Products
Micro Tools – Steel Tips
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
Micro-Tools with Interchangeable Stainless Steel Tips
All the Micro-Tools with stainless steel tips are forged from 304 grade stainless steel, followed by precision grinding, lapping and polishing steps to create the ultimate in precision manipulation tools.
The stainless steel Micro-Tools withstand corrosion better than tool steels are more suitable for moist or wet environments encountered in pharmaceutical, medical, biological and biochemistry applications.
The Micro-Tools with stainless steel tips (and No. 32 Micro Hook which is made of tool steel/gold plated) are mounted in stainless steel tool cones.
Stainless steel tools are not as hard as the Micro-Tools made from hardened tool steels.
All Micro-Tools fit both the standard aluminum and the stainless steel Micro-Tool handle (sold separately).

Shank Size | |||||||
---|---|---|---|---|---|---|---|
# Tip style | Micro-Tool | Description | 0.025mm | 0.12mm | 0.25mm | 0.50mm | 1mm |
1 | ![]() | Micro-Needle, Long | 13601A | 13601 | 13601B | 13601C | 13601D |
2 | ![]() | Micro-Engraver, triangular | —– | 13602B | 13602C | 13602 | 13602D |
3 | ![]() | Micro-Chisel | —– | 13603B | 13603C | 13603 | 13603D |
4 | ![]() | Micro-Spade | —– | 13604B | 13604C | 13604 | 13604D |
5 | ![]() | Micro-Fork | —– | —– | 13605 | 13605A | —– |
6 | ![]() | Micro-Mirror, forward, Stainless Steel | —– | —– | —– | 13606 | —– |
7 | ![]() | Micro-Ruler, 10mm, 0.1mm div. | —– | —– | —– | 13607 | —– |
8 | ![]() | Micro-Knife, 20° | —– | 13608B | 13608C | 13608 | 13608D |
9 | ![]() | Micro-Knife, 45° | —– | 13609B | 13609C | 13609 | 13609D |
10 | ![]() | Micro-Mirror, forward, Stainless Steel | —– | —– | —– | 13630 | —– |
11 | ![]() | Micro-Prober, 90° | —– | —– | 13633 | 13633A | —– |
12 | ![]() | Micro-Prober, 45° | —– | —– | 13612A | 13612 | —– |
13 | ![]() | Micro-Engraver, oval | 13611A | 13611B | 13611C | 13611 | 13611D |
14 | ![]() | Micro-Brush, single natural fiber | —– | —– | —– | 13614 | —– |
15 | ![]() | Micro-Diamond Scribe, 60° | —– | —– | 13615A | 13615 | —– |
16 | ![]() | Micro-Spatula, flexible, Stainless Steel | —– | —– | —– | 13616 | —– |
17 | ![]() | Micro-Manipulator, A-type | —– | —– | —– | 13617 | —– |
18 | ![]() | Micro-Hook, 90° | —– | —– | 13618 | 13619 | —– |
19 | ![]() | Micro-Burnisher, glass sphere | —– | —– | —– | 13637 | —– |
20 | ![]() | Micro-Hook, 180° | —– | —– | 13620A | 13620 | —– |
21 | ![]() | Micro-Scraper, triangular | —– | 13613B | 13613C | 13613 | 13613D |
22 | ![]() | Micro-Saw | —– | —– | —– | 13622 | —– |
23M | ![]() | Micro-Scale, 5mm, 0.1mm div., Stainless Steel | —– | —– | —– | 13629 | —– |
23I | Micro-Scale, 0.2″, 0.005″ div., Stainless Steel | —– | —– | —– | 13638 | —– | |
24 | ![]() | Micro-Needle, short | 13624A | 13624 | 13624B | 13624C | 13624D |
25 | ![]() | Ultra Micro-Needle, straight, 5 µm radius tip, Tungsten | —– | 13625 | 13625A | 13625B | —– |
26 | ![]() | Ultra Micro-Needle, 30°, 5 µm radius tip, Tungsten | —– | 13626 | 13626A | 13626B | —– |
27 | ![]() | Ultra Micro-Needle, 90°, 5 µm radius tip, Tungsten | —– | 13627 | 13627A | 13627B | —– |
28 | ![]() | Micro-Carbide Scribe, 5 µm radius tip | —– | 13628A | 13628B | 13628C | —– |
29 | ![]() | Micro-Diamond File, round | —– | —– | 13639A | 13639 | —– |
30 | ![]() | Micro-Diamond File, triangular, 1mm edge to edge | —– | —– | —– | 13632 | —– |
31 | ![]() | Micro-Loop, 2mm dia | —– | —– | —– | 13631 | —– |
Available Handles and Storage Case:
Micro-Tool Handle, 120mm light weight, anodized aluminum or Stainless Steel
Micro-Tool hardwood storage case for 8 tips and handle
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
13600 | Micro-Tool Handle, 120mm (4.75″) long, light weight, anodized aluminum |
Each | € 31,40 | ||
13675 | Micro-Tool Handle, 120mm (4.75″) long, Stainless Steel |
Each | € 58,90 | ||
13640 | Micro-Tool hardwood storage case for 8 tips and handle |
Each | € 120,20 |
These are the original Micro-Tools made from first grade hardened tool steel (unless otherwise noted) manufactured to precise and durable tips.
