Products
Etched Si CDMS-XY ISO
- Apertures
- Apertures 1,85 x 0,1mm
- Apertures 2,0 x 0,1mm
- Apertures 2,0 x 0,25mm
- Apertures 2,0 x 0,6mm
- Apertures 3,0 x 0,1mm
- Apertures 3,0 x 0,25mm
- Apertures 3,04 x 0,25mm
- Apertures 4,0 x 0,2mm
- Apertures 4,0 x 0,6mm
- Apertures 6.35 x 0.02mm
- Apertures 6,35 x 0,125mm
- Apertures 10,0 x 0,1mm
- Apertures 10,0 x 0,6mm
- Apertures 12,0 x 0,1mm
- Apertures 19,99 x 0,25mm
- Gilded strip apertures
- Multihole Strip Apertures
- Spray Apertures
- Thin Foil Apertures
- Tantalum Wehnelt
- Top Hat Apertures
- Aperture Cleaning
- Brushes
- Calibration
- GSR & Particle Analysis
- Light Microscopy
- SEM Calibration
- (CD) Calibration Test
- Back Scattered Electron Test
- Boron substrates
- Chessy test specimen
- Critical Dimension Magnification Standards
- Demonstration Specimens
- Glass size standards
- Gold on Carbon
- Line/Grid Standards
- Low & Medium Magnification
- MRS-3
- MRS-4
- MRS-6
- Polystyrene Spheres
- Silicon test specimen
- Tin on Carbon
- TEM Calibration
- Chemicals
- Cleaning
- Cryo Products
- Desiccators Cabinets
- Diamond Knives
- Dissection
- Embedding
- FIB Supplies
- Filaments
- Forensics
- General Lab Supplies
- Applicator, Sticks and Swabs
- Beakers, Cylinders and Containers
- Cell Strainer System
- Dishes and Boats
- Glass Bottom Dishes
- Laboratory Glassware
- Laboratory Tongs
- Microscopy Illuminators
- Microwave Specimen Holders
- Parafilm M®, Melinex Film
- PELCO Rotators
- Petri Dishes
- Pocket Scales
- Spatulas & Spoons
- Storage Jars, Containers & Bottles
- Thermometers
- Timers
- Ultraviolet Lamps
- Vials, Tubes and Cups
- Wire Mesh
- Gloves
- Grids
- Histology
- Immersion Oils
- Laboratory Tape
- Microscope Slides
- Pipettes and Pipettors
- PTFE Laboratory Products
- Razor- Microtome Blades
- Safety Products
- Slide Boxes, Trays & Mailers
- Slide Labels
- Spatulas and Spoons
- Staining
- Weighing Dishes
- Black Plastic Products
- Blades
- Brain and Tissue Matrices
- Citifluor Solutions
- Diamond Microtome Knives
- Embedding Cassettes
- Glass Bottom Dishes
- Instruments
- Microscope Slides
- PAP Liquid Blocker Pens
- PTFE Products
- Slide Boxes
- Small Animal Research
- Specimen Holders
- Staining Jars & Racks
- Tools for Neuroscience
- Carbon tabs, tapes & sheets
- Mount Storage Boxes
- Planchets
- Replication Materials
- Scintillators
- Specimen Mount Grippers
- Specimen Preparation Stations
- Starter Kits
- Stubs, Mounts and Holders
- M4 Threaded, Cylinder, and Other Stubs
- Bulk Specimen Holders, M4
- Carbon Planchet Holders, M4
- Carbon, Brass, and Copper Mounts
- Cross Section Holders
- Cylinder Specimen Mounts
- E-Beam Lithography Mount, M4
- EBSD Pre-tilt Holders & Mounts, M4
- Filter Holders, M4
- Flat Sample Clip Holders
- Hitachi T-base Specimen Holders
- Metallographic Mount Holders
- Modular Stage Adapters, M4
- Mount Adapters, M4
- Multipurpose Specimen Holder
- Pin Stub Holders, M4
- Q Pin Mounts and Holders
- Rectangular Mounts
- SEMClamp Holders, M4
- SEMClip Cylinder Mounts
- SEMClip Geological
- STEM Imaging Holder, M4
- TEM Grid Holder, M4
- Tilt Specimen Holders
- Vise Type Holders
- Wafer & Large Sample Holders
- Pin Stubs Specimen Mounts and Holders
- Adapter Buttons
- Angled Pin Stub Holders
- Bulk Specimen Holders with Pin
- Carbon, Brass, and Copper, SEM Mounts
- E-Beam Lithography Mount
- EBSD Pre-tilt Holders & Mounts
- FIB Grid Holders
- Filter Holders, Pin
- Jeol Specimen Holders
- Low Profile FIB Mounts
