Products
SynapTek™ Grids
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
PELCO SynapTek™ grids have been developed to give perfect stability for coating with a support film. These TEM grids are extremely sturdy, easy to clean, contamination free and reusable after cleaning.
With a thickness of 100µm (4 mil) (except Mo, which has a thickness of 75µm (3 mil)) and a diameter of 3.05mm, PELCO Synaptek™ grids are available with a standard oval 1x2mm slot.
For higher yields, there are also versions available with a 0.5x2mm slot, a 0.8×1.8mm slot and a 1.5mm diameter hole.
The standard material for the Synaptek™ grids is a beryllium copper alloy, however for special applications Nickel, Molybdenum or gilded (gold plated) versions are also available.
The PELCO Synaptek™ TEM grids have special identification and handling features with some features combined.
Supplied in vial/100, except molybdenum which is supplied in a vial/25.
DOT: One side of the grid is marked with two square dots for clear identification, visible to the unaided eye
NUM: A number between 0-99 stamped on one side of the grids (instead of the dots) for identification. Numbers are in random orders and may be duplicated.
NOTCH: An indentation stamped on one side of the grid to enable easy handling by tweezers.


4510
DOT
1 x 2mm slot

4512
NUM
1 x 2mm slot

4514
NOTCH
1 x 2mm slot

4516
NOTCH-DOT
1 x 2mm slot

4518
NOTCH-NUM
1 x 2mm slot

4506
GILDED NOTCH-NUM
1 x 2mm slot

4509
NOTCH-DOT
0.8 x 1.8mm slot

4517
Ni-NOTCH-DOT
1 x 2mm slot

4519
DOT
1.5mm hole

4507
Ni-DOT
1.5mm hole
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
4510 | PELCO SynapTek™ DOT Grids, 1 x 2mm slot, Beryllium-Copper |
100 | € 331,70 | ||
4512 | PELCO SynapTek™ NUM Grids, 1 x 2mm slot, Beryllium-Copper |
100 | € 88,00 | ||
4514 | PELCO SynapTek™ NOTCH Grids, 1 x 2mm slot, Beryllium-Copper |
100 | € 110,90 | ||
4516 | PELCO SynapTek™ NOTCH-DOT Grids, 1 x 2mm slot, Beryllium-Copper |
100 | € 88,00 | ||
4518 | PELCO SynapTek™ NOTCH-NUM Grids, 1 x 2mm slot, Beryllium-Copper |
100 | € 110,90 | ||
4506 | PELCO SynapTek™ GILDED NOTCH-NUM Grids, 1 x 2mm slot, Beryllium-Copper, Gold Plated |
100 | € 155,20 | ||
4511 | PELCO SynapTek™ DOT Grids, 0.5 x 2mm slot, Beryllium-Copper |
100 | € 42,90 | ||
4509 | PELCO SynapTek™ NOTCH-DOT Grids, 0.8 x 1.8mm slot, Beryllium-Copper |
100 | € 46,00 | ||
4517 | PELCO SynapTek™ Ni-NOTCH-DOT Grids, 1 x 2mm slot, Nickel |
100 | € 146,60 | ||
4519 | PELCO SynapTek™DOT Grids, 1.5mm hole, Beryllium-Copper |
100 | € 88,00 | ||
4507 | PELCO SynapTek™ Ni-DOT Grids, 1.5mm hole, Nickel |
100 | € 56,20 | ||
4508 | PELCO SynapTek™ Mo-DOT Grids, 1.5mm hole, Molybdenum, Thickness of 75 m (3 mil) |
25 | € 65,30 |
PELCO SynapTek GridStick
staining and storage for EM
An inexpensive device to reduce or eliminate precipitate and dirt from your electron microscopy grids during staining.
The PELCO SynapTek GridStick is manufactured from a thin but rigid alloy that does not react with commonly used organic solvents and stains.
The stick is 4mm wide by 75mm long and has a slot along its center with small undercut notches on one side to make grid removal simple.
A small area on top of each stick is reserved for identification (use a fine point permanent ink pen).
The PELCO SynapTek GridStick is coated with a specially formulated pressure-sensitive adhesive.
This adhesive holds the grids in place during staining, emulsion coating, carbon coating, shadow casting and serial section collection.
The PELCO SynapTek GridStick will fit into conventional Pasteur pipettes.
The grids lie in the same plane as the solution flow, minimizing chances of breaking Formvar films and collecting surface debris.
The PELCO SynapTek GridStick was developed in conjunction with PELCO SynapTek Grids.
Other grids may be used provided they have sufficient thickness to avoid bending when being removed from the adhesive on the PELCO SynapTek GridStick.
PELCO SynapTek Grids are 100 m thick.
![]() ![]() |
Inset: fully loaded PELCO SynapTek GridStick with 1 x 2mm PELCO Synaptek Grids. |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
155-7 | Staining Pipettes with 2 flow limiting plugs |
20 | € 294,30 | ||
155 | PELCO Synaptek GridStick™ Kit |
Each | € 381,50 | ||
155-5 | PELCO Synaptek GridSticks™ (uncoated) |
10 | € 21,00 |
Technical Note
![]() |
Technical Note |
[pdf-embedder url=”https://localhost/loeneninstruments/wp-content/uploads/2022/05/155-9-TN-V2-01082004.pdf” title=”155-9 TN V2 01082004″]
MSDS
![]() |
Download Material Safety Data Shee |
[pdf-embedder url=”https://localhost/loeneninstruments/wp-content/uploads/2019/08/155-9_sds.pdf”]
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
155-9 | GridStick Adhesive |
5ml | € 18,40 |