Skip to content
+ 31 (0)75 614 90 40
info@loeneninstruments.com
Contact
  • Log In | Log Out
  • Register
  • Account details
  • Log In | Log Out
  • Register
  • Account details
€ 0,00 0 Cart
×
  • Accessories for Microscopy
  • Instruments
  • Accessories for Microscopy
  • Instruments
Home / Accessories for Microscopy / Grids / TEM Grids / Gilder TEM Grids

Products

Gilder TEM Grids

  • Adhesives
    • Conductive
    • Mounting Adhesives
    • Non Conductive
      • Non Conductive
      • Tapes
    • Tabs, Tapes & Sheets
  • AFM & SPM
    • AFM-STM Supplies
    • Colloids & Nanoparticles
      • Gold and Silica Shell Gold Colloid
      • Highly Uniform Gold Particles
      • Silver Colloids & Nanoparticles
    • Substrates
  • Apertures
    • Apertures 1,85 x 0,1mm
    • Apertures 2,0 x 0,1mm
    • Apertures 2,0 x 0,25mm
    • Apertures 2,0 x 0,6mm
    • Apertures 3,0 x 0,1mm
    • Apertures 3,0 x 0,25mm
    • Apertures 3,04 x 0,25mm
    • Apertures 4,0 x 0,2mm
    • Apertures 4,0 x 0,6mm
    • Apertures 6.35 x 0.02mm
    • Apertures 6,35 x 0,125mm
    • Apertures 10,0 x 0,1mm
    • Apertures 10,0 x 0,6mm
    • Apertures 12,0 x 0,1mm
    • Apertures 19,99 x 0,25mm
    • Gilded strip apertures
    • Multihole Strip Apertures
    • Spray Apertures
    • Thin Foil Apertures
    • Tantalum Wehnelt
    • Top Hat Apertures
    • Aperture Cleaning
  • Brushes
  • Calibration
    • AFM Calibration
      • AFM Gold Calibration Kit
      • AFM-SPM calibration
      • High Resolution Calibration
      • MRS-3
      • MRS-4
      • MRS-6
      • Test Gratings
      • Very High Resolution Calibration
    • Calibration Calculators
    • EDS/WDS/EPMA/XPS
      • NiOx Test Specimen
      • Pelco Faraday Cup
      • UHV-EL Reference Standards
      • X-Ray References Calibration
      • XCS EDS Calibration
    • GSR & Particle Analysis
    • Light Microscopy
      • LM Calibration Standards
      • Stage Micrometers
      • Stage Micrometers Pro Series
    • SEM Calibration
      • (CD) Calibration Test
      • Back Scattered Electron Test
      • Boron substrates
      • Chessy test specimen
      • Critical Dimension Magnification Standards
        • CDMS
        • CDMS ISO
        • CDMS-XY
        • CDMS-XY ISO
        • Etched Si CDMS
        • Etched Si CDMS-XY
        • Etched Si CDMS ISO
        • EEtched Si CDMS-XY ISO
      • Demonstration Specimens
      • Glass size standards
      • Gold on Carbon
      • Gold Spheres on Carbon
      • Line/Grid Standards
      • Low & Medium Magnification
      • MRS-3
      • MRS-4
      • MRS-6
      • Multi Calibration Standard
      • Polystyrene Spheres
      • Silicon test specimen
      • Tin on Carbon
    • TEM Calibration
      • Astigmatism Correction
      • Calibration Test Kit
      • Lattice Plane Resolution Checks
      • MAG*I*CAL
      • TEM/STEM Test Specimens
  • Chemicals
    • Buffers
    • Citifluor
    • De- and rehydrating agents
    • Embedding
      • Embedding Components
      • Embedding kits
      • Mountants
    • Fixatives
    • Stains
      • Stains for EM
      • Stains for LM
  • Cleaning
    • Anti-Static Products
    • Applicator, Sticks & Swabs
    • Cleaning Brushes
    • Cleaning Detergents
    • Lab Bench Cover, Spill Tray
    • Polishing Compounds
    • Pressurized Cleaners
    • ProPette
    • Skin Protectants
    • Spill Response Kits
    • Ultrasonic Cleaners
    • Wipes, Cloths and Tissues
  • Cryo Products
    • Cryo Accessories
    • Cryo Embedding
    • Cryo Gloves & Aprons
      • Cryo Aprons
      • Cryo Gloves
      • Waterproof Cryo Gloves
    • Cryo Pucks
    • Cryo Storage
    • Dewar Flasks
      • Bio Series
      • Enamelled steel
      • High Capacity
      • Low Form, Wide Neck
      • Stainless Steel
    • Eyelashes
    • Laboratory Tape
    • UltrAuFoil® Holey Gold Films
    • Vitrobot Consumables
  • Desiccators Cabinets
    • Acrylic
    • Black Desiccator Cabinets
    • Desiccant
    • Desiccator Accessories
    • Large Capacity
    • Small
    • Vacuum Desiccators
  • Diamond Knives
    • AFM
    • Cryo 35 Wet-Dry
    • Cryo 45° Wet – Dry
    • Cryo Immuno
    • Cryotrim
    • Histo
    • Histo Cryo Wet – Dry
    • Histo Jumbo
    • Ultra 35°
    • Ultra 45°
    • Ultra Sonic
    • Diamond Knife Cleaning
  • Dissection
    • Blades
    • Bone Cutters
    • Bone Saws
    • Brain and Biopsy Punches
    • Elevators & Dissectors
    • Forceps
      • Aesculap® Forceps
      • General Purpose
      • LED Forceps and Scissors
      • Locking Forceps
    • Scalpels
    • Scissors
      • Aesculap®
      • General Lab
      • General Purpose
      • Micro Scissors
  • Embedding
    • ACLAR® Film
    • Beem® Products
      • BEEM® Capsules
      • BEEM® Storage
    • Castable Embedding Supplies
    • Critical Point Dryer Accessories
    • Disposable Molds
    • Embedding Cassettes
    • Embedding Media
    • Embedding Molds
    • Gelatin Capsules
    • Multi- and Flexible Molds
    • PELCO Locator Molds
    • Syringes & Pipettes
  • FIB Supplies
    • Grid & Sample Holders
    • Omniprobe Supplies
    • PELCO FIB Lift-Out Grids
      • Carb-N-Grids
      • PELCO® Indicator FIB Lift-Out TEM Grids
      • PELCO® FIB Lift-Out TEM Grids
  • Filaments
    • Denka M-3 LaB6 Cathodes
    • Kimball LaB6 Cathodes
    • SEM/TEM Filaments
  • Forensics
    • Carbon Tweezers
    • Forensic Supplies
    • GSR Calibration Kit
  • General Lab Supplies
    • Applicator, Sticks and Swabs
    • Beakers, Cylinders and Containers
    • Cell Strainer System
    • Dishes and Boats
    • Glass Bottom Dishes
    • Laboratory Glassware
    • Laboratory Tongs
    • Microscopy Illuminators
    • Microwave Specimen Holders
    • Parafilm M®, Melinex Film
    • PELCO Rotators
      • R1 Single Speed Rotator
      • R2 Variable Speed Rotator
      • R2 Rotator with Heads with Clips for Test Tubes
    • Petri Dishes
    • Pocket Scales
    • Spatulas & Spoons
    • Storage Jars, Containers & Bottles
      • Bottle Top Dispensers
      • Diamond RealSeal™ Bottles
      • Plastic Carboys
      • RealSeal™ Plastic Bottles
      • Vials and Bottles
    • Thermometers
    • Timers
    • Ultraviolet Lamps
    • Vials, Tubes and Cups
    • Wire Mesh
  • Gloves
    • Gloves for Cryo Applications
    • Laboratory Gloves
  • Grids
    • Grid Staining Matrix System
    • SEM Grids
    • TEM Grids
      • Agar Grids
      • Athene TEM Grids
      • Gilder TEM Grids
      • Grid Coating
      • Grid Holder Blocks
      • Maxtaform™ Grids
      • Pelco Special Metal Grids
      • Pelco TEM Grids
      • QUANTIFOIL® TEM Substrates
      • Reference/Finder Grids
      • Special TEM Grids
      • Staining Pads