- Low Profile SEMClip
- Metallographic Mount Holders
- Modular Stage Adapters
- Mount Adapters
- Multi Purpose / Bulk Holders
- Multi-Pin Stub Holders
- Pin Stub Specimen mounts
- Planchet Holders
- Q Pin Stubs and Holders
- Sample Holder Sets
- SEMClamp Holders
- SEMClip Pin Mounts
- Slotted Pin Stubs
- STEM Imaging Holder
- TEM Grid Holders
- Thin Section Holders
- Variable Tilt Holders
- Vise Clamp Holders
- Wafer Holders with Pin
- M4 Threaded, Cylinder, and Other Stubs
- Cabinets for Tissue Cassettes
- Cardboard, Tin Boxes & Cans
- Gel-Pak® Substrate Carriers
- Grid Storage Boxes
- Compact Modular Cabinet
- Plastic Jars, Containers & Bottles
- Membrane Boxes
- Plastic Storage Boxes
- Slide Boxes, Trays and Mailers
- Mount Storage Boxes
- Wafer Carrier Trays
- PELCO X-TREME Cases
- Zipper, Barrier Bags
- Accessories
- Aesculap® – Forceps
- Aquarius Tweezers
- Cantilever Tweezers
- Carbon Fibre tweezers
- Dumont™ Tweezers
- General Purpose Forceps
- Industrial, Economy Tweezers
- Mount Grippers
- PELCO Tweezers
- Plastic Tipped ESD Tweezers
- Plastic Tweezers, Flat & Sharp
- Plastic, Wafer Tip Styles
- Surgical Tissue Forceps
- Wafer Tweezers
- Wafer, Component, Cover Glass
- Wire Cutting Tweezers
- Zirconia Ceramic Tweezers
Pelcotec™ Etched Si CDMS-XY ISO Critical Dimension Magnification Standard
Easy to use and very useful for quick and precise SEM, FE-SEM, FIB, CD-SEM, LM, and AFM magnification calibration.
Etched lines are provided in both X and Y axes for ease of 2 axis calibration without stage rotation
Available as NIST Traceable or as Certified against NIST Standard
Fully-featured and traceable calibration standards for a wide measurement range. They are made using the latest semiconductor and MEMS manufacturing techniques for etching features yielding superior line edge quality (Line edge roughness of +/- 0.3nm per 1um length of line edge) and are ideal for low keV imaging (≤1keV).
The Pelcotec™ Etched Si CDMS-XY Calibration Standard is available in two feature size ranges, and as traceable at the wafer level to a NIST standard (ISO 17025:2017 Sampling Scope of Accreditation) or individually certified to a NIST standard in an ISO 17205:2017 accredited calibration laboratory for a total of four versions. Recertification of these ISO critical dimension standards in an ISO 17205:2017 accredited calibration laboratory is available.
Pelcotec™ Etched Si CDMS-XY-1T-ISO
Fully traceable at the wafer level to a NIST standard (ISO 17025:2017 Sampling Scope of Accreditation). Has features from 2.0mm to 1um for a magnification range from 10x – 20,000x; ideal for desktop SEMs and low to medium magnification applications.
Pelcotec™ Etched Si CDMS-XY-0.1T-ISO
Fully traceable at the wafer level to a NIST standard (ISO 17025:2017 Sampling Scope of Accreditation). Has features from 2.0mm to 50nm for a magnification range from 10x – 200,000x; for all SEM and most FE-SEM applications.
* Pelcotec™ Etched Si CDMS-XY-1C-ISO
Individually certified in an ISO 17205:2017 accredited calibration laboratory against a NIST standard. Has features from 2.0mm to 1µm for a magnification range from 10x – 20,000x; ideal for desktop SEMs and low to medium magnification applications.
* Pelcotec™ Etched Si CDMS-XY-0.1C-ISO
Individually certified in an ISO 17205:2017 accredited calibration laboratory against a NIST standard with features from 2.0mm to 50nm for a magnification range up to 10x – 200,000x; for all SEM and most FE-SEM applications.
