Products
Slotted Pin Stubs
Thin Specimen Split Mount on Pin Stub
12.7mm (1/2″) dia., 3.2mm (1/8″) dia. pin
pin length 8mm (.314″)
For examination of thin samples from textiles, plants, paper, plastics, metals, etc., in cross section.
Special wide opening up to 6.4mm (1/4″).
Grooved head.
Height of head is 7.4mm (0.29″).
Pin is centered.
Material: machined aluminum with stainless steel allen set screw.
Allen wrench included.
Screw used is 2-56 x 3/8, Hex, Set, Stainless Steel
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15330 | Thin Specimen Split Mount, 1/2″, 8mm L pin |
Each | € 52,00 |
Thin Specimen Split Mount (AMRAY)
15mm (0.59″) dia., 3.2mm (1/8″) dia. pin
pin length 14.3mm (9/16″)
Opens to 3.75mm (3/8″). Height of head is 10.2mm (0.4″) and split is centered.
Pin is off-center.
Material: machined aluminum with two stainless steel allen set screws.
Allen wrench included.
Screw used is 2-56 x 1/4 Hex Soc, Set, SS
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15331 | Thin Specimen Split Mount, AMRAY |
Each | € 62,90 |
Set Screw Vise
Single stainless steel set screw into an open slot that is 4mm (.157″) wide x 5mm (.197″) deep.
12.7mm (1/2″) dia. x 17.7mm (0.70″) high.
Material: machined aluminum with stainless steel allen set screw. 3.2mm (1/8″) dia. pin.
Allen wrench included.
Screw used is M3 x 6mm, Set, Stainless Steel
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16350 | Set Screw Vise, 12.7mm |
Each | € 33,70 |
Large Set Screw Vise
Set screw vise with an open slot of 10mm (.394″) wide x 5mm (0.197″) deep. 25mm (1″) x 17.5mm (0.69″) high.
Material: machined aluminum with stainless steel set screw. 3.2mm (1/8″) dia. Pin.
Allen wrench included.
Screws used are M3 x 6mm, Flat, Set, SS and M3 x 8mm, Flat, Set, SS
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15471 | Large Set Screw Vise, 25mm |
Each | € 47,80 |
Large Double Slotted Vise
Large Double Slotted Set Screw Vise with 2 ea. 2.5mm by 5mm deep slots.
Dimensions 25×8 mm (1 x 0.32″) with 3.2mm (1/8″) pin.
Clamp thin specimens and cross sections without the need for tape or conductive paint.
Material: machined aluminum with 2 stainless steel allen set screws.
Allen wrench included.d.
Screw used is M3 x 6mm, Flat, Set, SS
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16340 | Double Slotted Set Screw Vise, 15mm |
Each | € 34,60 |
Large Double Slotted Vise
Large Double Slotted Set Screw Vise with 2 ea. 2.5mm by 5mm deep slots.
Dimensions 25×8 mm (1 x 0.32″) with 3.2mm (1/8″) pin.
Clamp thin specimens and cross sections without the need for tape or conductive paint.
Material: machined aluminum with 2 stainless steel allen set screws.
Allen wrench included.d.
Screw used is M3 x 6mm, Flat, Set, SS
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15472 | Large Double Slotted Set Screw Vise, 25mm |
Each | € 48,10 |
Tube/Needle Clamp
Small tube, needle or wire clamp based on a standard 12.7mm (1/2″) pin stub.
Ideal for examining wire cross-sections or needle tips.
Holds tube, wires and needles up to 2mm (0.08″); hole is 6.5mm (1/4″) deep.
Material: vacuum grade aluminum with a stainless steel set screw.
Allen wrench included.
Screw used is 2-56 x 1/8, Set Cup, SS
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 15290 | Tube/Needle Clamp, 12.7mm, pin |
Each | € 39,60 |