Tips are precision ground, lapped and polished with the close tolerances needed for microscopy scale applications.
Available in various configurations and shank sizes 0.025, 0.120, 0.250, 0.50 and 1mm for select tips.
The Micro-Tool tips are mounted in anodized tool cones.
All Micro-Tools fit the Micro-Tools handle (sold separately).
Threads are 8-32.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
13601A | Micro-Needle, Long, 0.025mm (0.001″) |
Each | € 113,30 | ||
13601 | Micro-Needle, Long 0.12mm (0.005″) |
Each | € 92,90 | ||
13601B | Micro-Needle, Long, 0.25mm (0.010″) |
Each | € 70,30 | ||
13601C | Micro-Needle, Long, 0.50mm (0.020″) |
Each | € 51,00 | ||
13601D | Micro-Needle, Long, 1.0mm (0.040″) |
Each | € 62,60 | ||
13602B | Micro-Engraver, triangular 0.12mm (0.005″) |
Each | € 148,60 | ||
13602C | Micro-Engraver, triangular 0.25mm (0.010″) |
Each | € 101,30 | ||
13602 | Micro-Engraver, triangular 0.50mm (0.020″) |
Each | € 92,90 | ||
13602D | Micro-Engraver, triangular 1.0mm (0.040″) |
Each | € 94,90 | ||
13603B | Micro-Chisel, 0.12mm (0.005″) |
Each | € 99,10 | ||
13603C | Micro-Chisel, 0.25mm (0.010″) |
Each | € 78,70 | ||
13603 | Micro-Chisel, 0.50mm (0.020″) |
Each | € 68,20 | ||
13603D | Micro-Chisel, 1.0mm (0.040″) |
Each | € 78,70 | ||
13604B | Micro-Spade, 0.12mm (0.005″) |
Each | € 99,10 | ||
13604C | Micro-Spade, 0.25mm (0.010″) |
Each | € 78,70 | ||
13604 | Micro-Spade, 0.50mm (0.020″) |
Each | € 68,20 | ||
13604D | Micro-Spade, 1.0mm (0.040″) |
Each | € 78,70 | ||
13605 | Micro-Fork, 0.25mm (0.010″) |
Each | € 86,00 | ||
13605A | Micro-Fork, 0.50mm (0.020″) |
Each | € 62,60 | ||
13606 | Micro-Mirror, forward, St. St., 0.50mm (0.020″) |
Each | € 86,00 | ||
13607 | Micro-Ruler, 10mm with 0.1mm div, 0.50mm (0.020″) |
Each | € 90,40 | ||
13608B | Micro-Knife, 20 0.12mm (0.005″) |
Each | € 99,10 | ||
13608C | Micro-Knife, 20 0.25mm (0.010″) |
Each | € 78,70 | ||
13608 | Micro-Knife, 20 0.50mm (0.020″) |
Each | € 68,20 | ||
13608D | Micro-Knife, 20 1.0mm (0.040″) |
Each | € 78,70 | ||
13609B | Micro-Knife, 45 0.12mm (0.005″) |
Each | € 99,10 | ||
13609C | Micro-Knife, 45 0.25mm (0.010″) |
Each | € 78,70 | ||
13609 | Micro-Knife, 45 0.50mm (0.020″) |
Each | € 68,20 | ||
13609D | Micro-Knife, 45 1.0mm (0.040″) |
Each | € 78,70 | ||
13630 | Micro-Mirror, reverse, St. St. 0.50mm (0.020″) |
Each | € 78,70 | ||
13633 | Micro-Prober, 90 0.25mm (0.010″) |
Each | € 76,30 | ||
13633A | Micro-Prober, 90 0.50mm (0.020″) |
Each | € 62,60 | ||
13612A | Micro-Prober, 45 0.25mm (0.010″) |
Each | € 73,40 | ||
13612 | Micro-Prober, 45 0.50mm (0.020″) |
Each | € 67,30 | ||
13611A | Micro-Engraver, oval, 0.025mm (0.001″) |
Each | € 120,00 | ||
13611B | Micro-Engraver, oval, 0.12mm (0.005″) |
Each | € 99,10 | ||
13611C | Micro-Engraver, oval, 0.25mm (0.010″) |
Each | € 78,70 | ||
13611 | Micro-Engraver, oval, 0.50mm (0.020″) |
Each | € 68,20 | ||
13611D | Micro-Engraver, oval, 1.0mm (0.040″) |
