Products
Embedding Molds
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
PELCO Flat Embedding Molds Blue, White or Translucent
Alphanumeric self-impression cavities, pretrimmed end.
Available in blue, white, or translucent silicone rubber.
Maximum temperature: 218 C (425 F).
Design: R.F. Bils
1 x 1.7cm x 3mm deepMold size:105 x 70 x 7mm thick
Number of cavities: | 24 | ![]() |
Numbering: | A1- A6, B1-B6, C1-C6, D1-D6 | |
Special cavities: | 2 troughs 1 x 3cm x 3mm deep | |
1 trough: | 1 x 1.7cm x 3mm deep | |
Mold size: | 105 x 70 x 7mm thick |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
105 | PELCO Flat Embedding Mold, Blue |
Each | € 33,00 | ||
105-2 | PELCO Flat Embedding Mold, White |
Each | € 17,30 | ||
10504 | PELCO Flat Embedding Mold, Translucent |
Each | € 16,00 |
![]() |
PELCO Small Flat Embedding Mold
Designed for thicker specimens. Blue silicone rubber, no numbering. Number of cavities: 12 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
106 | PELCO Small Flat Embedding Mold |
Each | € 19,50 |
![]() |
110 Flat Embedding Mold
Consecutive numbering, pretrimmed end, blue silicone rubber. Number of cavities: 20 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
110 | PELCO 20 Cavity Embedding Mold |
Each | € 24,90 |
![]() |
21 Cavity EM Embedding Mold
Single pretrimmed end with consecutive numbering. Blue silicone rubber. Number of cavities: 21 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10505 | PELCO 21 Cavity EM Embedding Mold |
Each | € 23,90 |
![]() |
Double End Tapered Embedding Mold
Pretrimmed double ends for each cavity, doubling specimen capacity. Consecutive numbering, blue silicone rubber. Number of cavities: 24 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10535 | PELCO Double End Mold |
Each | € 17,40 |
![]() |
10590 Double End Mold
Double pretrimmed ends, consecutive numbering, blue silicone rubber. Number of cavities: 21 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10590 | PELCO Double End Mold |
Each | € 20,90 |
PELCO 111 LDPE Flat Embedding Mold, Disposable
Completely disposable, translucent, low density polyethylene. Single use avoids cross contamination.
Flexible for easy block removal. Economic alternative to silicone molds.
Maximum temperature for normal embedding processes: 80 C
Maximum temperature for short duration: 95 C
Number of cavities and size:
14 for 1/8″ x 1/4″ x 1/2″ blocks
10 for 1/8″ x 3/8″ x 3/4″ blocks
Mold size: 111 x 76 x 6.4mm thick
Sold in package of 10 molds
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
111 | PELCO LDPE Flat Embedding Mold, Disposable |
10 | € 21,50 |
![]() |
Chien Embedding Mold
Cut transverse and lateral sections from the same sample. Start with position at 45 , then rotate 180 to cut transverse sections. Blue silicone rubber. Maximum temperature: 218 C (425 F). Number of Cavities: 16 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
108 | Chien Embedding Mold |
Each | € 28,30 |
![]() |
Modified Chien Embedding Mold
Cut transverse and lateral sections from the same sample. Start with position at 45 , then rotate 180 to cut transverse sections. Blue silicone rubber. Maximum temperature: 218 C (425 F). Thinner block – fits into all ultramicrotome flat specimen holders. Number of Cavities: 16 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
108-2 | Modified Chien Embedding Mold |
Each | € 29,30 |
![]() |
Disc Block Embedding Mold
Consecutive numbering, round wells, blue/clear silicone rubber. Number of Cavities: 6 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10530 | PELCO Disc Block Embedding Mold, Blue |
Each | € 18,70 | ||
10530-C | PELCO Disc Block Embedding Mold, Clear |
Each | € 16,00 |
![]() |
Ambrose Mesa Mold
Specimens are embedded against the large flat bottom surface of the mold, 7mm in diameter, for improved orientation. Blue silicone rubber. Maximum temperature: 218 C (425 F). Number of Cavities: 12 |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
107 | Ambrose Mesa Mold |
Each | € 28,60 |
PELCO Microwell Staining Mold
for immunocytochemistry
Excellent for immunocytochemistry as well as post staining.