      • StrataTek™ TEM Grids
      • SynapTek™ Grids
      • Veco Grids
    • TEM Support Films
      • Carbon
      • Formvar
      • Formvar Carbon
      • Graphene
        • Graphene Oxide Films
        • Graphene TEM
      • Holey Carbon
      • Holey Silicon Nitride
      • Lacey Films
      • Si3N4 Support Film for CLEM
      • Silicon Aperture Frames
      • Silicon Nitride Support Films
      • Silicon Nitride X-Ray Windows
      • UltrAuFoil® Holey Gold Films
  • Histology
    • Citifluor Antifadent
    • Cleaning Products
    • Cryo Sectioning & Storage
      • Cryo Embedding Media
      • Cryo Label Systems
      • Cryo Storage systems
      • Tissue Marking Dyes
    • Embedding & Sectioning
      • Disposable Histology Molds
      • Laboratory Label Systems
      • Mold Kits
      • PAP Pens
    • Glass Bottom Dishes
    • Gross Dissection Tools
      • Dissection Tools
      • LED Forceps and Scissors
      • Tissue Slicing Systems
    • Grossing & Processing
      • Beakers, Cylinders and Containers
      • Blades
      • Embedding Cassettes
      • Marking Pens
      • Mortar & Pestle Sets
      • Vials, Tubes and Cups
    • Histology Instruments
      • CellTec Activated Carbon Filters
      • Hotplates and Centrifuges
      • Magnetic Stirrers
      • Manual Rotary Microtome
      • Paraffin Dispenser, trimmers
      • PELCO BioWave Pro+
      • Pocket Scales
      • Slide Dryers
      • Slide Warmers
      • Thermometers
      • Tissue Section Bath
      • Tissue Slicing
        • SliceMaster
        • TruSlice Digital
        • TruSlice TruSlice Manual
      • Water Baths
    • Immersion Oils
    • Laboratory Tape
    • Microscope Slides
      • Glass Microscope Slides
      • Large Slides
      • Plastic Microscope Slides
      • Quartz Slides and Coverslips
    • Pipettes and Pipettors
      • ali-Q 2 Pipette Controllers
      • Ovation® Pipettes
      • ProPette™ LE Single Channel Pipettors
      • Wobble-Not Pipettes
      • Pipettor Racks
      • Reagent Reservoirs
      • Pipettes tips
        • Universal Pipette tips
        • VistaLab Pipette Tips
      • Plastic Pasteur Pipettes
    • PTFE Laboratory Products
    • Razor- Microtome Blades
    • Safety Products
    • Slide Boxes, Trays & Mailers
    • Slide Labels
    • Spatulas and Spoons
    • Staining
      • Containers with Lid
      • Mounting Media
      • Slide DrainRack
      • Slide Staining System
      • Staining Jars & Racks
      • Vials, Tubes and Cups
    • Weighing Dishes
  • Magnifiers
    • 3D Stereo Glasses
    • Headband Magnifiers
    • Illuminated Magnifiers
    • Magnifier with Table Clamp
    • Magnifying Glass
    • Measuring Magnifiers
    • Photo and Film Magnifiers
    • Pocket Magnifiers
    • Pocket Microscope
    • Reticles
    • Surgical Loupes
  • Material Science
    • Compression Mounting Supplies
    • Crucibles
    • Cutting Fluids
    • Epoxy Mount Kits
    • Metallographic Accessories
    • Mounting Clips
    • PELCO Mounting Waxes
    • PELCO Pressure Pot
    • Personel Safety
    • Photonic Cleaning Solutions
    • Plastic & Silicone Molds
    • Polishing & Grinding
      • Colloidal Silica Suspensions
      • Diamond Compounds & Pastes
      • Diamond Suspensions
      • PELCO Lapping Discs
      • Lapping Fixtures
      • Polishing Cloths
      • Polishing Compounds
      • Polishing Powders
      • Silicon Carbide Discs
      • Tripod Polisher
    • Sample Clamp
    • Sectioning
      • Low Speed Diamond Saw
      • Wafering Blades
    • Storage Cabinet
  • Microwave Processing
    • PELCO BioWave Pro+
    • BioWave application Kits
      • Electron Microscopy Kit
      • Immunolabeling Kit
      • Paraffin Tissue Processing Kit
      • Decalcification Kit
    • Microwave Accessoires<
      • Accessories and Replacements
      • Equipment
      • Processing
      • Staining
      • Vacuum
  • Nanotechnology
    • Antibody Gold Conjugates
    • Calibration
      • AFM Calibration
        • (CD) Calibration Test
        • AFM Gold Calibration Kit
        • AFM-SPM calibration
        • AFM, STM, SPM Calibration
        • MRS-3
        • MRS-4
        • MRS-6
      • Microanalysis
        • Pelco Faraday Cup
        • GSR & Particle Analysis
        • NiOx Test Specimen
        • X-Ray References Calibration
      • Performance Testing
        • Back Scattered Electron Test
        • Demonstration Specimens
        • Low & Medium Magnification
      • Resolution Standards
        • AuSome™ Resolution Test
        • Gold on Carbon
        • Low & Medium Magnification
        • Tin on Carbon
      • SEM Calibration
        • 2D Holographic Array
        • Critical Dimension (CD)
        • Critical Dimension Magnification
          • CDMS
          • CDMS-XY
          • CDMS ISO
          • CDMS-XY ISO
          • Etched Si CDMS
          • Etched Si CDMS-XY
          • Etched Si CDMS ISO
          • Etched Si CDMS-XY ISO
        • High Resolution Calibration
        • Line/Grid Standards
    • Coated TEM Grids
      • Carbon
      • Formvar
      • Formvar Carbon
      • Graphene Films
        • Graphene Oxide Films
        • Graphene Support Films
      • Holey Carbon
      • Lacey Carbon
      • Silicon Aperture Frames
      • Substratek Metallic Substrates
    • Gold and Silica Shell Gold Colloid
    • Gold Nanoarrays
    • Negative Stains
    • Substrates
  • Neuroscience
    • Animal Research
      • Animal Identification
      • Small Animal Research
    • Black Plastic Products
    • Blades
    • Brain and Tissue Matrices
      • Acrylic
      • Chrome coated
      • Spinal cord
      • Stainless Steel
      • Tumor Matrices
    • Citifluor Solutions
    • Diamond Microtome Knives
      • AFM
      • Cryo 35 Wet-Dry
      • Cryo 45° Wet – Dry
      • Cryo Immuno
      • Cryotrim
      • Histo
      • Ultra 35°
      • Ultra 45°
      • Ultra Sonic
    • Embedding Cassettes
    • Glass Bottom Dishes
    • Instruments
      • Centrifuges
      • McIlwain Tissue Chopper
      • MicroSlicers
      • PELCO easiSlicer
      • PELCO Rotators
        • R1 Single Speed Rotator
        • R2 Variable Speed Rotator
        • R2 Rotator with Heads with Clips for Test Tubes
      • SliceMasters
      • Sterilizers
      • Stirrers
    • Microscope Slides
      • Microscope Slides Glass
      • Microscope Slides Large
      • Microscope Slides Plastic
      • Microscope Slides Quartz
    • PAP Liquid Blocker Pens
    • PTFE Products
    • Slide Boxes
    • Specimen Holders
    • Staining Jars & Racks
    • Tools for Neuroscience
      • Biopsy Punches
      • Dissection Tools
      • Ear Punches
      • Locking Forceps
