Products
Laboratory Tape
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
Autoclave Resistant Tape for Thermal-Transfer Printers
Autoclave Resistant Tape is designed for use with high pressure steam autoclaves and dry heat sterilization. The Autoclave Resistant Tape is ideally suited for sterilizing surgical instruments and trays, containers, bags, double-blister packs, metal surfaces, plasticware and glassware.
These items may be sterilized by steam autoclaves and dry heat ovens. The tape may be exposed to gamma irradiation or ethylene oxide gas sterilization.
This white printable tape is supplied as a continuous roll, allowing the user to cut the tape manually or with the cutting feature of the printer if available.
Available with a core that is 25.4mm x 15m and a core that is 25.4mm x 30m with a 6mm tab on the left side of the tape roll.
Permanent adhesive backing.
Features:
- Withstands sterilization by steam autoclaves, dry heat ovens, gamma irradiators and ethylene oxide exposure
- Printable with all major thermal-transfer barcode printers
- Accepts writing with permanent markers
Use RR-Class (smudge and alcohol proof) resin ribbons for thermal transfer printers.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
22321-3 | Autoclave Resistant Tape for Thermal-Transfer Printers, 76mm Core, 25.4mm x 30M |
Each | € 135,80 | ||
22321-2 | Autoclave Resistant Tape for Thermal-Transfer Printers, Core, 25.4mm x 15m |
Each | € 71,90 |
Steam Sterilization Indicator Tape
Designed to identify containers that will undergo sterilization in steam autoclaves, this white autoclave tape comes with nearly invisible marking strips that will turn black when put through a sterilization cycle. Steam Sterilization Tape is used to confirm that the labeled material has been autoclaved.
The tape is available in two sizes: 18mm x 54M (0.7″ x 180′) and 25mm x 54M (1″ x 180′).
Features:
- Withstands sterilization by steam autoclaves and dry heat ovens
- Uses unique color-changing stripes to indicate whether autoclave cycle has been completed
- Allows user the choice of how much or little tape to cut from the continuous roll
- Accepts writing with permanent markers
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
22321 | Steam Autoclave Tape 18mm x 54m |
Each | € 44,40 |
Cryogenic NitroTAPE
temperature range from -196 °C to +100 °C
NitroTAPE is a permanent cryogenic tape for plastic and glass vials, microtubes, cryo and freezer boxes, plastic bags and other containers.
Intended for long-term specimen preservation in liquid phase and vapor phase liquid nitrogen (-196 C), laboratory freezers (-20 C, -70 C, -80 C, -120 C) and dry ice (-78.5 C).
Waterproof and wear and tear proof. It resists multiple freeze-thaw cycles and is ideal for dry-ice transportation.
It also withstands boiling water (5 min at +100 C) and Gamma irradiations (up to 50KGy, tested).
Weatherproof, it is also perfect for exterior use.
Supplied in a continuous roll format with a support liner, on 1″ core. Comes with a side tab and underscore for easy removal.
Printable with all major brands of thermal-transfer barcode printers (Zebra, SATO, CAB, Printronix, Datamax-O Neil, Intermec, etc.).
Also accepts writing with permanent markers such as Cryo-Marker.
Where alcohol-resistance is required, printing with alcohol-proof resin ribbons is recommended.
Ideal for use in biological, biomedical, biopharmaceutical research, clinical labs, biorepositories, cell and tissue banks, and in other specimen bio preservation laboratories. Ideal for hard to label applications where a reliable long-term adhesion to cryogenic is critical.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
22316 | Cryogenic Tape, 19mm, White |
15m | € 45,00 | ||
22316-1 | Cryogenic Tape, Roll, Yellow |
15m | € 42,90 | ||
22316-2 | Cryogenic Tape, Roll, Blue |
15m | € 42,90 | ||
22316-3 | Cryogenic Tape, Roll, Orange |
15m | € 42,90 |
Cryogenic Tape for Frozen Containers
temperature range from -196 °C to +100 °C
Cryogenic tape for identification of already frozen vials, tubes, freezer boxes, plastic bags and other containers.
Designed for long term bio preservation in liquid phase and vapor phase liquid nitrogen and ultra-low temperature freezers.
Not recommended for incubation in water baths and solvents.
Overlap for best performance.
19mm x 15m
Permanent and transparent.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
22316-4 | Cryogenic Tape, 19mm x 15M, Roll, white Transparent |
15m | € 55,80 |
Cryo-Laminate Cryogenic Lamination Tapes
temperature range from -196 °C to +80 °C
Ultra-thin laminate provides excellent protection against most chemicals and reagents.