Each | € 78,70 | ||
13614 | Micro-Brush, single natural fiber, 0.50mm (0.020″) |
Each | € 68,20 | ||
13615A | Micro-Diamond Scribe, 60 0.25mm (0.010″) |
Each | € 114,30 | ||
13615 | Micro-Diamond Scribe, 60 0.50mm (0.020″) |
Each | € 80,70 | ||
13616 | Micro-Spatula, flexible, St. St. 0.50mm (0.020″) |
Each | € 80,70 | ||
13617 | Micro-Manipulator, A-type, 0.50mm (0.020″) |
Each | € 76,30 | ||
13618 | Micro-Hook, 90 0.25mm (0.010″) |
Each | € 80,20 | ||
13619 | Micro-Hook, 90 0.50mm (0.020″) |
Each | € 68,60 | ||
13620A | Micro-Hook, 180 0.25mm (0.010″) |
Each | € 78,70 | ||
13620 | Micro-Hook, 180 0.50mm (0.020″) |
Each | € 68,40 | ||
13613B | Micro-Scraper, triangular, 0.12mm (0.005″) |
Each | € 99,10 | ||
13613C | Micro-Scraper, triangular, 0.25mm (0.010″) |
Each | € 78,70 | ||
13613 | Micro-Scraper, triangular, 0.50mm (0.020″) |
Each | € 68,20 | ||
13613D | Micro-Scraper, triangular, 1.0mm (0.040″) |
Each | € 78,70 | ||
13622 | Micro-Saw, 0.50mm (0.020″) |
Each | € 68,20 | ||
13629 | Micro-Scale, 5mm with 0.1mm div., St. St., 050mm (0.020″) |
Each | € 110,50 | ||
13638 | Micro-Scale, 0.2″ with 0.005″ div, St. St., 050mm (0.020″) |
Each | € 108,60 | ||
13624A | Micro-Needle, short, 0.025mm (0.001″) |
Each | € 84,70 | ||
13624 | Micro-Needle, short, 0.12mm (0.005″) |
Each | € 80,70 | ||
13624B | Micro-Needle, short, 0.25mm (0.010″) |
Each | € 62,60 | ||
13624C | Micro-Needle, short, 0.50mm (0.020″) |
Each | € 45,00 | ||
13624D | Micro-Needle, short, 1.0mm (0.040″) |
Each | € 62,60 | ||
13625 | Ultra Micro-Needle, tungsten, straight, tip radius 5 m, 0.12mm (0.005″) |
Each | € 99,80 | ||
13625A | Ultra Micro-Needle, tungsten, straight, tip radius 5 m, 0.25mm (0.010″) |
Each | € 83,60 | ||
13625B | Ultra Micro-Needle, tungsten, straight, tip radius 5 m, 0.50mm (0.020″) |
Each | € 73,90 | ||
13626 | Ultra Micro-Needle, tungsten, 30 tip radius 5 m, 0.12mm (0.005″) |
Each | € 103,60 | ||
13626A | Ultra Micro-Needle, tungsten, 30 tip radius 5 m, 0.25mm (0.010″) |
Each | € 86,20 | ||
13626B | Ultra Micro-Needle, tungsten, 30 tip radius 5 m, 0.50mm (0.020″) |
Each | € 68,20 | ||
13627 | Ultra Micro-Needle, tungsten, 90 tip radius 5 m, 0.12mm (0.005″) |
Each | € 102,90 | ||
13627A | Ultra Micro-Needle, tungsten, 90 tip radius 5 m, 0.25mm (0.010″) |
Each | € 86,60 | ||
13627B | Ultra Micro-Needle, tungsten, 90 tip radius 5 m, 0.50mm (0.020″) |
Each | € 81,40 | ||
13628A | Micro-Scribe, carbide, tip radius 5 m, 0.12mm (0.005″) |
Each | € 105,80 | ||
13628B | Micro-Scribe, carbide, tip radius 5 m, 0.25mm (0.010″) |
Each | € 81,40 | ||
13628C | Micro-Scribe, carbide, tip radius 5 m, 0.50mm (0.020″) |
Each | € 69,90 | ||
13639A | Micro-Diamond File, round, 0.25mm (0.010″) |
Each | € 101,30 | ||
13639 | Micro-Diamond File, round, 0.50mm (0.020″) |
Each | € 84,70 | ||
13632 | Micro-Diamond File, triangular, 0.50mm (0.020″), triangle 1mm edge to edge |
Each | € 99,40 | ||
13631 | Micro-Loop, 2mm dia, 0.50mm (0.020″) |
