Products
Electron Microscopy Kit
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
Consisting of:
The PELCO ColdSpot® Pro
The PELCO ColdSpot® Pro is designed for control of the environment inside the PELCO BioWave® Pro and Pro+ microwave systems.
The water within the PECLO ColdSpot® Pro circulates through the internal Load Cooler within the BioWave® system or through the external PELCO SteadyTemp™ Pro chiller.
This provides consistent temperature control at the specimen level as well as eliminating the standing wave pattern within the microwave cavity.
PELCO® EM Pro Microwave Vacuum Chamber
The PELCO® EM Pro Vacuum Chamber is made from microwave-transparent polypropylene and designed to reach a maximum vacuum of 20" of Hg.
The PELCO® EM Pro Vacuum Chamber works in conjunction with the internal vacuum pump in the PELCO BioWave® Pro and Pro+ microwave systems.
The vacuum chamber can run a continuous vacuum or utilize a vacuum cycle, depending on the application and need of the user.
Capsule Preparation Station
The Capsule Preparation Station is designed for the size 00 embedding capsules as an aid for filling and orientation for polymerization. The prep station is made from polypropylene that allows for easy resin clean-up.
PELCO® Prep-Eze™
The PELCO Prep-Eze™ specimen holders are designed for microwave processing. The sturdy PTFE design is offered in 6-well and 12-well configurations.
Each kit contains a specimen holder, ID mat for each design, and a set of polypropylene petri dishes.
Microwave Polymerization System
The Microwave Polymerization System contains all the components necessary for polymerization of resin within the BioWave® Pro and Pro+ microwave systems.
The Microwave Polymerization System is compatible with epoxy and LR White resins.
PELCO® Microwave Microcentrifuge Tubes PTFE Holder
PELCO® Microwave Microcentrifuge Tube Holder in PTFE is designed for use in the PELCO BioWave® Pro and Pro+ microwave systems.
The holder can accommodate 18, 1.5ml microcentrifuge tubes.
Electron Microscopy
This kit provides a full range of accessories designed for efficient EM processing in the microwave, enabling complete process from fixation to resin.
| Art. | Description | Unit | Price | Quantity | |
|---|---|---|---|---|---|
| 36500-10 | Electron Microscopy Tissue Processing Application Kit for use with the PELCO BioWave Pro |
Each | € 2.953,70 |
