Products
Mount Storage Boxes
PELCO 18 SEM Pin Mount Storage Holder and Box
Versatile, cost effective SEM pin mount storage box and holder for pin mounts with a 3.2mm (1/8″) pin.
Numbered 1-18 with the spacing designed to accommodate all types of pin mounts with a diameter from 6.4 to 50mm.
Can hold 18 of 12.7mm pin mounts, 8 of 18mm pin mounts, 8 of 25mm pin mounts, 2 of 32 or 38 or 50mm pin mounts with space left for the smaller pin mounts.
Maximum specimen height between mount surface and closed lid is 16mm (5/8″).
Used for FEI/Philips, ZEISS/LEO/Leica, Cambridge CamScan, Tescan, Amray and ETEC SEMs.
Box inside dimensions are: 4-5/8″ x 2-2/4″ x 1-5/16″ (11.7 x 7.0 x 3.3cm).
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16709 | SEM Storage box and holder for up to 18 of 12.7mm pin mounts |
Each | € 14,00 |
PELCO X-TREME 18 SEM Pin Mount Storage Box with Holder
Very strong and rugged clear polycarbonate box to store standard pin mounts with 3.2mm (1/8″).
This box is watertight, crushproof and dustproof.
The strong hinges, locking clasps and soft silicone O-ring seal makes this an ideal transport, shipping and storage box for SEM samples on pin mounts.
The holder insert is numbered 1-18 and accommodates all types of pin mounts form 6.4 to 50mm diameter.
Same storage capacity as #16709.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16799 | PELCO X-TREME SEM Storage Box and holder for up to 18 of the 12.7mm SEM pin mounts |
Each | € 38,90 |
Plastic Box with SEM Pin Mount Specimen Holder
“Standard” plastic box with pin stub specimen holder. For 12.7mm (1/2″) SEM pin mounts with 3.2mm (1/8″) pins.
Box inside dimensions are: 2-7/8″ x 1-3/16″ x 3/4″ (7.3 x 3 x 1.9cm).
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16120 | Plastic Box, Standard, with Pin Mount Specimen Holder |
Each | € 3,50 |
Plastic Box with JEOL 12.2 and 12.5mm SEM Cylinder Mount Specimen Holder
The Standard plastic box with specimen holder.
This box is ideal for JEOL 12.2mm cylinder mounts and will hold 12.5mm dia, mounts but 12.5 fit will be very tight.
For 12.5mm diameter JEOL cylinder mounts.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16140 | Plastic Box, Standard, with Cylinder Mount Specimen Holder, 12.5mm dia. |
Each | € 7,70 |
Plastic Box for Tall Specimens with SEM Pin Mount Specimen Holder
“Tall” plastic box with SEM pin mount specimen holder.
Slip over retaining peg is included to keep holder in place if box is tipped or inverted.
For tall specimens on 12.7mm (1/2″) pin stubs with 3.2mm (1/8″) pin.
Box inside dimensions are: 2-7/8″ x 3/16″ x 1-1/4″ (7.3 x 3 x 3.2cm).
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16713 | Plastic Box “Tall” with Pin Mount Specimen Holder |
Each | € 3,70 |
Plastic Box for Tall Specimens with JEOL 12.2 and 12.5mm SEM Cylinder Mount Specimen Holder
“Tall” plastic box with specimen holder.
Slip over retaining peg is included to keep holder in place if box is tipped or inverted.
This box is ideal for JEOL 12.2mm cylinder mounts and will hold 12.5mm dia, mounts but 12.5 fit will be very tight.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16705 | Plastic Box “Tall” with Cylinder Mount Specimen Holder, 12.2 & 12.5mm dia. |
Each | € 8,10 |
Universal Specimen Holder with Tall Storage Box
Universal Specimen Holder with removable stand-off pin that keeps the holder in place if box is tipped or inverted in storage box.
- 2-sided use for double versatility
- accepts pin-type or cylinder mounts
- 12.7mm (1/2″) pin stubs with 3.2mm (1/8″) pin – holds 12, either side (FEI/Philips, ZEISS/LEO/Leica, Cambridge, CamScan, Tescan,
- Amray and ETEC SEM’s.)