      • Needles, Picks & Probes
      • Scalpels
      • Scissors
        • Aesculap
        • High Quality
        • LED Forceps and Scissors
        • Micro Scissors
        • PELCO Scissors
      • Spatulas and Spoons
      • Surgical Bone Cutters
      • Wound Clips
  • Photographic Material
  • Scissors
    • Aesculap
    • General Lab
    • High Quality
    • LED Forceps and Scissors
    • Micro Scissors
    • PELCO Scissors
  • Sectioning
    • Microtome Blades
    • Sapphire Knife
    • Sectioning Supplies
    • Tungsten Carbide Knife
  • SEM Supplies
    • Carbon tabs, tapes & sheets
    • Mount Storage Boxes
    • Planchets
    • Replication Materials
    • Scintillators
    • Specimen Mount Grippers
    • Specimen Preparation Stations
    • Starter Kits
    • Stubs, Mounts and Holders
      • M4 Threaded, Cylinder, and Other Stubs
        • Bulk Specimen Holders, M4
        • Carbon Planchet Holders, M4
        • Carbon, Brass, and Copper Mounts
        • Cross Section Holders
        • Cylinder Specimen Mounts
        • E-Beam Lithography Mount, M4
        • EBSD Pre-tilt Holders & Mounts, M4
        • Filter Holders, M4
        • Flat Sample Clip Holders
        • Hitachi T-base Specimen Holders
        • Metallographic Mount Holders
        • Modular Stage Adapters, M4
        • Mount Adapters, M4
        • Multipurpose Specimen Holder
        • Pin Stub Holders, M4
        • Q Pin Mounts and Holders
        • Rectangular Mounts
        • SEMClamp Holders, M4
        • SEMClip Cylinder Mounts
        • SEMClip Geological
        • STEM Imaging Holder, M4
        • TEM Grid Holder, M4
        • Tilt Specimen Holders
        • Vise Type Holders
        • Wafer & Large Sample Holders
      • Pin Stubs Specimen Mounts and Holders
        • Adapter Buttons
        • Angled Pin Stub Holders
        • Bulk Specimen Holders with Pin
        • Carbon, Brass, and Copper, SEM Mounts
        • E-Beam Lithography Mount
        • EBSD Pre-tilt Holders & Mounts
        • FIB Grid Holders
        • Filter Holders, Pin
        • Jeol Specimen Holders
        • Low Profile FIB Mounts
        • Low Profile SEMClip
        • Metallographic Mount Holders
        • Modular Stage Adapters
        • Mount Adapters
        • Multi Purpose / Bulk Holders
        • Multi-Pin Stub Holders
        • Pin Stub Specimen mounts
        • Planchet Holders
        • Q Pin Stubs and Holders
        • Sample Holder Sets
        • SEMClamp Holders
        • SEMClip Pin Mounts
        • Slotted Pin Stubs
        • STEM Imaging Holder
        • TEM Grid Holders
        • Thin Section Holders
        • Variable Tilt Holders
        • Vise Clamp Holders
        • Wafer Holders with Pin
  • Slides, Coverslips, Storage
    • Microscope Slides Coverslips
    • Microscope Slides Glass
    • Microscope Slides Large
    • Plastic Microscope Slides
    • Microscope Slides Quartz
    • Slide boxes & Trays
  • Sputter Targets
  • Substrates
  • Tabs, Tapes & Sheets
  • TEM Supplies
    • Dissection Supplies
    • Embedding Supplies
      • ACLAR Film
      • Beem Products
        • BEEM Capsules
        • BEEM® Storage
        • Disposable Molds
        • Embedding molds
        • Microcentrifuge Tubes
        • Multi and Flexible Molds
        • Snap-Fit Gelatin Capsules
        • Syringes and Pipettes
      • Eyelashes, Brushes
      • Glass Knives & Accessories
      • Instruments
        • Cryo Chamber
        • Heat Pen
        • PELCO easiGlow
        • PELCO Rotators
          • Single Speed Rotator, R1
          • Variable Speed Rotator, R2
          • Rotator with Heads with Clips for Test Tubes
        • Tissue Processor
      • K-kit for Liquid TEM
      • Loops and Wire
      • Petri Dishes
      • Replication Materials
      • Specimen Holders
      • TEM Checker
      • TEM Grid Boxes
      • Test Specimens
      • Vials and Cube Racks
      • Wheaton Vials
    • Tools
      • Bench Vises
      • Calipers and Micrometers
      • Diamond Scribing Tools
      • Foils
      • Laboratory Lubricants
      • Micro-Tools
        • Measuring Scales
        • Micro Tools - Carbide Tips
        • Micro Tools - Steel Tips
        • Micro Tools - Stainless Steel Tips
        • Technician Sets
      • Needles, Probes & Picks
      • Plastic Pliers
      • Pliers & Side Cutters
      • Screwdrivers and Hex Keys
      • Scribing and Cleaving Kits
      • Workbench Tools
    • Transport & Storage
      • Cabinets for Tissue Cassettes
      • Cardboard, Tin Boxes & Cans
      • Gel-Pak® Substrate Carriers
      • Grid Storage Boxes
      • Compact Modular Cabinet
      • Plastic Jars, Containers & Bottles
      • Membrane Boxes
      • Plastic Storage Boxes
      • Slide Boxes, Trays and Mailers
      • Mount Storage Boxes
      • Wafer Carrier Trays
      • PELCO X-TREME Cases
      • Zipper, Barrier Bags
    • Tweezers
      • Accessories
      • Aesculap® – Forceps
      • Aquarius Tweezers
      • Cantilever Tweezers
      • Carbon Fibre tweezers
      • Dumont™ Tweezers
        • Anti-Capillary
        • Biology
        • Clamping Ring
        • Dumostar
        • Electronic
        • High Precision
        • Manipulating Tweezers
        • Medical
        • Self Closing
        • Titanium
      • General Purpose Forceps
      • Industrial, Economy Tweezers
      • Mount Grippers
      • PELCO Tweezers
        • Biology
        • Ceramic Tips
        • Clean Room Tweezers
        • DLC Coated
        • Economy Tweezers
        • ESD Safe Epoxy Coated
        • ESD Ergonomic
        • Flat and Pad Tips
        • General Purpose
        • Gold Plated
        • High Precision
        • Locking Tweezers
        • Mini
        • PTFE Coated
        • Reverse (self closing)
        • Slim
        • Soft Tips
        • Superalloy, UltraFine Tips
        • Titanium
      • Plastic Tipped ESD Tweezers
      • Plastic Tweezers, Flat & Sharp
      • Plastic, Wafer Tip Styles
      • Surgical Tissue Forceps
      • Wafer Tweezers
      • Wafer, Component, Cover Glass
      • Wire Cutting Tweezers
      • Zirconia Ceramic Tweezers
    • Vacuum Coating
      • Carbon Rods and Wire
      • Evaporation Wire & Pallets
      • Metal Boats
      • Substrates
      • Tungsten Filaments and Coils
      • Tungsten Wire Baskets
    • Vacuum Handling Tools
      • Vacuum Pick-Up Systems
      • Wafer Handling
    • Vacuum Pumps & Supplies
      • Exhaust Filters
      • Vacuum Gauges
      • Vacuum Grease & Sealants
      • Vacuum Pump Oils
      • Vacuum Pumps
        • Diaphragm Vacuum Pump
        • RVP Series Dual Stage Rotary Vane Vacuum Pumps
        • VRI Series Compact
        • VRP Series Heavy Duty