Can be used for long-term storage in liquid and vapor phase liquid nitrogen or ultra-low temperature freezers.
Resistant to dry ice, boiling water, multiple freeze-thaw cycles and other harsh laboratory environments.
Permanent and transparent.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
22319-1 | Cryo-Laminate™ Cryogenic Lamination Tape, 19mm, Roll, white Transparent |
15m | € 59,10 | ||
22319-2 | Cryo-Laminate™ Cryogenic Lamination Tape, 25mm, Roll, white Transparent |
60m | € 75,20 | ||
22319-3 | Cryo-Laminate™ Cryogenic Lamination Tape, 50.8mm, Roll, white Transparent |
60m | € 87,70 |
C-KurTAPE Cryo Tamper-Evident Tape
temperature range from -196 °C to +110 °C
Continuous tamper-evident tape for sealing containers and other items.
Will tear into pieces upon attempt to remove.
Ideal for cryogenic storage in liquid nitrogen, freezers and dry ice.
Waterproof.
Can be printed with all major brands of thermal transfer printers.
Permanent.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
22320-1 | C-KurTAPE™ Cryo Tamper-Evident Tape, 22.2mm, Roll, white Green |
15m | € 50,10 | ||
22320-2 | C-KurTAPE™ Cryo Tamper-Evident Tape, 22.2mm, Roll, white Silver |
15m | € 50,10 | ||
22320-3 | C-KurTAPE™ Cryo Tamper-Evident Tape, 22.2mm, Roll, white Yellow |
15m | € 50,10 | ||
22320-4 | C-KurTAPE™ Cryo Tamper-Evident Tape, 22.2mm, Roll, white Green |
15m | € 50,10 | ||
22320-5 | C-KurTAPE™ Cryo Tamper-Evident Tape, 22.2mm, Roll, white Blue |
15m | € 50,10 | ||
22320-6 | C-KurTAPE™ Cryo Tamper-Evident Tape, 22.2mm, Roll, white Orange |
15m | € 50,10 | ||
22320-7 | C-KurTAPE™ Cryo Tamper-Evident Tape, 22.2mm, Roll, white Red |
15m | € 50,10 |
Laboratory Tape
High-quality, versatile general purpose color tape ideal for a range of applications.
This self-adhesive impregnated paper tape is water proof, oil proof and acid resistant.
It adheres to virtually any clean and dry surface and peels off easily, leaving no residue.
It also accepts writing from virtually any kind of pencils, pens and markers.
This multi-purpose tape will withstand temperatures from -40 °C to +110 °C, and has an application temperature as low as 0 C.
It is available in a width of 13mm in 4 colors and can fit into laboratory or standard 3″ tape dispensers.
Ideal for applications such as color coding, labeling, sealing, and more.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
22317 | Laboratory Tape, 13mm White |
55m | € 21,10 | ||
22317-1 | Laboratory Tape, 13mm, Roll, Yellow |
55m | € 21,10 | ||
22317-2 | Laboratory Tape, 13mm, Roll, Blue |
55m | € 21,10 | ||
22317-3 | Laboratory Tape, 13mm, Roll, Orange |
55m | € 19,50 |
Heavy Duty Metal Frame Multi-Roll Tape Dispensers Three models available with total dispensing widths of 1″, 2″ and 3″Ideal for laboratory use.Can hold 0.25″ to 3″ wide tapes, with 3″ cores, with up to 180′ or more in length. Multi-roll construction allows storage of various colors and sizes of tapes on the same dispenser.Ergonomic design allows easy and rapid changes of rolls. Slip-resistant base and small footprint. Integrated cutter allows easy and clean cutting. Wave-cutting blade is covered under a protective plastic shield to reduce the risk of injury.Metal powder coating meets RoHS standards. |
||
![]() |
![]() |
![]() |
1″ Tape Dispenser (22318-1) |
2″ Tape Dispenser (22318-2) |
3″ Tape Dispenser (22318-3) |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
22318-1 | Tape Dispenser, 1″ (25.4mm) Wide |
Each | € 100,00 | ||
22318-2 | Tape Dispenser, 2″ (50.8mm) Wide |
Each | € 98,40 | ||
22318-3 | Tape Dispenser, 3″ (76.2mm) Wide |
Each | € 125,10 |