- 9.5mm (3/8″) – holds 12 on one side (JEOL)
- 15mm mounts – holds 12 on one side (JEOL, ISI/ABT/Topcon)
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16160 | Universal Specimen Holder and Tall Storage Box, |
Each | € 5,50 |
PELCO 10 Hitachi SEM Mount Storage Holder and Box
Versatile storage box and holder for Hitachi SEM mounts with M4 threaded hole in the base.
Tapered plastic posts allow easy storage and retrieval. Numbered 1 10 to accommodate Hitachi mounts from 15 to 32mm diameter.
Can hold 10 of the 15mm mounts, 8 of the 25mm or 2 of the 32mm with enough space to place and remove the mounts.
Maximum specimen height for 6mm high Hitachi SEM mounts is 15mm with closed lid.
Box inside dimensions are: 4-5/8″ x 2-2/4″ x 1-5/16″ (11.7 x 7.0 x 3.3cm)
Replaces the #16718 Storage Box
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16791 | PELCO SEM Storage box and holder for 10 Hitachi SEM Mounts |
Each | € 14,60 |
PELCO X-TREME 10 Hitachi SEM Mount Storage Box with Holder
Very strong and rugged clear polycarbonate box to store standard Hitachi SEM mounts with M4 threaded hole in the base.
This box is watertight, crushproof and dustproof.
The strong hinges, locking clasps and soft silicone O-ring seal makes this an ideal transport, shipping and storage box for SEM samples on pin mounts.
The holder insert is numbered 1-10 and accommodates Hitachi SEM mounts from 15-32 mm diameter.
Same storage capacity as #16791.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16795 | PELCO X-TREME SEM Storage Box and Holder for 10 Hitachi SEM Mounts |
Each | € 38,80 |
Hitachi SEM Mount Storage Box with M4 Screws
for Hitachi scanning electron microscopy specimen mounts
This storage box accepts threaded Hitachi Mounts.
Holds either 12 each of 15mm or 6 each of 25mm mounts.
Insert in base of the box has 12 M4 screws.
Maximum specimen height for 6mm high Hitachi SEM mounts is 12mm with closed lid.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16712 | 15/25mm Hitachi Mount Holder, metal screws and Box |
Each | € 21,10 |
SEM Pin Mount Specimen Holder and Box
Specimen holder and box for storing up to 8 of 12.7mm pin mounts ( 3.2mm – 1/8″ pin), used in FEI/Philips, ZEISS/LEO/Leica, Cambridge, CamScan, Tescan, Amray and ETEC SEM’s.
Inside box dimensions are: 4-1/2″ x 1-3/4″ x 1-1/8″ (11.4 x 4.4 x 2.9cm).
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16716 | Plastic Box/Holder for 8 of 12.7mm dia. pin mounts |
Each | € 20,40 |
14 SEM Pin Mount Specimen Holder and Box
Storage Box and Holder for 14 of 12.7mm dia. or 8 of 25mm pin mounts ( 3.2mm – 1/8″ pin).
Numbered 1 – 14.
Used for FEI/Philips, ZEISS/LEO/Leica, Cambridge, CamScan, Tescan, Amray and ETEC SEM’s.
Inside box dimensions are: 4-5/8″ x 2-7/8″ x 1-1/4″ (11.7 x 7.3 x 3.2cm).
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16717 | Plastic Box/Holder for 14 of 12.7mm dia. pin mounts |
Each | € 40,40 |
Single Pin Mount Storage Tube and Mailer tube for SEM specimen pin mounts
Pin mounts with the standard 3.2mm (1/8″) pin diameter are protected and held securely in the base (cap) of the tube.
Can be used for pin mounts up to 18mm diameter.
Pin mounts are sold separately.
Inside dimension of clear tube: 21mm (0.83″), max sample height on stub is 20mm (0.79″).
Outside dimensions are 23mm (0.9″) with a height of 52mm (2.05″).