    for Transmission Electron Microscopy

    The Gilder grids are available in 50 to an unrivalled ultra fine 2000 mesh.

    The Gilder grids feature well defined grid bars, shiny (smooth) and matt side difference and are packaged in custom anti-static vials.

    They are made with precision electroplating technologies. An additional feature of the Gilder grids are the rim and center marks to aid in the orientation on the grid and identification of each side.

    Most Gilder grids have a rim mark and many grids also have center marks. Wide selection of grid styles to support virtually every application with standard diameter of 3.05mm.

    Available materials are Cu, Ni, Au, Mo and Cu/Pd. Thickness of Nickel grids is typically 35µm ±5µm.

    Packaging:

    • Standard Cu, Ni or Cu/Pd, 100 grids/vial except special configurations which are listed accordingly with packaging of 25 or 50 grids/vial.
    • Thickness of Nickel grids is typically 35µm ±5µm.
    • Thickness of Mo grids is typically 25µm – 50µm.
    • Molybdenum is used principally in applications where its hardness, expansion coefficient, high temperature and corrosive resistance characteristics are considered important.
    • Mo typical purity 99.9%, melting point 2617° C (4742.6°F).

    Standard Mesh Grids with marks: An asymmetrical mark in the rim, shown top. Center mark for quadrant location or older style, “reverse arrow”, bottom.

    Fine Mesh Grids with marks: An asymmetrical mark in the rim, shown top. Center mark divides grid into 6 areas, bottom.