* Recertification in an ISO 17025:2017 accredited calibration laboratory available.
Feature sizes for the Pelcotec™ Etched Si CDMS-XY-1T-ISO and -1C-ISO are:
2mm, 1mm, 0.5mm, 0.1mm, 50µm, 10µm, 5µm, 2µm, and 1µm
Feature sizes for the Pelcotec™ Etched Si CDMS-XY-0.1T-ISO and -1C-ISO are:
2mm, 1mm, 0.5mm, 0.1mm, 50µm 10µm, 5µm, 2µm, 1µm, 500nm, 250nm, 100nm, and 50nm

500nm, 250nm, 100nm and 50nm lines are only on the Etched Si CDMS-XY-0.1T-ISO and 0.1C-ISO products
Pelcotec™ Etched Si CDMS-XY-1-ISO | Pelcotec™ Etched Si CDMS-XY-0.1-ISO | |
---|---|---|
Substrate: High conductivity silicon (resistivity of 0.001 – 0.002 Ohm/cm) | ✓ | ✓ |
Substrate size: 2.5 x 2.5mm | ✓ | ✓ |
Substrate thickness: 525 ±10µm | ✓ | ✓ |
Unique serial identification number per chip | ||
Calibration squares at 2mm, 1mm, 0.5mm, 0.25mm | ✓ | ✓ |
Graticule lines perpendicular to X and Y axes ruled at 10um, 5um, 2um and 1um pitch | ✓ | ✓ |
High Resolution version only – Additional graticule lines perpendicular to X and Y axes ruled at 500, 250, 100nm and 50nm pitch | — | ✓ |
Traceable at the wafer level to NIST (ISO 17025:2017 Sampling Scope of Accreditation) | T versions | T versions |
Direct certification of CDMS chip to a NIST standard (ISO 17025:2017 Sampling Scope of Accreditation) | C versions | C versions |
Recertification of CDMS chip to a NIST standard (ISO 17025:2017 Sampling Scope of Accreditation) available | C versions only | C versions only |
Available unmounted | ✓ | ✓ |
SEM mounts A-R available | ✓ | ✓ |
Precision better than 0.3% | ✓ | ✓ |
Line edge roughness of +/- 0.3nm per 1um length of line edge. | ✓ | ✓ |
Measurements reported with an uncertainty (k=2)* of ±0.012μm | C versions | C versions |
* Reported uncertainties represent expanded uncertainties expressed at approximately the 95%confidence level using a coverage factor of k = 2. The reported expanded measurement uncertainty is stated as the standard measurement uncertainty multiplied by the coverage factor K such that the coverage probability corresponds to the approximately 95%.
Certified to a NIST standard in an ISO 17205:2017 accredited calibration lab with features from 2mm to 1µm for magnification 10x-20,000x, ideal for desktop SEM.
Feature sizes: 2mm, 1mm, 0.5mm, 0.1mm, 50µm, 10µm, 5µm, 2µm, and 1µm
Recertification service in an ISO 17025:2017 accredited calibration laboratory available (see #713-1-RECERT in the product table below).