Clear tube is made of polystyrene, cap is made of low density polyethylene (LDPE).
Sold in packs of 10.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16630 | Single Mount Storage Tube and Mailer |
10 | € 7,40 |
Single Hitachi M4 Mount Storage Tube and Mailer tube for SEM specimen Hitachi M4 mounts
A 15mm diameter, M4 threaded Hitachi mount can be protected and held securely in the cap (base) of the tube on a M4 screw.
Suitable for 15mm Hitachi Mounts. Hitachi Mounts are sold separately.
Inside dimension of clear tube: 21mm (0.83″), max sample height on stub is 20mm (0.79″).
Outside dimensions are 23mm (0.9″) with a height of 52mm (2.05″).
Clear tube is made of polystyrene, cap is made of low density polyethylene (LDPE).
Sold in packs of 10.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16630-4 | Single Hitachi Mount Storage Tube and Mailer, M4 |
10 | € 23,50 |
Large Single Pin Mount Storage Tube and Mailer tube for large SEM specimen pin mounts
Large pin mounts with the standard 3.2mm (1/8″) pin diameter are protected and held securely in the base (cap) of the tube.
Can be used for pin mounts up to 38mm diameter.
Pin mounts are sold separately.
Inside dimension of clear tube: 39mm (1.53″), max sample height on stub is 30mm (1.18″).
Outside dimensions are 40mm (1.57″) with a height of 75mm (2.95″).
Clear tube is made of polystyrene, cap is made of low density polyethylene (LDPE).
Sold in packs of 10.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16630-L | Large Single Pin Mount Storage Tube and Mailer |
10 | € 56,50 |
SEM-STOR Paper Box Storage for Pin Mounts
inexpensive storage for scanning electron microscopy mounts
Fold-up insert which accepts 8 specimen mounts: 12.7mm (1/2″) head, 3.2mm (1/8″) pin.
Shipped flat.
7cm long x 3.8cm wide x 3.5cm high (2-3/4″ x 1-1/2″ x 1-3/8″).
Pin mounts are not included.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16612 | SEM-STOR Paper Box |
100 | € 135,40 |
PELCO Wooden Storage Box for 154 Pin Mounts
Sturdy wooden box with a clear, resilient finish inside and out.
Nickel plated latch and hinges additional durability.
This box provides storage for up to 154 of 12.7mm (1/2″) pin mounts.
There is a storage map in the lid and mount pins are held in place by perforated rubber foam attached to the bottom.
Outside dimensions are 24.8 x 19.7 x 5.2cm (9.75″ x 7.75″ x 2.06″).
Inside dimensions are 22.9 x 17.8 x 2.8cm [above foam] (9″ x 7″ x 1.1″ [above foam]).
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16714 | PELCO Wooden Box for 154 of 12.5 dia. pin mounts |
Each | € 133,40 |
PELCO Plastic Storage Box for 135 pin mounts
Clear styrene hinged storage box with closed cell rubber foam which holds up to 135 of 12.7mm (1/2″) pin mounts.
Foam is glued to the base of the box.
Complete with latched and hinged lid.
There is a storage map provided with the box.
Internal dimensions are 267 x 157 mm ( 10-1/2″ x 6-3/16″) with a maximum sample height of 24mm (15/16″) on the pin stub.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16770 | PELCO Plastic Storage Box for 135 of 12.5 dia. pin mounts |
Each | € 66,80 |
PELCO Storage Cabinet for SEM Pin Mounts
This robust plastic 5 drawer cabinet stores up to 1300 standard 12.7mm (1/2″) pin mounts in 5 drawers.
Each drawer features a removable clear polypropylene box with hinged lid and latches so you can take that box to the SEM or preparation station for specimen transfer.
The pin mounts are held in closed cell rubber foam which is glued to the bottom of the box.
Each box in the drawer holds 260 standard 12.7mm (1/2″) pin mounts.
The lids on the box minimize moisture and dust affecting the contents.
A storage map is provided with each drawer/box.
