Products
Tilt Specimen Holders
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
Adjustable Profile Holder
Designed to adjust the exact angle for cross sections made from wafers.
Maximum specimen thickness 3.2mm (1/8″).
Material: machined aluminum with brass and stainless steel Allen set screw.
Allen wrench included.
Screws used are 4-40 x 1/2 socket head cap screw, stainless steel and 10-32 x 3/16 set screw, brass.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15356-4 | Hitachi Adjustable Profile Holder, M4 |
Each | € 172,10 | ||
15356 | PELCO Adjustable Profile holder |
Each | € 172,10 |
Compact Variable Tilt Mount
This Compact Variable Tilt Specimen Mount allows for easy mounting and tilting small samples from 0 – 90 and SEM investigation with small working distances.
Markings for 30 , 45 , 70 and 90 .
Table size is 11 x 14mm (0.46″ x 0.55″).
Overall size is 14 x 14.3 x 14.5mm (0.55″ x 0.56″ x 0.57″).
Made of aluminum with stainless steel screw.
Allen wrench included.
Screw used is M2 x 12mm, socket cap head screw, stainless steel.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15439 | Compact Variable Tilt Mount, M4 |
Each | € 89,20 |
Variable Tilt Specimen Holder for Pin Mounts
Accommodates specimens pin stubs up to 18mm (.7″) diameter or with a size up to 26 x 20mm.
Tilts 0 – 90 with 10 markings.
Additional markings for 30 , 45 , and 70 .
Tilt table size is 26 x 20mm, overall size is 33 x 20 x 19mm H.
Made of aluminum with stainless steel screws. Allen wrench included.
Screws used are M2 x 6mm, socket cap head screw, stainless steel and M2 x 3mm, set screw, stainless steel.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15450-4 | Variable Tilt Specimen Holder, M4 |
Each | € 396,70 |
Variable Tilt Specimen Holder for Hitachi M4 Mounts
Accommodates Hitachi 15mm cylinder mount with M4 thread.
Tilts 0 – 90 with 10 markings.
Additional markings for 30 , 45 , and 70 .
Tilt table size is 26 x 20mm, overall size is 33 x 20 x 19mm H.
Made of aluminum with stainless steel screws.
Allen wrench included.
Screws used are M2 x 6mm, socket head cap screw, stainless steel and M2 x 3mm, set screw, stainless steel.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15451-4 | Variable Tilt Specimen Holder for Hitachi M4 mounts, M4 |
Each | € 383,20 |
45 Pre-Tilt Holder for Hitachi Mounts and Pin Stubs
Accepts 15mm Hitachi mounts on pin with M4 thread.
Pin can be rotated and fixed for optimum position.
When the pin with M4 thread is removed, this holder also accepts a standard 12.7mm (1/2″) pin stub with 3.2mm (1/8″) pin. 45 gives higher SE signal w/o tilting the specimen stage.
Material: machined aluminum with stainless steel Allen set screw.
Allen wrench included.
Screw used is M3 x 3mm set screw, stainless steel.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15428-45 | 45 Pre-Tilt Holder, M4 |
Each | € 76,70 |