SEM Holders
Type | Prod. No. | Data (D=Head dia.; P=Pin dia.; PL=Pin (length) | |
---|---|---|---|
A | 16111 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
B | 16261 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY |
C | 16221 | ![]() |
9.5mm dia. x 9.5mm Cylinder, JEOL |
D | 16281 | ![]() |
15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON |
E | 16291 | ![]() |
15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON |
F | 16111-9 | ![]() |
Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS |
G | You Supply Mount or Mount of Your Choice, not listed here (contact customer service) | ||
K | 16324 | ![]() |
15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
L | 16327 | ![]() |
25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
M | 16231 | ![]() |
12.2mm dia. x 10mm Cylinder, JEOL |
O | 16115 | ![]() |
31.7mm dia. x 6.47mm, Cambridge S4 Mount |
P | 16242 | ![]() |
Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head |
Q | 16153 | ![]() |
25mm dia. x 10mm Cylinder, JEOL |
R | 16144 | ![]() |
Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
713-1 | Pelcotec CDMS-XY-1C-ISO, Unmounted |
Each | € 3.544,40 | ||
713-1A | Pelcotec CDMS-XY-1C-ISO,µmount A |
Each | € 3.574,00 | ||
713-1AFM | Pelcotec CDMS-XY-1C-ISO, 12mm AFM Disc |
Each | € 3.574,00 | ||
713-1B | Pelcotec CDMS-XY-1C-ISO,µmount B |
Each | € 3.574,00 | ||
713-1C | Pelcotec CDMS-XY-1C-ISO,µmount C |
Each | € 3.574,00 | ||
713-1D | Pelcotec CDMS-XY-1C-ISO,µmount D |
Each | € 3.574,00 | ||
713-1E | Pelcotec CDMS-XY-1C-ISO,µmount E |
Each | € 3.574,00 | ||
713-1F | Pelcotec CDMS-XY-1C-ISO,µmount F |
Each | € 3.574,00 | ||
713-1G | Pelcotec CDMS-XY-1C-ISO,µmount G |
Each | p.o.r. | ||
713-1K | Pelcotec CDMS-XY-1C-ISO,µmount K |
Each | € 3.574,00 | ||
713-1L | Pelcotec CDMS-XY-1C-ISO,µmount L |
Each | € 3.574,00 | ||
713-1M | Pelcotec CDMS-XY-1C-ISO,µmountµm |
Each | € 3.574,00 | ||
713-1O | Pelcotec CDMS-XY-1C-ISO,µmount O |
Each | € 3.574,00 | ||
713-1P | Pelcotec CDMS-XY-1C-ISO,µmount P |
Each | € 3.574,00 | ||
713-1Q | Pelcotec CDMS-XY-1C-ISO,µmount Q |
Each | € 3.574,00 | ||
713-1R | Pelcotec CDMS-XY-1C-ISO,µmount R |
Each | € 3.574,00 | ||
713-1S | Pelcotec CDMS-XY-1C-ISO,µmount S |
Each | € 3.574,00 | ||
713-1-RECERT | Pelcotec CDMS-XY-1C-ISO |
Each | € 827,10 |
Certified to a NIST standard in an ISO 17205:2017 accredited calibration lab with features from 2mm to 50nm for magnification 10x-200,000x for SEM, FE-SEM and FIB.
Feature sizes: 2mm, 1mm, 0.5mm, 0.1mm, 50µm 10µm, 5µm, 2µm, 1µm, 500nm, 250nm, 100nm, and 50nm
Recertification service in an ISO 17025:2017 accredited calibration laboratory available (see #714-01-RECERT in the product table below).
SEM Holders
Type | Prod. No. | Data (D=Head dia.; P=Pin dia.; PL=Pin (length) | |
---|---|---|---|
A | 16111 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
B | 16261 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY |
C | 16221 | ![]() |
9.5mm dia. x 9.5mm Cylinder, JEOL |
D | 16281 | ![]() |
15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON |
E | 16291 | ![]() |
15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON |
F | 16111-9 | ![]() |
Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS |
G | You Supply Mount or Mount of Your Choice, not listed here (contact customer service) | ||
K | 16324 | ![]() |
15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
L | 16327 | ![]() |
25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
M | 16231 | ![]() |
12.2mm dia. x 10mm Cylinder, JEOL |
O | 16115 | ![]() |
31.7mm dia. x 6.47mm, Cambridge S4 Mount |
P | 16242 | ![]() |
Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head |
Q | 16153 | ![]() |
25mm dia. x 10mm Cylinder, JEOL |
R | 16144 | ![]() |
Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