    Specifications
    Rim Width:300-500µm
    Thickness:Square Mesh 6-25µm Hex 10-25µm Parallel Bar 12-27µm Slot 25-60µm Aperture 25-50µm
    Diameter:3.05mm
    Packaging:100 grids/vial for standard Cu, or Ni grids 50 grids/vial for Au 25 grids/vial for Mo 25/15/10 grids/vial for ultra fine mesh
    Pitch:Is 1″/mesh or 25.4mm/mesh Example 200 mesh pitch = 25.4/200 = 127µm
    MaterialCode
    CopperG or GC
    NickelGN
    GoldGG /G-G, or G-AU
    Copper/PalladiumG-CUPD
    MolybdenumG-M
    From the drawing above, the hole and bar widths are shown.
    Sometimes “pitch” is used in this terminology and it is the equivalent of hole width plus bar width.
    Square MeshPitch µm
    (3)
    Hole Width µm
    (1)
    Bar Width µm
    ((2)
    % Trans- missionMark
    CenterRim
    G505004208070––
    G753402855566••
    G1002502054567••
    G100HEX2502203077––
    G1501651254045••
    G150HEX1651303562–•
    G200125903552••
    G200HEX1251052070––
    G200HH1251131282–•
    G200HS1251131282–•
    G30083582549••
    G300HS83731077–•
    G300HEX83582549–•
    G300HH83731077–•
    G40062372537••
    G400HS6254876–•
    G400HEX62372536–•
    G400HH5749874••
    G400P62402265–•
    G600TT–3010/16–•–
    G600HH3729861••
    G600HHS4237578–•
    G600HSS4237578–•
    G1000HS2519657–•
    G1000HH2519657–•
    G1500HS16.511.5549–•
    G1500HH16.510640–•
    G2000HS12.57.5536–•
    G2000HA12.56.56541–•
    Loading...
    Product
    Order
    Product

    Gilder 50 Mesh Grids
    G50: Pitch 500 m; Hole Width 420 m; Bar Width 80 m; Transmission 70%
    no. G50 and G50N

    Order

    Art.Description Unit PriceQuantity
    G50

    Gilder Grids, 50 mesh, 3.05mm O.D., Copper

    100 € 36,70
    ✓
    spinner
    G50N

    Gilder Grids, 50 mesh, 3.05mm O.D., Nickel

    100 € 52,80
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 75 Mesh Grids
    no. G75 to G75CUPD

    Order

    Art.Description Unit PriceQuantity
    G75

    Gilder Grids, 75 mesh, 3.05mm O.D., Center and Rim-Mark, Copper

    100 € 34,70
    ✓
    spinner
    G75N

    Gilder Grids, 75 mesh, 3.05mm O.D., Center and Rim-Mark, Nickel

    100 € 43,00
    ✓
    spinner
    G75G

    Gilder Grids, 75 mesh, 3.05mm O.D., Center and Rim-Mark, Gold

    50 € 133,50
    ✓
    spinner
    G75CUPD

    Gilder Grids, 75 mesh, 3.05mm O.D., Center and Rim-Mark, Cu/Pd Palladium Coated Copper Grids

    100 € 52,80
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 100 Mesh Grids
    no. G100 to G100M

    Order

    Art.Description Unit PriceQuantity
    G100

    Gilder Grids, 100 mesh, 3.05mm O.D., Center and Rim-Mark, Copper

    100 € 39,50
    ✓
    spinner
    G100CUPD

    Gilder Grids, 100 mesh, 3.05mm O.D., Center and Rim-Mark, Cu/Pd Palladium Coated Copper Grids

    100 € 67,90
    ✓
    spinner
    G100N

    Gilder Grids, 100 mesh, 3.05mm O.D., Center and Rim-Mark, Nickel

    100 € 57,60
    ✓
    spinner
    G100M

    Gilder Grids, 100 mesh, 3.05mm O.D., Molybdenum, Center and Rim-Mark

    25 € 144,80
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 150 Mesh Grids
    no. G150 to G150N

    Order

    Art.Description Unit PriceQuantity
    G150

    Gilder Grids, 150 mesh, 3.05mm O.D., Center and Rim-Mark, Copper

    100 € 48,80
    ✓
    spinner
    G150CUPD

    Gilder Grids, 150 mesh, 3.05mm O.D., Center and Rim-Mark, Cu/Pd Palladium Coated Copper Grids

    100 € 54,10
    ✓
    spinner
    G150N

    Gilder Grids, 150 mesh, 3.05mm O.D., Center and Rim-Mark, Nickel

    100 € 70,00
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 200 Mesh Grids
    no. G200 to G200N

    Order

    Art.Description Unit PriceQuantity
    G200

    Gilder Grids, 200 mesh, 3.05mm O.D., Center and Rim-Mark, Copper

    100 € 47,10
    ✓
    spinner
    G200N

    Gilder Grids, 200 mesh, 3.05mm O.D., Center and Rim-Mark, Nickel

    100 € 49,90
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 200 Mesh Grids, Fine Bar
    no. G200HS to G200M

    Order

    Art.Description Unit PriceQuantity
    G200HS

    Gilder Fine Bar Grids, 200 mesh, 3.05 O.D., Rim-Tab, Rim-Mark, Copper

    100 € 66,00
    ✓
    spinner
    G200HSN

    Gilder Fine Bar Grids, 200 mesh, 3.05 O.D., Rim-Tab, Rim-Mark, Nickel

    100 € 74,80
    ✓
    spinner
    G200HSG

    Gilder Fine Bar Grids, 200 mesh, 3.05 O.D., Rim-Tab, Rim-Mark, Gold

    50 € 87,20
    ✓
    spinner
    G200M

    Gilder Grids, 200 mesh, Center-Marked, 3.05mm O.D., Rim-Mark, Molybdenum

    25 € 132,00
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 300 Mesh Grids
    no. G300 to G300N

    Order

    Art.Description Unit PriceQuantity
    G300

    Gilder Grids, 300 mesh, 3.05mm O.D., Center and Rim-Mark, Copper

    100 € 41,60
    ✓
    spinner
    G300G

    Gilder Grids, 300 mesh, 3.05mm O.D., Center and Rim-Mark, Gold

    50 € 92,90
    ✓
    spinner
    G300N

    Gilder Grids, 300 mesh, 3.05mm O.D., Center and Rim-Mark, Nickel

    100 € 51,40
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 300 Mesh Grids, Fine Bar
    no. G300HS and G300HSN

    Order

    Art.Description Unit PriceQuantity
    G300HS

    Gilder Fine Bar Grids, 300 mesh, 3.05 O.D., Rim-Tab, Rim-Mark, Copper

    100 € 77,80
    ✓
    spinner
    G300HSN

    Gilder Fine Bar Grids, 300 mesh, 3.05 O.D., Rim-Tab, Rim-Mark, Nickel

    100 € 88,40
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 400 Mesh – 400 Lines Grids
    no. G400 to G400N

    Order

    Art.Description Unit PriceQuantity
    G400

    Gilder Grids, 400 mesh, 3.05mm O.D., Center and Rim-Mark, Copper

    100 € 44,00
    ✓
    spinner
    G400G

    Gilder Grids, 400 mesh, 3.05mm O.D., Center and Rim-Mark, Gold

    50 € 102,70
    ✓
    spinner
    G400N

    Gilder Grids, 400 mesh, 3.05mm O.D., Center and Rim-Mark, Nickel

    100 € 123,20
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 400 Mesh / 400 Lines Grids, Fine or Parallel Bar
    no. G400HS and G400P

