Products
Metallographic Mount Holders
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
Specimen holder for 1″ and 25mm metallographic mounts and other cylindrical 1 diameter samples.
Holder height is 0.33″ (8.4mm) with a recessed area 0.15″ (3.8mm) deep.
Open sides for easier sample removal.
Made of machined aluminum with two stainless steel Allen screws (M3 x 6mm and M3 x 12mm) and Allen wrench included.
Also shown on right holding a UHV-EL Reference Standard for EDS/WDS (not included).
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15603 | Specimen holder for 1″ and 25mm metallographic mounts and other cylindrical 1 diameter samples. |
Each | € 74,30 |
Specimen holder for 1-1/4″ and 30mm metallographic mounts and other cylindrical 1-1/4″ diameter samples.
Holder height is 0.33″ (8.4mm) with a recessed area 0.15″ (3.8mm) deep.
Open sides for easier sample removal.
Made of machined aluminum with two stainless steel Allen screws (M3 x 6mm and M3 x 12mm) and Allen wrench included.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15604 | Specimen holder for 30mm metallographic mounts and other cylindrical samples. |
Each | € 90,40 |
Specimen holder for 1-1/2″ and 40mm metallographic mounts and other cylindrical 1-1/2″ diameter samples.
Holder height is 0.33″ (8.4mm) with a recessed area 0.15″ (3.8mm) deep.
Open sides for easier sample removal.
Made of machined aluminum with two stainless steel Allen screws (M3 x 6mm and M3 x 12mm) and Allen wrench included.
Also shown on right holding a specimen (not included).
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15605 | Specimen holder for 40mm metallographic mounts and other cylindrical samples. |
Each | € 100,60 |
Spring-loaded specimen holder for single metallographic mounts 1″ to 1.5″ in diameter, and up to 0.5″ (12.7mm) thick.
Shown with, and without, an example of a mounted sample.
The sample is pressed to the cap by the spring, ensuring the polished face of the specimen is flat across the mount.
The removeable insert is used for 1″ samples and is removed for larger samples.
Ideal for wide area imaging, and stitching images with minimal focus change between stage moves.
M4 thread for Hitachi stage mount.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15481-4 | Top Referencing Holder for Single Met Mount, M4 |
Each | € 469,20 |
Dual spring-loaded specimen holder for two metallographic mounts 1″ to 1.5″ in diameter, and up to 0.5″ (12.7mm) thick.
The sample is pressed to the cap by the spring, ensuring the polished face of the specimen is flat across the mount.
The removeable insert is used for 1″ samples and is removed for larger samples. Ideal for wide area imaging, and stitching images with minimal focus change between stage moves.
Two locations for 12.7 mm pin stubs are included for mounting of analysis standards with the samples.
M4 thread for Hitachi stage mount.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15482-4 | Top Referencing Holder for Dual Met Mount, M4 |
Each | € 665,50 |
Spring-loaded specimen holder for four metallographic mounts 1″ to 1.5″ in diameter, and up to 0.5″ (12.7mm) thick.
The sample is pressed to the cap by the spring, ensuring the polished face of the specimen is flat across the mount.
The removeable insert is used for 1″ samples and is removed for larger samples. Four locations for 12.7 mm stubs are included for mounting of analysis standards with the samples.
Ideal for wide area imaging, and stitching images with minimal focus change between stage moves.
M4 thread for Hitachi stage mount.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15483-4 | Top Referencing Holder for Quad Met Mount, M4 |
Each | € 1.234,70 |
Cylinder Holder, 22mm (7/8″)
Specimen holder for cylinders up to 22mm (7/8″) diameter.
Made of aluminum with stainless steel allen screw.
Allen wrench included.
Screw used is M3 x 6mm socket head cap screw, stainless steel.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15402 | Specimen Holder for Cylinders up to 22mm (7/8″), M4 |
Each | € 62,90 |
Metallographic Mount Holder, 1″ or 25mm
Specimen holder for 1″ or 25mm metallographic mounts.
Made of aluminum with stainless steel allen screw.
Allen wrench included.
Screw used is M3 x 6mm socket head cap screw, stainless steel.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15403 | Metallographic Mount Holder, 1″ or 25mm, M4 |
Each | € 74,30 |
Metallographic Mount Holder, 1-1/4″ or 30mm
Specimen holder for 1-1/4″ or 30mm metallographic mounts.
Made of aluminum with stainless steel allen screw.
Allen wrench included.
Screws used are M3 x 6mm socket head cap screw, stainless steel and M3 x 12mm socket head cap screw. stainless steel.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15404 | Metallographic Mount Holder, 1-1/4″ or 32mm, M4 |
Each | € 88,40 |
Metallographic Mount Holder, 1-1/2″ or 40mm
Specimen holder for 1-1/2″ or 40mm metallographic mounts.
Made of aluminum with stainless steel allen screw.
Allen wrench included.
Screws used are M3 x 6mm socket head cap screw, stainless steel and M3 x 12mm socket head cap screw, stainless steel.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15405 | Metallographic Mount Holder, 1-1/2″ or 40mm, M4 |
Each | € 103,70 |
Metallographic Mount Holder, 2″ or 50mm
Specimen holder for 2″ or 50mm metallographic mounts.
Made of aluminum with stainless steel allen screw.
Allen wrench included.
Screws used are M3 x 6mm socket head cap screw, stainless steel and M3 x 12mm socket head cap screw, stainless steel.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
15406 | Metallographic Mount Holder, 2″ or 50mm, M4 |
Each | € 112,80 |