Each | € 53,40 | ||
13634 | Micro-Hook, anti snag guard, 0.50mm (0.020″) |
Each | € 76,30 | ||
13637 | Micro-Burnisher, glass sphere, 0.50mm (0.020″) |
Each | € 59,40 |
Micro-Tools with interchangeable tips are available in hardened tool steel, stainless steel, and carbide for the cutting tools. Dedicated precision handles for each type of the Micro-Tools are available.
The tool handles have a practical hexagonal shape to prevent rolling of a flat surface. Micro-Tools are available in 32 different tip configurations mounted in an interchangeable tool base.
Many Micro-Tools with interchangeable tips are also available with shank sizes ranging from 0.025 to 1.0mm (0.001″ to 0.040″). Applications for these precision Micro-Tools extend to microscopy, specimen preparation and manipulation, micro-biology, micro-electronics, forensics and spectroscopy. All tools are especially useful for precision tasks involving probing, manipulating, marking, cutting, assembling and separating on a microscopic level.
Based on the design and craftsmanship used to manufacture the Micro-Tools there are also Small Precision Tools available with integrated handles and a fixed shank diameter (most 0.8mm).
The small precision tools mostly come in sets and deliver excellent value for less demanding applications.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
13671 | Micro-Needle, Long 0.12mm (0.005″), St. St. |
Each | € 93,40 | ||
13671A | Micro-Needle, Long, 0.25mm (0.010″), St. St. |
Each | € 77,80 | ||
13671B | Micro-Needle, Long, 0.40mm (0.016″), St. St. |
Each | € 76,30 | ||
13673 | Micro-Chisel, 0.12mm (0.005″), St. St. |
Each | € 107,10 | ||
13673A | Micro-Chisel, 0.25mm (0.010″), St. St. |
Each | € 87,30 | ||
13673B | Micro-Chisel, 0.40mm (0.016″), St. St. |
Each | € 70,30 | ||
13673C | Micro-Chisel, 0.50mm (0.020″), St. St. |
Each | € 84,70 | ||
13674 | Micro-Spade, 0.12mm (0.005″), St. St. |
Each | € 107,10 | ||
13674A | Micro-Spade, 0.25mm (0.010″), St. St. |
Each | € 87,30 | ||
13674B | Micro-Spade, 0.40mm (0.016″), St. St. |
Each | € 70,30 | ||
13676 | Micro-Mirror, forward, St. St., 0.50mm (0.020″), St. St. |
Each | € 77,60 | ||
13677 | Micro-Ruler, 10mm with 0.1mm div, 0.50mm (0.020″), St. St. |
Each | € 94,40 | ||
13678 | Micro-Knife, 20 , 0.12mm (0.005″), St. St. |
Each | € 107,10 | ||
13678B | Micro-Knife, 20 , 0.40mm (0.016″), St. St. |
Each | € 70,30 | ||
13678C | Micro-Knife, 20 , 0.50mm (0.020″), St. St. |
Each | € 81,30 | ||
13679 | Micro-Knife, 45 , 0.12mm (0.005″), St. St. |
Each | € 107,10 | ||
13679A | Micro-Knife, 45 , 0.25mm (0.010″), St. St. |
Each | € 87,30 | ||
13679B | Micro-Knife, 45 , 0.40mm (0.016″), St. St. |
Each | € 70,30 | ||
13680 | Micro-Mirror, reverse 0.50mm (0.020″), St. St. |
Each | € 72,10 | ||
13681A | Micro-Prober, 90 , 0.25mm (0.010″), St. St. |
Each | € 84,70 | ||
13681B | Micro-Prober, 90 , 0.40mm (0.016″), St. St. |
Each | € 70,30 | ||
13682A | Micro-Prober, 45 , 0.25mm (0.010″), St. St. |
