 to 40 Hours
Vacuum:
Minimum of 15 to 20″ of mercury depending on elevation and atmospheric pressure.
Dimensions (Length x Height x Width): 185mm x 28mm x 20mm
Add 15.23mm to the length when using rechargeable battery pack.
Weight:
With Battery 171 grams
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
52905 | Porta-Vac II with ESD safe flat wafer tip for up to 4″ (100mm) wafers, and 9 Volt Non-rechargeable Battery |
Each | € 1.559,60 | ||
52906 | Porta-Vac II with ESD safe flat wafer tip for up to 6″ (150mm) wafers, and 9 Volt Non-rechargeable Battery |
Each | € 1.630,50 | ||
52907 | Porta-Vac II with ESD safe flat wafer tip for up to 8″ (200mm) wafers, and 9 Volt Non-rechargeable Battery |
Each | € 1.793,50 | ||
52920-29 | Air Intake Filters for Porta-VacII |
5 | € 90,40 |
ExP Vacuum Wand Kits
The externally pumped ExP vacuum wand kits are a perfect and cost effective alternative to the Porta-Wand and Porta-Vac II systems; just use a suitable vacuum pump or an in-house vacuum line.
The ExP vacuum wand kits use the same size wafer tips as the Porta-Wand and Porta-Vac II.
The ExP vacuum wand has a push-button to release the wafer.
The kit comes with a wand holder designed to keep the push button depressed in order to close the vacuum line when the vacuum wand is not used.
Comes complete with 3mm ID coiled vacuum hose. The PELCO Vacuum Pick-Up Pump (Product No. 520) can be used as vacuum source.
- Available for 4, 6, 8 and 12″ wafers, solar cells, disk media, or flat hard surfaces
- Lifts over 500 grams (depending on vacuum level provided)
- Includes stand and coiled vacuum hose
- Kit includes ESD safe molded flat wafer tip
- Compatible with PELCO #520 Vacuum Pick-up pump
- Vacuum needed is approx. 8 inches of Mercury
- Length 7″ (177.8mm), diameter 0.5″ (12.7mm)
![]() |
![]() |
52938 | 52938 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
52931 | ExP Vacuum Wand Kit with ESD safe flat wafer tip for up to 4″ (100mm) wafers, 1/8 coiled hose, and stand |
Each | € 672,30 | ||
52932 | ExP Vacuum Wand Kit with ESD safe flat wafer tip for up to 6″ (150mm) wafers, 1/8 coiled hose, and stand |
Each | € 672,30 | ||
52933 | ExP Vacuum Wand Kit with ESD safe flat wafer tip for up to 8″ (200mm) wafers, 1/8 coiled hose, and stand |
Each | € 672,30 | ||
52934 | ExP Vacuum Wand Kit with ESD safe flat wafer tip for up to 12″ (300mm) wafers, 1/8 coiled hose, and stand |
Each | € 699,10 | ||
52938 | ExP Push-Button Wand for 1/8″ hose |
Each | € 365,20 | ||
52939 | Holder for Push-Button Wand |
Each | € 242,70 |
Interchangeable ESD-Safe Wafer Tips
for Porta-Wand, Porta-Vac II, and ExP Vacuum Wand
ESD-safe, up to 100 °C
These wafer tips are molded from ESD-safe PEEK plastic to handle wafers up to 100 C.
The low profile of the wafer tip head provides easy access to wafers in industry standard boats.
These tips attach to all of our wafer handling tools as well as competitive systems.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
52920-4 | Molded Flat Wafer Tip, for 4″ |
Each | € 152,40 | ||
52920-6 | Molded Flat Wafer Tip, for 6″ |
Each | € 152,40 | ||
52920-8 | Molded Flat Wafer Tip, for 8″ |
Each | € 159,30 | ||
52920-12 | Molded Flat Wafer Tip, for handling larger sized wafers (no left or right angles available) |
Each | € 167,40 |
Interchangeable Hard Anodized Aluminum Wafer Tips for Porta-Wand, Porta-Vac II and ExP Vacuum Wand
These wafer tips are made from precision machined hard anodized aluminum for high temperature applications up to 250 C.
The wafer handling tips come complete with 76.2mm long.
Straight, stainless 2.39mm diameter tube covered with a PTFE sleeve.
The press fit adapter is made from static dissapative plastic.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
52920-14 | Hard Anodized Aluminum Wafer Tips, up to 4″ (100mm) wafers |
Each | € 171,00 | ||
52920-16 | Hard Anodized Aluminum Wafer Tips, up to 6″ (150mm) wafers |
Each | € 171,00 | ||
52920-18 | Hard Anodized Aluminum Wafer Tips, up to 8″ (200mm) wafers |
Each | € 171,00 |