714-01 | Pelcotec CDMS-XY-0.1C-ISO, Unmounted |
Each | p.o.r. | ||
714-01A | Pelcotec CDMS-XY-0.1C-ISO,µmount A |
Each | p.o.r. | ||
714-01AFM | Pelcotec CDMS-XY-0.1C-ISO, 12mm AFM Disc |
Each | p.o.r. | ||
714-01B | Pelcotec CDMS-XY-0.1C-ISO,µmount B |
Each | p.o.r. | ||
714-01C | Pelcotec CDMS-XY-0.1C-ISO,µmount C |
Each | p.o.r. | ||
714-01D | Pelcotec CDMS-XY-0.1C-ISO,µmount D |
Each | p.o.r. | ||
714-01E | Pelcotec CDMS-XY-0.1C-ISO,µmount E |
Each | p.o.r. | ||
714-01F | Pelcotec CDMS-XY-0.1C-ISO,µmount F |
Each | p.o.r. | ||
714-01G | Pelcotec CDMS-XY-0.1C-ISO,µmount G |
Each | p.o.r. | ||
714-01K | Pelcotec CDMS-XY-0.1C-ISO,µmount K |
Each | p.o.r. | ||
714-01L | Pelcotec CDMS-XY-0.1C-ISO,µmount L |
Each | p.o.r. | ||
714-01M | Pelcotec CDMS-XY-0.1C-ISO,µmountµm |
Each | p.o.r. | ||
714-01O | Pelcotec CDMS-XY-0.1C-ISO,µmount O |
Each | p.o.r. | ||
714-01P | Pelcotec CDMS-XY-0.1C-ISO,µmount P |
Each | p.o.r. | ||
714-01Q | Pelcotec CDMS-XY-0.1C-ISO,µmount Q |
Each | p.o.r. | ||
714-01R | Pelcotec CDMS-XY-0.1C-ISO,µmount R |
Each | p.o.r. | ||
714-01S | Pelcotec CDMS-XY-0.1C-ISO,µmount S |
Each | p.o.r. | ||
714-01-RECERT | Pelcotec CDMS-XY-0.1C-ISO |
Each | p.o.r. |
Traceable at the wafer level to a NIST standard (ISO 17025:2017 Sampling Scope of Accreditation) with features from 2mm to 1µm for magnification 10x-20,000x, ideal for desktop SEM.
Feature sizes: 2mm, 1mm, 0.5mm, 0.1mm, 50µm, 10µm, 5µm, 2µm, and 1µm
SEM Holders
Type | Prod. No. | Data (D=Head dia.; P=Pin dia.; PL=Pin (length) | |
---|---|---|---|
A | 16111 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
B | 16261 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY |
C | 16221 | ![]() |
9.5mm dia. x 9.5mm Cylinder, JEOL |
D | 16281 | ![]() |
15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON |
E | 16291 | ![]() |
15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON |
F | 16111-9 | ![]() |
Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS |
G | You Supply Mount or Mount of Your Choice, not listed here (contact customer service) | ||
K | 16324 | ![]() |
15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
L | 16327 | ![]() |
25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
M | 16231 | ![]() |
12.2mm dia. x 10mm Cylinder, JEOL |
O | 16115 | ![]() |
31.7mm dia. x 6.47mm, Cambridge S4 Mount |
P | 16242 | ![]() |
Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head |
Q | 16153 | ![]() |
25mm dia. x 10mm Cylinder, JEOL |
R | 16144 | ![]() |
Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
709-1 | Pelcotec CDMS-XY-1T-ISO, Unmounted |
Each | € 550,00 | ||
709-1A | Pelcotec CDMS-XY-1T-ISO,µmount A |
Each | € 580,60 | ||
709-1AFM | Pelcotec CDMS-XY-1T-ISO, 12mm AFM Disc |
Each | € 580,60 | ||
709-1B | Pelcotec CDMS-XY-1T-ISO,µmount B |
Each | € 580,60 | ||
709-1C | Pelcotec CDMS-XY-1T-ISO,µmount C |
Each | € 580,60 | ||
709-1D | Pelcotec CDMS-XY-1T-ISO,µmount D |
Each | € 580,60 | ||
709-1E | Pelcotec CDMS-XY-1T-ISO,µmount E |
Each | € 580,60 | ||
709-1F | Pelcotec CDMS-XY-1T-ISO,µmount F |
Each | € 580,60 | ||
709-1G | Pelcotec CDMS-XY-1T-ISO,µmount G |
Each | p.o.r. | ||
709-1K | Pelcotec CDMS-XY-1T-ISO,µmount K |
Each | € 580,60 | ||
709-1L | Pelcotec CDMS-XY-1T-ISO,µmount L |
Each | € 580,60 | ||
709-1M | Pelcotec CDMS-XY-1T-ISO,µmountµm |
Each | € 580,60 | ||
709-1O | Pelcotec CDMS-XY-1T-ISO,µmount O |
Each | € 580,60 | ||
709-1P | Pelcotec CDMS-XY-1T-ISO,µmount P |
Each | € 580,60 | ||
709-1Q | Pelcotec CDMS-XY-1T-ISO,µmount Q |
Each | € 580,60 | ||
709-1R | Pelcotec CDMS-XY-1T-ISO,µmount R |
Each | € 580,60 | ||
709-1S | Pelcotec CDMS-XY-1T-ISO,µmount S |
Each | € 580,60 |
Traceable at the wafer level to NIST standard (ISO 17025:2017 Sampling Scope of Accreditation) with features from 2mm to 50nm for magnification 10x-200,000x for SE, FE-SEM and FIB.