Each | € 74,70 | ||
13682B | Micro-Prober, 45 , 0.40mm (0.016″), St. St. |
Each | € 66,60 | ||
13683 | Micro-Engraver, oval, 0.12mm (0.005″), St. St. |
Each | € 107,10 | ||
13683A | Micro-Engraver, oval, 0.25mm (0.010″), St. St. |
Each | € 87,30 | ||
13683B | Micro-Engraver, oval, 0.40mm (0.016″), St. St. |
Each | € 70,30 | ||
13685 | Micro-Diamond Scribe, 60 , 0.40mm (0.016″), St. St. |
Each | € 89,70 | ||
13686 | Micro-Spatula, flexible, St. St. 0.40mm (0.016″), St. St. |
Each | € 74,70 | ||
13688A | Micro-Hook, 90 , 0.25mm (0.010″), St. St. |
Each | € 87,30 | ||
13688B | Micro-Hook, 90 , 0.40mm (0.016″), St. St. |
Each | € 74,70 | ||
13684 | Micro-Scraper, triangular, 0.12mm (0.005″), St. St. |
Each | € 107,10 | ||
13684A | Micro-Scraper, triangular, 0.25mm (0.010″), St. St. |
Each | € 87,30 | ||
13684B | Micro-Scraper, triangular, 0.40mm (0.016″), St. St. |
Each | € 70,30 | ||
13687 | Micro-Scale, 5mm with 0.1mm div., 050mm (0.020″), St. St. |
Each | € 109,30 | ||
13690 | Micro-Scale, 0.2″ with 0.005″ div, 0.50mm (0.020″), St. St. |
Each | € 109,30 | ||
13689 | Micro-Needle, short, 0.12mm (0.005″), St. St. |
Each | € 104,80 | ||
13689A | Micro-Needle, short, 0.25mm (0.010″), St. St. |
Each | € 70,30 | ||
13689B | Micro-Needle, short, 0.40mm (0.016″), St. St. |
Each | € 53,90 | ||
13693 | Ultra Micro-Needle, 90 , tip radius 20 m, 0.50mm (0.020″), St. St. |
Each | € 61,80 | ||
13691 | Ultra Micro-Needle, straight, tip radius 20 m, 0.50mm (0.020″), St. St. |
Each | € 53,40 | ||
13692 | Ultra Micro-Needle, 30 , tip radius 20 m, 0.50mm (0.020″), St. St. |
Each | € 57,10 | ||
13696 | Micro-Hook, 0.3/1mm, Anti Snag Guard, 0.50mm, tip is tool steel/gold plated |
Each | € 82,40 |
Micro-Tool Standard Sets with Hardened Tool Steel Tips
The precision Micro-Tools with hardened tool steel are also available in standard sets for different applications, safely stored in a convenient hardwood case.
The Micro-Tools in the standard sets all have the 0.50mm (0.020″) shank size.
Each of the four available sets in the hardwood case includes the anodized aluminum handle and eight tips:
Included Tips | Shank Size | ||
---|---|---|---|
# Tip style | Micro-Tool | Description | 0.50mm |
1 | ![]() |
Micro-Needle, Long | 13601 |
3 | ![]() |
Micro-Chisel | 13603 |
8 | ![]() |
Micro-Knife, 20 | 13608 |
15 | ![]() |
Micro-Diamond Scribe, 60 | 13615 |
16 | ![]() |
Micro-Spatula, flexible, Stainless Steel | 13616 |
18 | ![]() |
Micro-Hook, 90 | 13618 |
23M | ![]() |
Micro-Scale, 5mm, 0.1mm divisions, Stainless Steel | 13623 |
25 | ![]() |
Ultra Micro-Needle, straight, 5 m radius tip, Tungsten | 13625 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
13610 | Microscopist Tool Set, complete, set |
Each | € 534,20 |
Micro-Tool Standard Sets with Hardened Tool Steel Tips
The precision Micro-Tools with hardened tool steel are also available in standard sets for different applications, safely stored in a convenient hardwood case.