Small, save costly reagents.
4.8mm diameter x 1.8mm deep wells.
The 60 wells are number and letter coded for better identification.
Fits into a standard petri dish.
Blue silicone rubber.
Mold size: 78 x 42 x 6mm thick.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
103 | PELCO Microwell Staining Mold |
Each | € 22,00 |
![]() |
Corticosterone Pellet Mold / Implant Mold
Animal implantation experimental application using pellets formed in the 106A. Cavities: 4.5 x 4.5 x 5mm |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
106A | Corticosterone Pellet Mold |
Each | € 20,50 |
Molds for Flat Embedding – Machined from PTFE Resin
for electron microscopy specimen embedding cured acrylics are successfully released
Especially useful when embedding with LR White, LR Gold, and Lowicryls for electron microscopy
Can be used for both low temperature UV and thermal polymerization
Unique configuration provides recesses for Thermanox Cover Slips or ACLAR film to insure anaerobic polymerization (see ACLAR under “Embedding”)
Following curing, each of the specimen blocks can be removed by flexing the Mold.
To restore flatness of the mold, simply slide it back into the provided metal Clamping Frame.
PTFE resin is nonreactive and provides durability, flexibility and ease of release.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10506 | Flat Embedding PTFE Mold with Metal Frame, 16 cavities |
Each | € 106,00 | ||
10506-10 | Flat Embedding PTFE Mold with Metal Frame, 11 size 00 cavities |
Each | € 103,90 | ||
10508 | Flat Embedding PTFE Mold with Metal Frame, 3 cavities |
Each | € 107,70 |
PTFE Flat Embedding Mold
Six tapered round openings, 34mmOD at top and 32mmOD at the bottom, 3mm deep.
The cavities are numbered 1-6 at the bottom.
(idea courtesy of Doug Price, University of Kentucky)
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10509 | Flat Embedding PTFE Mold, 6 cavities |
Each | € 115,30 |
Giammara-Hanker Cast-A-Slide Translucent Mold
survey slides, LM, TEM & STEM, HVEM cytochemistry
Silicone rubber slide mold.
Produces 2 slides, 1″ x 3″ (25 x 75mm).
Fixed vibratory microtome sections or cytochemically stained cells, post-fixed with osmium tetroxide, are dehydrated and infiltrated with resin by routine or rapid embedding methods.
The sample is placed into a mold recess and resin teased to the edges.
Photomicrography may be performed.
Selected specimens are excised, glued to blank blocks with cyanoacrylate adhesive and are then sectioned for ultramicroscopy.
Translucent.
- Reference: Giammara BL, Hanker JS, 1982. Epoxy slide embedment for LM, TEM, STEM and HVEM cytochemistry.
40th Ann Proc Elec Mic Soc Amer. Wash DC, ed. G.W. Bailey, pp 358-359.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10545 | Giammara-Hanker Cast-A-Slide Mold |
Each | € 17,60 |
Pyramid-Tip Mold
Excellent for sample preparation of specimens which are difficult to orient.
The tips easily and quickly attach to plastic cylinders.
When tip is mounted it is identical in dimensions to a BEEM 00 size capsule.
Blue silicone rubber.
- Maximum temperature: 218 C.
- Number of Cavities: 30
- Numbering: OUTSIDE of Cavities, 1-30
- Mold Size: 61 x 72 x 6mm thick
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10585 | PELCO Pyramid-Tip Mold |
Each | € 22,00 |
3mm Square Face Mold
for embedding larger specimens, uses less resin
With this mold a larger specimen may be placed in a wider tip area resulting in a larger initial section.
Once solidified the block may be glued to the end of a plexiglas rod or other holding device. (See Mounting Cylinders.)
Blue silicone rubber.
- Maximum temperature: 218 C.
- Number of Cavities: 30
- Numbering: Outside of cavities, 1-30
- Block Faces: 3 x 3mmMold Size:
- 61.5 x 72 x 6mm thick
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
10586 | PELCO 3mm Square Face Mold |
Each | € 22,00 |