Porta-Vac II

Picks up 4, 6, or 8 inch wafers (100, 150, 200mm), solar cells, disk media, or flat, hard surface items.

The Porta-Vac II kit comes with one ESD safe, molded wafer tip.
Lifts over 500 grams. A disposable 9V battery is included.

A large switch provides easy on/off control. A battery-low indicator flashes red when the battery needs to be changed or recharged.
A switch setting on the bottom of the tool allows the selection of an alkaline battery or NiMH battery discharge characteristics for the battery-low indicator.

A replaceable, internal air filter is accessible from the front of the tool.
The Class 1 exhaust filter ensures clean operation.
Rear exhaust of the pump air is standard.
An optional rechargeable battery pack and 110-220V in-stand charger is also available.

Battery Type/Hours of Continuous Running Time:
9.6Volt NiMH / 3 to 4 Hours
9 Volt Alkaline / 12 to 15 Hours
9 Volt Carbon / 4 to 5 Hours
9 Volt Lithium / 36 to 40 Hours

Vacuum:
Minimum of 15 to 20″ of mercury depending on elevation and atmospheric pressure.
Dimensions (Length x Height x Width): 185mm x 28mm x 20mm
Add 15.23mm to the length when using rechargeable battery pack.

Weight:
With Battery 171 grams