    Order

    Art.Description Unit PriceQuantity
    G400HS

    Gilder Fine Bar Grids, 400 mesh, 3.05 O.D., Rim-Tab, Rim-Mark, Copper

    100 € 84,30
    ✓
    spinner
    G400P

    Gilder Parallel Bar Grids, 400 lines, 3.05mm O.D., Rim-Mark, Gold

    50 € 98,40
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 600 Mesh Grids
    no. G600HSS

    Order

    Art.Description Unit PriceQuantity
    G600HSS

    Gilder Extra Fine Bar Grids, 600 mesh, 3.05mm O.D., Rim-Mark, Copper

    100 € 93,50
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder 600 Mesh Grids, Thick-Thin
    no. G600TT and G600TTG

    Order

    Art.Description Unit PriceQuantity
    G600TT

    Gilder Thick-Thin Bar Grids, 600 mesh, 3.05mm O.D., Center-Mark, Copper

    100 € 62,60
    ✓
    spinner
    G600TTG

    Gilder Thick-Thin Bar Grids, 600 mesh, 3.05mm O.D., Center-Mark, Gold

    50 € 158,00
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Ultra Fine Square 1000 Mesh
    G1000HS: Pitch 25 m; Hole Width 19 m; Bar Width 6 m; Transmission 57%
    no. G1000HS to G1000HSG

    Order

    Art.Description Unit PriceQuantity
    G1000HS

    Gilder Extra Fine Bar Grids, 1000 mesh, 3.05mm O.D., Rim-Mark, Copper

    25 p.o.r.
    G1000HSN

    Gilder Extra Fine Bar Grids, 1000 mesh, 3.05mm O.D., Rim-Mark, Nickel

    25 p.o.r.
    G1000HSG

    Gilder Extra Fine Bar Grids, 1000 mesh, 3.05mm O.D., Rim-Mark, Gold

    25 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Ultra Fine Hexagonal 1000 Mesh
    G1000HH: Pitch 25 m; Hole Width 19 m; Bar Width 6 m; Transmission 57%
    no. G1000HH to G1000HHG

    Order

    Art.Description Unit PriceQuantity
    G1000HH

    Gilder Extra Fine Bar Grids, 1000 mesh Hex, 3.05mm O.D., Rim-Mark, Copper

    25 p.o.r.
    G1000HHN

    Gilder Extra Fine Bar Grids, 1000 mesh Hex, 3.05mm O.D., Rim-Mark, Nickel

    25 p.o.r.
    G1000HHG

    Gilder Extra Fine Bar Grids, 1000 mesh Hex 3.05mm O.D., Rim-Mark, Gold

    25 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Ultra Fine Square 1500 Mesh
    G1500HS: Pitch 16.5 m; Hole Width 11.5 m; Bar Width 5 m; Transmission 49%
    no. G1500HS to G1500HSG

    Order

    Art.Description Unit PriceQuantity
    G1500HS

    Gilder Extra Fine Bar Grids, 1500 mesh, 3.05mm O.D., Rim-Mark, Copper

    15 p.o.r.
    G1500HSN

    Gilder Extra Fine Bar Grids, 1500 mesh, 3.05mm O.D., Rim-Mark, Nickel

    15 p.o.r.
    G1500HSG

    Gilder Extra Fine Bar Grids, 1500 mesh, 3.05mm O.D., Rim-Mark, Gold

    15 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Ultra Fine Hexagonal 1500 Mesh
    G1500HH: Pitch 16.5 m; Hole Width 10.5 m; Bar Width 6 m; Transmission 40%
    no. G1500HH to G1500HHG

    Order

    Art.Description Unit PriceQuantity
    G1500HH

    Gilder Extra Fine Bar Grids, 1500 mesh hex, 3.05mm O.D., Rim-Mark, Copper

    15 p.o.r.
    G1500HHN

    Gilder Extra Fine Bar Grids, 1500 mesh hex, 3.05mm O.D., Rim-Mark, Nickel

    15 p.o.r.
    G1500HHG

    Gilder Extra Fine Bar Grids, 1500 mesh hex, 3.05mm O.D., Rim-Mark, Gold

    15 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Ultra Fine Square 2000 Mesh
    G2000HS: Pitch 12.5 m; Hole Width 7.5 m; Bar Width 5 m; Transmission 36%
    no. G2000HS to G2000HSG

    Order

    Art.Description Unit PriceQuantity
    G2000HS

    Gilder Extra Fine Bar Grids, 2000 mesh, 3.05mm O.D., Rim-Mark, Copper, 10/vial

    Each p.o.r.
    G2000HSN

    Gilder Extra Fine Bar Grids, 2000 mesh, 3.05mm O.D., Rim-Mark, Nickel, 10/vial

    Each p.o.r.
    G2000HSG

    Gilder Extra Fine Bar Grids, 2000 mesh, 3.05mm O.D., Rim-Mark, Gold, 10/vial

    Each p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Ultra Fine Circular Aperture 2000 Mesh
    G2000HA: Pitch 12.5 m; Hole Width 6.5 m; Bar Width 6 m; Transmission 41%
    no. G2000HA to G2000HAG

    Order

    Art.Description Unit PriceQuantity
    G2000HA

    Gilder Extra Fine Bar Grids, 2000 mesh circular, 3.05mm O.D., Rim-Mark, Copper

    10 p.o.r.
    G2000HAN

    Gilder Extra Fine Bar Grids, 2000 mesh circular, 3.05mm O.D., Rim-Mark, Nickel, 10/vial

    Each p.o.r.
    G2000HAG

    Gilder Extra Fine Bar Grids, 2000 mesh circular, 3.05mm O.D., Rim-Mark, Gold, 10/vial

    Each p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Gilder Hexagonal Mesh, Standard Grids, 100 Mesh
    no. G100HEX to G100HEX-N

    Order

    Art.Description Unit PriceQuantity
    G100HEX

    Gilder Hexagonal Grids, 100 mesh, 3.05mm O.D., Copper

    100 p.o.r.
    G100HEX-AU

    Gilder Hexagonal Grids, 100 mesh, 3.05mm O.D., Gold

    50 p.o.r.
    G100HEX-CUPD

    Gilder Hexagonal Grids, 100 mesh, 3.05mm O.D., Cu/Pd Palladium Coated Copper Grids

