The PELCO^® Single FIB Sample and Grid Holder holds a FIB sample mounted on a pin stub for FIB milling and lift-out procedures.
It also holds two FIB grids conveniently close to the sample to mount and prepare TEM lamellae on the FIB grid for subsequent TEM imaging.

There are two height options: standard and low profile. The standard height comes with a #16111 pin stub and the pin length of the mount is 9.5mm (3/8″) while the low profile style comes with a #16176 pin stub and the pin length of the mount is 6.5mm (1/4″).

The low profile holders are primarily for systems that require shorter pin mounts and/or sample heights.
The #15487 differs from the #15489 in that the grid holder vise is rotated 90°, similar to the #15488 Double FIB Holder below, but without the second pin.
The #15489 design can be advantageous for moving the sample from the pin stub to the grid depending on the orientation of the lamella.

These compact and cost effective holders are suitable for all FIB/SEM systems which accept pin mount holders, such as the Thermo Fisher/FEI, ZEISS and TESCAN systems. For the JEOL and Hitachi systems, a pin mount adapter is needed.

The standard height (#15467) is made of vacuum grade aluminum with brass screws.
Philips screwdriver #0 included. Overall size of 15467 is 22.4 x 12.7 x 11.7mm (0.88 x 0.5 x 0.46″). Pin is 3.2mm (1/8″) diameter x 9mm (3/8″) length.

The low profile (#15487) is made of vacuum grade aluminum with stainless steel screws.
Hex key is included. Overall size of 15487 (excluding pin height) is 22.4 x  12.7 x 7mm (0.88 x 0.5 x 0.28″). Pin is 3.2mm (1/8″) diameter x 6.5mm (1/4″) length.

The in-line style (#15489) is made of vacuum grade aluminum with stainless steel screws.
Hex key is included. Overall size of 15489 (excluding pin height) is 23.8 x  15.2 x 7.4mm (0.94 x 0.6 x 0.29″). Pin is 3.2mm (1/8″) diameter x 6.6mm (1/4″) length.