The PELCO pin mount storage cabinet can also be used to store larger diameter pin mounts (up to 100mm/4″) or for pin type specimen holders with a maximum height of 32mm (1-1/4″).
The cabinets are made of sturdy and non-corrosive high density polyethylene, the drawers and clear boxes are made from impact polypropylene.
The PELCO 5 drawer pin mount storage cabinets are stackable with interlocking grooves.
Outside dimensions of the cabinet are W15-1/2″ x D14-1/2″ x H16″ (39.5×37.8×40.6cm).
The internal dimension of the boxes in the drawers are 13-1/8″ x 8-7/8″ (33.3×22.5cm) with a maximum specimen height of 1-1/4″ (32mm).
The clear plastic boxes are also separately available.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16760 | PELCO 5 Drawer Storage Cabinet for SEM Pin Mounts, complete with 5 ea. Style 16760-10 |
Each | € 405,80 | ||
| 16760-10 | PELCO Plastic Storage Box for 260 Pin Mounts |
Each | € 87,50 | ||
| 16760-20 | PELCO Replacement foam insert for Style 16760-10 |
Each | € 50,60 |
PELCO TEM Grid Vacuum Desiccator
This robust PELCO TEM Grid Vacuum Desiccator holds up to 50 TEM grids in the grid box with a rotary lid with a slot hole to prevent the rest of the grids from falling out.
Storage under vacuum eliminates contamination or dust and is ideal to preserve hygroscopic samples.
The use of durable, non-outgassing, black anodized aluminum and silicon O-rings makes it suitable for pumping down to 10-3 mbar.
Capable of holding vacuum for many months.
Metal vacuum valve with PTFE shaft seal. Use a small vacuum pump to evacuate.
Vacuum connection for pump-down is a 1/4″ (6.35mm) barb fitting.
- Keeps TEM samples and calibration standards contamination free
- Prevents oxidization of sensitive samples
- Holds up to 50 TEM grids secured under lid
- Acrylic disc for visibility
- Ideal for storing, transporting and shipping.
- Overall size w/o vacuum valve is 76 x 35mm (3″ x 1.4″).
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16178 | PELCO TEM Grid Vacuum Desiccator |
Each | € 374,90 |
PELCO SEM Pin Stub Vacuum Desiccator
The durable and versatile PELCO SEM Pin Stub Vacuum Desiccator holds up to 12 standard 12.7mm (1/2″) pin stubs, or two 25mm (1″) or 1 up to 50mm (2″) SEM pin stubs.
Storage under vacuum eliminates contamination or dust. Allows for a 10mm (3/8″) specimen height on the pin stubs.
The use of durable, non-outgassing, blue anodized aluminum and Silicon O-rings makes it suitable for pumping down to 10-3 mbar.
Capable of holding vacuum for many weeks.
Metal vacuum valve with PTFE shaft seal.
Use a small vacuum pump to evacuate. Vacuum connection for pump-down is a 1/4″ (6.35mm) barb fitting.
- Keeps samples and calibration standards contamination free
- Prevents oxidization of sensitive samples
- Holds pin mounts secure with O-rings
- Acrylic clear disc for easy locating of samples
- Ideal for storing, transporting and shipping samples and calibration standards
Overall size w/o vacuum valve is 76 x 35mm (3″ x 1.4″).
Cavity height is 13.7mm (0.54″).
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16179 | PELCO SEM Pin Stub Vacuum Desiccator |
Each | € 348,80 | ||
| 16179-4 | PELCO Vacuum Desiccator for Hitachi M4 Sample Mounts |
Each | € 402,80 |
Small Dust Cover
Convenient for temporary benchtop storage of in-process samples. The clear cover is made of ABS plastic and the blue base is made of high impact polystyrene plastic. Shown with Multi Pin Stub Holder #15413 and various pin stubs, available separately
Dimensions:
Total height with lid on: 7.1cm (2.8″)
Base diameter: 10.2cm (4″)
Inner tray diameter: 8.1cm (3.2″)
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 16777 | Small Dust Cover |
Each | € 18,70 |