    50 p.o.r.
    G100HEX-N

    Gilder Hexagonal Grids, 100 mesh, 3.05mm O.D., Nickel

    100 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Gilder Hexagonal Mesh, Standard Grids, 150 Mesh
    G150HEX: Pitch 165 m; Hole Width 105 m; Bar Width 35 m; Transmission 62%
    no. G150HEX

    Order

    Art.Description Unit PriceQuantity
    G150HEX

    Gilder Hexagonal Grids, 150 mesh, Rim-Mark, 3.05mm O.D., Copper

    100 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Gilder Hexagonal Mesh, Standard Grids, 200 Mesh
    G200HEX: Pitch 125 m; Hole Width 90 m; Bar Width 20 m; Transmission 70%
    no. G200HEX and G200HEX-N

    Order

    Art.Description Unit PriceQuantity
    G200HEX

    Gilder Hexagonal Grids, 200 mesh, 3.05mm O.D., Copper

    100 p.o.r.
    G200HEX-N

    Gilder Hexagonal Grids, 200 mesh, 3.05mm O.D., Nickel

    100 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Gilder Hexagonal Mesh, Standard Grids, 300 Mesh
    no. G300HEX

    Order

    Art.Description Unit PriceQuantity
    G300HEX

    Gilder Hexagonal Grids, 300 mesh, Rim-Mark, 3.05mm O.D., Copper

    100 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Gilder Hexagonal Mesh, Fine Bar Grids, 200 Mesh
    G200HH: Pitch 125 m; Hole Width 113 m; Bar Width 12 m; Transmission 82%
    no. G200HH and G200HHN

    Order

    Art.Description Unit PriceQuantity
    G200HH

    Gilder Fine Bar Hexagonal Grids, 200 mesh, 3.05 O.D., Rim-Tab, Rim-Mark, Copper

    100 p.o.r.
    G200HHN

    Gilder Fine Bar Hexagonal Grids, 200 mesh, 3.05 O.D., Rim-Tab, Rim-Mark, Nickel

    100 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Gilder Hexagonal Mesh, Fine Bar Grids, 300 Mesh
    no. G300HH to G300HHN

    Order

    Art.Description Unit PriceQuantity
    G300HH

    Gilder Fine Bar Hexagonal Grids, 300 mesh, 3.05 O.D., Rim-Tab, Rim-Mark, Copper

    100 p.o.r.
    G300HHN

    Gilder Fine Bar Hexagonal Grids, 300 mesh, 3.05 O.D., Rim-Tab, Rim-Mark, Nickel

    100 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Gilder Hexagonal Mesh, Fine Bar Grids, 400 Mesh
    no. G400HH to G400HHN

    Order

    Art.Description Unit PriceQuantity
    G400HH

    Gilder Fine Bar Hexagonal Grids, 400 mesh, 3.05 O.D., Center and Rim-Mark, Rim-Tab, Copper

    100 p.o.r.
    G400HHG

    Gilder Fine Bar Hexagonal Grids, 400 mesh, 3.05 O.D., Center and Rim-Mark, Rim-Tab, Gold

    50 p.o.r.
    G400HHN

    Gilder Fine Bar Hexagonal Grids, 400 mesh, 3.05 O.D., Center and Rim-MarK, Rim-Tab, Nickel

    100 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Gilder Hexagonal Mesh, Fine Bar Grids, 600 Mesh
    no. G600HH to G600HHN

    Order

    Art.Description Unit PriceQuantity
    G600HH

    Gilder Fine Bar Hexagonal Grids, 600 mesh, 3.05 O.D., Center and Rim-Mark, Rim-Tab, Copper

    100 p.o.r.
    G600HHG

    Gilder Fine Bar Hexagonal Grids, 600 mesh, 3.05 O.D., Center and Rim-Mark, Rim-Tab, Gold

    50 p.o.r.
    G600HHG-1

    Gilder Fine Bar Hexagonal Grids, 600 mesh, with Rim-Mark only, 3.05mm O.D., Gold

    50 p.o.r.
    G600HHN

    Gilder Fine Bar Hexagonal grids, 600 mesh, 3.05 O.D., Center and Rim-Mark, Rim-Tab, Nickel