The Micro-Tools in the standard sets all have the 0.50mm (0.020″) shank size.
Each of the four available sets in the hardwood case includes the anodized aluminum handle and eight tips:
Included Tips | Shank Size | ||||||
---|---|---|---|---|---|---|---|
# Tip style | Micro-Tool | Description | 0.50mm | ||||
1 | ![]() |
Micro-Needle, Long | 13601 | ||||
11 | ![]() |
Micro-Prober, 90 degrees | 13603 | ||||
12 | ![]() |
Micro-Prober, 45 degrees | 13608 | ||||
18 | ![]() |
Micro-Hook, 90 degrees | 13616 | ||||
20 | ![]() |
Micro-Hook, 180 degrees | 13618 | ||||
24 | ![]() |
Micro-Needle, short | 13623 | ||||
25 | ![]() |
Ultra Micro-Needle, straight, 5 m radius tip, Tungsten | 13625 | ||||
25 | ![]() |
Micro-Diamond Scribe, 60° | 13615 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
54458 | Micro-Needle Probe Tool Set, complete, set |
Each | € 499,00 |
Micro-Tool Standard Sets with Hardened Tool Steel Tips
The precision Micro-Tools with hardened tool steel are also available in standard sets for different applications, safely stored in a convenient hardwood case.
The Micro-Tools in the standard sets all have the 0.50mm (0.020″) shank size.
Each of the four available sets in the hardwood case includes the anodized aluminum handle and eight tips:
Micro-Tool Standard Sets with Hardened Tool Steel Tips
The precision Micro-Tools with hardened tool steel are also available in standard sets for different applications, safely stored in a convenient hardwood case.
The Micro-Tools in the standard sets all have the 0.50mm (0.020″) shank size.
Each of the four available sets in the hardwood case includes the anodized aluminum handle and eight tips:
Included Tips | Shank Size | ||
---|---|---|---|
# Tip style | Micro-Tool | Description | 0.50mm |
2 | ![]() |
Micro-Engraver, triangular | 13602 |
3 | ![]() |
Micro-Chisel | 13603 |
4 | ![]() |
Micro-Spade | 13604 |
8 | ![]() |
Micro-Knife, 20 | 13608 |
9 | ![]() |
Micro-Knife, 45 | 13609 |
13 | ![]() |
Micro-Engraver, oval | 13611 |
21 | ![]() |
Micro-Carbide Scribe, 5 m radius tip | 13613 |
28 | ![]() |
Micro-Scraper, triangular | 13628 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
54457 | Micro-Cutting Tool Set, complete, set |
Each | € 507,90 |
Micro-Tool Standard Sets with Hardened Tool Steel Tips
The precision Micro-Tools with hardened tool steel are also available in standard sets for different applications, safely stored in a convenient hardwood case.
The Micro-Tools in the standard sets all have the 0.50mm (0.020″) shank size.
Each of the four available sets in the hardwood case includes the anodized aluminum handle and eight tips:
Micro-Tool Standard Sets with Hardened Tool Steel Tips
The precision Micro-Tools with hardened tool steel are also available in standard sets for different applications, safely stored in a convenient hardwood case.
The Micro-Tools in the standard sets all have the 0.50mm (0.020″) shank size.
Each of the four available sets in the hardwood case includes the anodized aluminum handle and eight tips:
Included Tips | Shank Size | ||
---|---|---|---|
# Tip style | Micro-Tool | Description | 0.50mm |
5 | ![]() |
Micro-Fork | 13605 |
7 | ![]() |
Micro-Ruler, 10mm, 0.1mm div. | 13607 |
12 | ![]() |
Micro-Prober, 45 | 13612 |
14 | ![]() |
Micro-Brush, single natural fiber | 13614 |
16 | ![]() |
Micro-Spatula, flexible, Stainless Steel | 13616 |
17 | ![]() |
Micro-Manipulator, A-type | 13617 |
18 | ![]() |
Micro-Hook, 90 | 13619 |
25 | ![]() |
Ultra Micro-Needle, 30 5 m radius tip, Tungsten | 13625 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
54459 | Micro Placement and Manipulating Tool Set, complete, set |
Each | € 513,40 |