Products
Accessories and Replacements
Capsule Preparation Station
This Preparation Station is a capsule loading platform to maintain cleanliness from epon liquid spillovers from the above Microwave Capsule Holder 36131-2.
This pre-loading station avoids a potential situation of water contamination in the microwave polymerization procedure.
The 36131-6 permits the technician/scientist to pre-load 00 capsules.
Capsules are then transferred to 36131-2 for the polymerization step in the microwave.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 36131-6 | Capsule Preparation Station |
Each | € 222,30 |
PELCO Microwave Microcentrifuge Tube Holder
Made from PTFE, designed to hold 18 conventional polyethylene microcentrifuge tubes.
Firmly holds tubes in water bath or on PELCO ColdSpot Pro during processing.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 36134 | PELCO Microwave Microcentrifuge Tubes PTFE Holder |
Each | € 75,80 |
1.5ml Microcentrifuge Tubes, Clear
The 1.5ml microcentrifuge tubes are manufactured from polypropylene and able to be autoclaved.
These tubes are also microwave transparent.
The tubes feature a frosted label area for sample identification and volume graduations of 0.1, 0.5, 1.0 and 1.5ml.
The microcentrifuge tubes have a snap cap for secure closure but are also syringe pierceable.
These microcentrifuge tubes offer convenience and versatility for various utilizations in histology, immunology and scientific research.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 20836 | Microcentrifuge Tubes, 1.5ml, Clear, Polypropylene |
Each | € 10,30 | ||
| 20838 | Microcentrifuge Tubes, 1.5ml, Clear, Polypropylene |
Each | € 25,90 |
PELCO Microwave Capsule Holder with Lid
The improved PELCO Microwave Capsule Holder has three design features that set it apart from the previous design.
- “Stops” on the legs to keep the capsule base level during loading
- A hole with a stop in the base to allow the 00 embedding capsule to be set in place easily
- The new capture top that has a recess to keep the embedding capsule lid in place throughout the polymerization process in the microwave
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 36131-2 | PELCO Microwave Capsule Holder with Lid |
Each | € 283,30 |
1.5ml Microcentrifuge Tubes, Black
The 1.5ml microcentrifuge tubes are composed of polypropylene and are completely autoclavable as well as microwave transparent.
The opaque black provides protection for light sensitive samples.
The microcentrifuge tubes offer a frosted label area for writing or moisture resistant labels.
The tubes contain volume graduations of 0.1, 0.5, 1.0 and 1.5mls.
The tight-fitting snap cap offers convenience and safety in storage as well as a syringe-pierceable alternative.
These microcentrifuge tubes provide versatility and convenience in many facets of histology, immunology and scientific research.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 20836-B | Microcentrifuge Tubes, 1.5ml, Black, Polypropylene |
100 | € 13,20 |
| Microwave Resin Polymerization System
Designed for resin polymerization using the 36131 or 36131-2 Capsule Holders in the PELCO BioWave Microwave Tissue Processor During microwave-assisted resin polymerization the microwave polymerization system is placed on the Microwave Polymerization Stand on the PELCO ColdSpot Pro. The insulator pad is placed on the surface of the water and the lid placed on the tray. This new system controls the rate of heating and the temperature maximum (100 C) without the loss of water during the polymerization process. Microwave wattage will control the heating rate which ensures a quality polymerization each run. |
|||
 |
 |
||
| Microwave Polymerization System shown with the Polymerization Stand (36133-20) and PELCO Microwave Capsule Holder (36131-2) on the PELCO ColdSpot Pro (36116-10) |
Microwave Polymerization Stand (36133-20) | ||
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 36133 | Microwave Polymerization System |
Each | € 48,10 | ||
| 36133-10 | Replacement Insulator Pads, 1/2″ thick |
3 | € 20,90 |
Polypropylene Petri Dishes
Polypropylene Petri Dishes are microwave transparent and sturdy.
These dishes can be coupled with the PELCO Prep-Eze holders for microwave processing.
Bottom inside dimensions: 50mm dia. x 12mm deep
Lid inside dimensions: 56mm dia. x 10mm deep
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 36135 | Polypropylene Petri Dishes, 50mm ID x 12mm, pk/100 |
Each | € 48,10 | ||
| 36135-5 | Polypropylene Petri Dishes, 50mm ID x 12mm, pk/500 |
Each | € 213,50 |
1.5ml Microcentrifuge Tubes, Assorted Colors
These 1.5 ml microcentrifuge tubes in assorted colors consist of polypropylene, are microwave transparent and autoclavable.
The frosted label provides are for specimen identification.
The tubes are labeled in graduated volumes of 0.1, 0.5, 1.0 and 1.5 ml.
The tight-fitting snap cap offers secure closure and syringe insertion ability.
The assorted colors of the 1.5 ml microcentrifuge tubes provide assistance in organization and reference for multiple samples.
These tubes offer versatility in specimen handling in histology, immunology and scientific research.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 20840 | Assorted Colors, Microcentrifuge Tubes |
Each | € 79,20 |
Temperature Restrictive Temperature Probe with PTFE Coating
This PTFE-coated probe is supplied with the PELCO BioWave Pro+ and is a replacement probe for all the previous PELCO Microwave systems.
It is used to monitor and/or maintain preset temperature maximums during microwave processing.
The temperature probe is accurate to 1 C (from 0 C to 100 C) and will maintain 1 C in water and most fixative solutions.
The 10cm probe is protected with a PTFE coating for decalcification and special stain applications.
It has a 40cm long lead and is designed to fit into Product No. 36138 PTFE Probe Stand.
This stand has a 12cm long arm that can be adjusted up and down over an 18cm range to allow precise location of the probe into processing vessels or a container.
The Product No. 3536 PELCO EM Microwave Vacuum Chamber is also designed for use with this temperature probe.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 36145-T | Temperature Restrictive Temperature Probe with PTFE Coating |
Each | € 187,90 | ||
| 36138 | PTFE Temperature Probe Stand |
Each | € 70,30 |
