Products
Castable Embedding Supplies
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
PELCO 2-Hour Epoxy Mount Kit
For optical clarity, high hardness, low viscosity and good adhesion
The PELCO Epoxy Mount Kit uses a cold embedding material designed for metallography, ceramography, geology and petrology samples.
Used for light microscopy, scanning electron microscopy and micro probe analysis.
It is low viscosity, low exotherm reaction and low shrinkage.It can be used in conjunction with vacuum impregnation to ensure complete and void-free embedding.
The cured resin is extremely hard, optically clear, and has excellent bond strength.
It gives excellent polish and edge retention to the sample.
Polymerization time is 2 hours at 77 F (25 C).
Mixing ratio is 2:1 per volume (resin 2 parts to hardener 1 part).
The 2-Hour (fast cure) Epoxy Mount Kit contains the following items: | |
813-501 | PELCO Epoxy Resin, 1 gallon (3,785ml) |
813-504 | PELCO Fast Cure Hardener (2 hour), 0.5 gallon (1,892ml) |
813-503 | PELCO Epoxy Pump, set of 2 |
128-4 | Mixing Sticks, pkg/100 |
12904-20 | Tri-Stir Beakers, 100ml, with pouring spout, pkg/20 |
12906-20 | Tri-Stir Beakers, 250ml, with pouring spout, pkg/20 |
PELCO 24-Hour Epoxy Mount Kit
for optical clarity, high hardness, low viscosity and good adhesion
The PELCO 24-Hour Epoxy Mount Kit has the same optical clarity, high hardness, low shrinkage and low viscosity as our 2-Hour epoxy kit, but with a much longer pot life (up to one hour) and slower curing (24 hours).This allows for embedding larger batches in one charge and better impregnation of porous samples.
The longer pot life gives ample time to remove trapped gas and to avoid air bubbles in the embedding.It can be used with vacuum or pressure impregnation to remove trapped gas.
The cured resin is extremely hard, optically clear and has excellent bond strength.
It gives excellent edge retention during grinding and polishing of metallographic samples.
Polymerization time is 24 hours at 77 F (25 C).
Mixing ratio is 3:1 per volume (resin 3 parts to hardener 1 part).
The 24-Hour (slow cure) Epoxy Mount Kit contains the following items: | |
813-501 | PELCO Epoxy Resin, 1 gallon (3,785ml) |
813-514 | PELCO Slow Cure Hardener (24 hour), 0.33 gallon (1262ml) |
813-503 | PELCO Epoxy Pump, set of 2 |
128-4 | Mixing Sticks, pkg/100 |
12904-20 | Tri-Stir Beakers, 100ml, with pouring spout, pkg/20 |
12906-20 | Tri-Stir Beakers, 250ml, with pouring spout, pkg/20 |
![]() |
Example: Circuit Board encapsulated using the PELCO® Epoxy Mount Kit. The clear resin allows for easy identification of the sample. |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
813-500 | PELCO 2 Hour Epoxy Mount Kit |
Each | € 568,00 | ||
813-510 | PELCO 24 Hour Epoxy Mount Kit |
Each | € 730,70 |
PELCO 2 Hour and 24 Hour Epoxy Mount Kit
Seperate components
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
813-501 | PELCO Epoxy Resin |
3,785ml | € 340,30 | ||
813-502 | PELCO Epoxy Resin |
1,892ml | € 152,90 | ||
813-504 | PELCO Fast Cure Hardener (2-hour) |
1,892ml | € 131,10 | ||
813-505 | PELCO Fast Cure Hardener (2-hour) |
946ml | € 101,50 | ||
813-514 | PELCO Slow Cure Hardener (24-hour) |
1262ml | € 207,50 | ||
813-515 | PELCO Slow Cure Hardener (24-hour) |
631ml | € 118,00 |
PELCO Epoxy Pump Set
The pumps screw directly onto the gallon, 1/2 gallon or quart bottles of resin and hardener allowing for quick, exact and clean dispensing.
The pumps dispense one fluid once per stroke.
An Insert that limits the stroke to 1/2 oz. is included to allow for correct ratio of resin to hardener.
For example: One pump would be set at full stroke for 1 oz. of resin and the other for 1/2 oz. of hardener.
If 3 oz. are required, two strokes of each pump will deliver the correct ratio.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
813-503 | PELCO Epoxy Pump, set/2 |
Each | € 54,80 |
PELCO Acrylimet
PELCO Acrylimet for quick turn-around sample embedding using a castable resin system comprising an acrylic powder with liquid solvent/ hardener.
With a room temperature cure time of 5 8 minutes following mixing, a cured hardness of approximately 85 Shore D, only moderate shrinkage and being semi-transparent, PELCO Acrylimet is ideal for quickly embedding electronic components, printed circuit board cross sections and a variety of materials science samples ready for metallographic sample preparation.
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
813-520 | PELCO Acrylimet Powder, tub |
2,27kg | € 266,00 | ||
813-521 | PELCO Acrylimet Hardener, container |
1,9kg | € 113,50 | ||
813-522 | PELCO Acrylimet Black Powder |
453g | € 166,30 |