Feature sizes: 2mm, 1mm, 0.5mm, 0.1mm, 50µm, 10µm, 5µm, 2µm, 1µm, 500nm, 250nm, 100nm, and 50nm
SEM Holders
Type | Prod. No. | Data (D=Head dia.; P=Pin dia.; PL=Pin (length) | |
---|---|---|---|
A | 16111 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
B | 16261 | ![]() |
Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm, AMRAY |
C | 16221 | ![]() |
9.5mm dia. x 9.5mm Cylinder, JEOL |
D | 16281 | ![]() |
15mm dia. x 15mm Cylinder, JEOL, ISI/ABT/TOPCON |
E | 16291 | ![]() |
15mm dia. x 10mm Cylinder, JEOL, ISI/ABT/TOPCON |
F | 16111-9 | ![]() |
Pin Mount: 12.7mm x 3.2mm pin. PL=6mm, ZEISS/LEO SEMS FESEMs/FIBS |
G | You Supply Mount or Mount of Your Choice, not listed here (contact customer service) | ||
K | 16324 | ![]() |
15mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
L | 16327 | ![]() |
25mm dia. x 6mm Cylinder, M4 Hitachi, Agilent / Keysight |
M | 16231 | ![]() |
12.2mm dia. x 10mm Cylinder, JEOL |
O | 16115 | ![]() |
31.7mm dia. x 6.47mm, Cambridge S4 Mount |
P | 16242 | ![]() |
Pin Mount: 12.7mm dia. x 15.7mm height, AMRAY special slotted head |
Q | 16153 | ![]() |
25mm dia. x 10mm Cylinder, JEOL |
R | 16144 | ![]() |
Pin mount: D=25.4mm; pin=3.2mm, FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
Art. | Description | Unit | Price | Quantity | |
---|---|---|---|---|---|
710-01 | Pelcotec CDMS-XY-0.1T-ISO, Unmounted |
Each | € 2.363,00 | ||
710-01A | Pelcotec CDMS-XY-0.1T-ISO,µmount A |
Each | € 2.392,50 | ||
710-01AFM | Pelcotec CDMS-XY-0.1T-ISO, 12mm AFM Disc |
Each | € 2.392,50 | ||
710-01B | Pelcotec CDMS-XY-0.1T-ISO,µmount B |
Each | € 2.392,50 | ||
710-01C | Pelcotec CDMS-XY-0.1T-ISO,µmount C |
Each | € 2.392,50 | ||
710-01D | Pelcotec CDMS-XY-0.1T-ISO,µmount D |
Each | € 2.392,50 | ||
710-01E | Pelcotec CDMS-XY-0.1T-ISO,µmount E |
Each | € 2.392,50 | ||
710-01F | Pelcotec CDMS-XY-0.1T-ISO,µmount F |
Each | € 2.392,50 | ||
710-01G | Pelcotec CDMS-XY-0.1T-ISO,µmount G |
Each | p.o.r. | ||
710-01K | Pelcotec CDMS-XY-0.1T-ISO,µmount K |
Each | € 2.392,50 | ||
710-01L | Pelcotec CDMS-XY-0.1T-ISO,µmount L |
Each | € 2.392,50 | ||
710-01M | Pelcotec CDMS-XY-0.1T-ISO,µmountµm |
Each | € 2.392,50 | ||
710-01O | Pelcotec CDMS-XY-0.1T-ISO,µmount O |
Each | € 2.392,50 | ||
710-01P | Pelcotec CDMS-XY-0.1T-ISO,µmount P |
Each | € 2.392,50 | ||
710-01Q | Pelcotec CDMS-XY-0.1T-ISO,µmount Q |
Each | € 2.392,50 | ||
710-01R | Pelcotec CDMS-XY-0.1T-ISO,µmount R |
Each | € 2.392,50 | ||
710-01S | Pelcotec CDMS-XY-0.1T-ISO,µmount S |
Each | € 2.392,50 |