    100 p.o.r.
    Brand: Agar

    Product
    Order
    Product

    Gilder Aperture Grids
    no. GA50 to GN2000

    Order

    Art.Description Unit PriceQuantity
    GA50

    Gilder Aperture Grids, 0.05mm Hole, 3.05mm O.D., Copper

    100 € 52,80
    ✓
    spinner
    GN50

    Gilder Aperture Grids, 0.05mm Hole, 3.05mm O.D., Nickel

    100 € 71,90
    ✓
    spinner
    GA75

    Gilder Aperture Grids, 0.075mm Hole, 3.05mm O.D., Copper

    100 € 58,70
    ✓
    spinner
    GN75

    Gilder Aperture Grids, 0.075mm Hole, 3.05mm O.D., Nickel

    100 € 76,30
    ✓
    spinner
    GA100

    Gilder Aperture Grids, 0.1mm Hole, 3.05mm O.D., Copper

    100 € 52,80
    ✓
    spinner
    GN100

    Gilder Aperture Grids, 0.1mm Hole, 3.05mm O.D., Nickel

    100 € 77,80
    ✓
    spinner
    GA150

    Gilder Aperture Grids, 0.15mm Hole, 3.05mm O.D., Copper

    100 € 54,30
    ✓
    spinner
    GN150

    Gilder Aperture Grids, 0.15mm Hole, 3.05mm O.D., Nickel

    100 € 73,40
    ✓
    spinner
    GA200

    Gilder Aperture Grids, 0.2mm Hole, 3.05mm O.D., Copper

    100 € 52,80
    ✓
    spinner
    GN200

    Gilder Aperture Grids, 0.2mm Hole, 3.05mm O.D., Nickel

    100 € 73,40
    ✓
    spinner
    GA300

    Gilder Aperture Grids, 0.3mm Hole, 3.05mm O.D., Copper

    100 € 54,30
    ✓
    spinner
    GN300

    Gilder Aperture Grids, 0.3mm Hole, 3.05mm O.D., Nickel

    100 € 66,00
    ✓
    spinner
    GA400

    Gilder Aperture Grids, 0.4mm Hole, 3.05mm O.D., Copper

    100 € 54,30
    ✓
    spinner
    GN400

    Gilder Aperture Grids, 0.4mm Hole, 3.05mm O.D., Nickel

    100 € 74,80
    ✓
    spinner
    GA500

    Gilder Aperture Grids, 0.5mm Hole, 3.05mm O.D., Copper

    100 € 54,30
    ✓
    spinner
    GN500

    Gilder Aperture Grids, 0.5mm Hole, 3.05mm O.D., Nickel

    100 € 74,80
    ✓
    spinner
    GA600

    Gilder Aperture Grids, 0.6mm Hole, 3.05mm O.D., Copper

    100 € 52,80
    ✓
    spinner
    GN600

    Gilder Aperture Grids, 0.6mm Hole, 3.05mm O.D., Nickel

    100 € 71,90
    ✓
    spinner
    GA800

    Gilder Aperture Grids, 0.8mm Hole, 3.05mm O.D., Copper

    100 € 61,60
    ✓
    spinner
    GN800

    Gilder Aperture Grids, 0.8mm Hole, 3.05mm O.D., Nickel

    100 € 75,00
    ✓
    spinner
    GA1000

    Gilder Aperture Grids, 1.0mm Hole, 3.05mm O.D., Copper

    100 € 52,80
    ✓
    spinner
    GN1000

    Gilder Aperture Grids, 1.0mm Hole, 3.05mm O.D., Nickel

    100 € 70,40
    ✓
    spinner
    GA1000M

    Gilder Aperture Grids, 1mm Hole, 3.05mm O.D., Molybdenum

    25 € 120,60
    ✓
    spinner
    GA1500

    Gilder Aperture Grids, 1.5mm Hole, 3.05mm O.D., Copper

    100 € 51,40
    ✓
    spinner
    GN1500

    Gilder Aperture Grids, 1.5mm Hole, 3.05mm O.D., Nickel

    100 € 76,30
    ✓
    spinner
    GA2000

    Gilder Aperture Grids, 2.0mm Hole, 3.05mm O.D., Copper

    100 € 52,80
    ✓
    spinner
    GN2000

    Gilder Aperture Grids, 2.0mm Hole, 3.05mm O.D., Nickel

    100 € 73,40
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder Slot Grids
    no. G1X0.2CU to G2X1.5AU

    Order

    Art.Description Unit PriceQuantity
    G1X0.2CU

    Gilder Slot Grids, 1 x 0.2mm, 3.05mm O.D., Copper

    100 € 62,70
    ✓
    spinner
    G1X0.2N

    Gilder Slot Grids, 1 x 0.2mm, 3.05mm O.D., Nickel

    100 € 90,60
    ✓
    spinner
    G1X0.2AU

    Gilder Slot Grids, 1 x 0.2mm, 3.05mm O.D., Gold

    50 € 123,40
    ✓
    spinner
    G1.5X0.3CU

    Gilder Slot Grids, 1.5 x 0.3mm, 3.05mm O.D., Copper

    100 € 62,70
    ✓
    spinner
    G1.5X0.3N

    Gilder Slot Grids, 1.5 x 0.3mm, 3.05mm O.D., Nickel

    100 € 103,20
    ✓
    spinner
    G2X0.5CU

    Gilder Slot Grids, 2 x 0.5mm, 3.05mm O.D., Copper

    100 € 49,90
    ✓
    spinner
    G2X0.5N

    Gilder Slot Grids, 2 x 0.5mm, 3.05mm O.D., Nickel

    100 € 79,20
    ✓
    spinner
    G2X0.5AU

    Gilder Slot Grids, 2 x 0.5mm, 3.05mm O.D., Gold

    50 € 108,10
    ✓
    spinner
    G2X0.75CU

    Gilder Slot Grids, 2 x 0.75mm, 3.05mm O.D., Copper

    100 € 52,80
    ✓
    spinner
    G2X0.75N

    Gilder Slot Grids, 2 x 0.75mm, 3.05mm O.D., Nickel

    100 € 106,70
    ✓
    spinner
    G2X0.75AU

    Gilder Slot Grids, 2 x 0.75mm, 3.05mm O.D., Gold

    50 € 98,40
    ✓
    spinner
    G1X2CU

    Gilder Slot Grids, 2 x 1mm, 3.05mm O.D., Copper

    100 € 62,70
    ✓
    spinner
    G1X2N

    Gilder Slot Grids, 2 x 1mm, 3.05mm O.D., Nickel

    100 € 67,50
    ✓
    spinner
    G1X2AU

    Gilder Slot Grids, 2 x 1mm, 3.05mm O.D., Gold

    50 € 101,20
    ✓
    spinner
    G1X2CU/PD

    Gilder Slot Grids, 2 x 1mm, 3.05mm O.D., Cu/Pd Palladium Coated Copper Grids

    100 € 76,30
    ✓
    spinner
    GS1X2M

    Gilder Slot Grids, 2 x 1mm, 3.05mm O.D., Molybdenum

    25 € 110,90
    ✓
    spinner
    G2X1.5CU

    Gilder Slot Grids, 2 x 1.5mm, 3.05mm O.D., Copper

    100 € 47,00
    ✓
    spinner
    G2X1.5N

    Gilder Slot Grids, 2 x 1.5mm, 3.05mm O.D., Nickel

    100 € 63,10
    ✓
    spinner
    G2X1.5AU

    Gilder Slot Grids, 2 x 1.5mm, 3.05mm O.D., Gold

    50 € 98,40
    ✓
    spinner
    Brand: Ted Pella

    Product
    Order
    Product

    Gilder Triple Slot Grid
    Three .54mm x .95mm slots in a 3.05mm copper grid., Bar width 90 m
    no. 1GC3X1

    Order

    Art.Description Unit PriceQuantity
    1GC3X1

    Gilder Triple Slot Grids, 3.05mm O.D., Copper

    100 € 68,00
    ✓
    spinner
    Brand: Agar

    Contact

    Van Loenen Instruments
    Penningweg 69 E
    1507 DE Zaandam

    Tel :+31 75 614 90 40
    E-mail  :info@loeneninstruments.com

    BTW/VAT nr. :NL804 608 180 B01
    KvK nr. :28038099

    Sign up for our News Letter

    Our partners

    © 2025 Van Loenen Instruments